IPod nano refuses to do anything

My 2gb iPod nano is stuck/frozen and refuses to do anything.
When I first got it, there was some power in the battery and I was able to turn it on, open and use features, turn it off, etc. At that point, I had not uploaded any songs to it. The next time I had turned it on, it indicated that power was low and it needed to be charged. I connected it to my computer, left it alone to charge and since then, it is locked (little lock symbol at the top of the iPod screen) and refuses to do anything.
I believe it got this way because of two reasons:
1) My computer is equiped with a USB 1.0 port only (not the recommended 2.0. I wish I had realised this earlier)
2) My computer went to sleep during the charging process (again, I wish apple had made it more apparent/made a special warning that I should've disabled the sleep mode prior to charging)
I have tried the "Five R's" as recommended (especially "Restoring" with the latest updater and "Reinstalling" iTunes), I have read some of the posts here in this forum about re-naming the drive letter of this device (which actually is not listed in my Disk Manager as it said it should have been). And none of these procedures work. My iPod continues to be locked, whether it is connected to the computer (during which I can download music to it, but cannot play them with the earphones), or if I eject it from iTunes/my computer.
What can I do to unlock it from this point (please go easy on me, I'm not an advanced computer programer/engineer).
Thank you,
Peter
HP ze4115 laptop   Windows XP  

No not a dumb question and yes, I did check that (did the resetting procedure: toggle Hold on and off, press the Menu and Select buttons for 6 sec +...).
Turns out this problem is not software related. I had a tech-rep at Bestbuy look at it and came back to say that the click wheel is non-functioning and possibly fried.
So, off for warranty repairs it goes...

Similar Messages

  • Brand New iPod Nano will not do anything

    My mother's new Ipod nano 4th generation will not do anything. It has been plugged into the USB for close to twelve hours (not in sleep mode) and it is still completely unresponsive. Shouldn't it be charged by now? The hold switch is off. It is not recognized by the computer. I have hooked it up to different computers including a brand new Macbook and it still does the same thing. I've tried resetting and restarting it using the method on the Apple site but it is still completely unresponsive. All that is on the screen is the Apple logo--nothing else.

    it's always a good idea when u first use a new ipod with a computer to restore it with the ipod updater to makes sure everything is all rosey with the format and then load up the songs so u can walk through the ipod set assistant. this should fix it right up. just restore it

  • Ipod nano will not display anything, will not charge, will not turn on/off/reset and will not show in itunes

    my ipod nano 5th generation stopped working not long ago
    i was sitting down, just listening until a song in the middle of an album ended and none played afterwards
    i went to look to see what had happened but nothing would display; it was just a black screen
    i was confused so i started to hit the menu button to see if it had just went to sleep or something
    i could hear the noises that the buttons make when you push them, but the screen stayed black
    i went to see if it would charge (via dock/stereo charger), but nothing showed up
    i then tried plugging it in (via cord) to the computer and still nothing; it would not even recognize my ipod in itunes
    my itunes is completely up to date and worked with my ipod even just a few days ago, so that shouldn't be the problem
    i've tried to reset, restore, and etc., but nothing seems to get it to turn on
    it seems like i might not be able to fix it, but is there any way i can see my files (music) on the ipod so if i have to get a new one i remember what to put on it?
    help, please ~

    Good Afternoon CPilkington1,
    If your iPod nano is unresponsive, follow the troubleshooting steps below:
    Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
    Regards,
    - Judy

  • IPod Nano refuses to power on

    I've had this ipod Nano 2nd Gen for six months. It worked great until yesterday, when I turned it off as usual, put it in my pocket, walked for a few minutes, and was unable to get it to come back on. This morning I've tried everything recommended on apple.com, including charging it, resetting it, etc. It is not recognized by iTunes.

    Check these out:
    Resetting iPod That is Unresponsive
    iPod Won’t Turn on Article
    iPod Will Not Turn On thread
    I hope this helps!

  • Help! My iPod nano refuses to play songs, won't show album pictures, etc.

    I'm not sure what I did or how I did it, as I just got my iPod nano for Christmas and am fairly new to this new technology bit, but whenever I go from Music, to Songs, or try to play a particular song in general, it won't, it just goes on and on and won't stop or play any song, except for the two I just recently updated, and it won't display the album pictures, or only will sometimes, of this one band. I'm sorry if that sounded confusing - it's the only way I know how to explain it: I press play, and it just goes on it own free will through the songs like it's shuffling, will only show little white boxes where the album pictures should be, and when it reaches the last song just goes back to the menu area. All of this disincludes the two songs I updated after I discovered this problem, thinking maybe somehow that would work - they play fine.
    It's very frustrating, because I have no clue what's going on or what to do about it. I went through the entire troubleshooting page, and nothing seems to describe my unusual problem. I tried resetting it, by 'toggling' the hold button, then holding the menu and select button until the apple logo appears on the screen. Please, please, help me.

    Hi,
    Welcome to Apple Discussions
    Ok, if resetting it hasn't worked you could try a restore:
    Restoring iPod to factory settings
    I see you're on Windows 98 - according to the Tech Spec that is not supported:
    Windows system requirements
    * PC with USB port or card (USB 2.0 recommended)
    * Windows 2000 with Service Pack 4 or later, or Windows XP Home or Professional with Service Pack 2 or later
    http://www.apple.com/ipodnano/specs.html
    As you're new to this technology then the iPod 101 might be helpful:
    http://www.apple.com/support/ipod101/
    Regards
    Colin R.

  • Ipod Nano refuses to launch automatically with itunes 8.2 on mac

    Hi all,
    I'm hoping someone can please help. I have a 2nd Generation Nano and it now refuses to launch my itunes 8.2 automatically and therefore I am unable to get to my ipod's music at all via my mac.
    I used to get the DO Not disconnect logo flash up on screen, but this NO longer activates. It does however still charge the ipod fully via the USB cable provided.
    I've now had to resort to uninstalling 8.2 and trying to work with 8.01, but this doesn't appear to have rectified the problem. I have yet to restore the ipod but was hoping I could avoid that option.
    If anyone has experienced anything similar or has a solution to the problem please get in touch.
    Sal
    Message was edited by: Icklesal

    pictures illustrating the problem:
    "iPhone" is an album containing 111 photos. No photos actually appear even after syncing - as shown by the capacity bar at the bottom:
    http://i42.tinypic.com/30mo2ev.jpg
    Note: I've tried syncing just ONE photo (inside AND outside iPhoto) and it doesnt work.
    Also tried under Windows XP and syncing ONE photo. Didn't work either. (also running iTunes 8.2 as I don't have an old version to try...)
    iPod Photo Cache is created correctly. Tried deleting and recreating it. Definitely works.
    http://i41.tinypic.com/1217og4.jpg
    If I use something like the demo of Ecamm Phone View ( http://www.ecamm.com/mac/phoneview/ ) to view the contents of the iPhone, it is clear that NONE of the iPod Photo Cache thumbnails got transferred to the iPhone. (If i manually transfer it into the Photos folder the photos work – of course, until iTunes syncs again as it then deletes all the photos once again.)
    Tried restoring iPhone - no help.
    Clearly the problem is sporadic (as not many ppl have reported it) but yet, for those that are affected, it stops something that has worked before.

  • Ipod nano freezes cant do anything

    i was going threw my songs and when i cliked on 1 it just froze i tried pluging it in to the computer but nothing happnede so right now im just waiting for the battery to die but if this happens agin and instead of waiting for the battery to die is there a way to fix this faster?

    My iPod is too freezed, can't do nothing...
    neither reset... some another solution would be great ...
    I'm too waiting for the battery to discharge

  • Help! My iPod nano just keeps shuffling thru my music

    iPod nano won't play anything. Just shuffles. I've tried a rest & a restore
    to factory settings, but, nothing seems to be working. Any & all
    suggestions will be greatly appreciated! 
    Thanx. Annie

    That was supposed to read, I've tried resetting & also
    a restore to factory settings. Sorry abt that

  • I have a ipod nano and i think it wont charge no more

    i have a first or second gern.. ipod nano and is there anything that can be done i think its going to be the end of it

    Sounds like the repeat setting has been enabled.  See your iPod's User Guide for information on how to turn it off.
    http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
    B-rock

  • IPod Nano 5th generation and iTunes library

    Any way to get songs on my iPod Nano 5th generation into my iTunes library?  Sync doesn't work.
    Lost a lot of my iTunes library recently due to a sync mistake. (I know, I'm an idiot.)  Much/most of the same music is still on my iPod Nano.  But something tells me Apple doesn't want me to get it back into my library so I have to buy it all over again...?  Would a tech at Apple store be able to do something for me?
    Not optimistic.

    Hello lilooloool,
    To get music off your iPod nano, you can transfer anything that was purchased from the iTunes Store. You can also just download any purchased songs from the iTunes Store as well without having to sync. Take a look at the article below for steps on how to do either option. 
    Download past purchases
    http://support.apple.com/en-us/ht2519
    Re-download or transfer your iTunes Store purchases from an iPhone, iPad or iPod to a computer
    http://support.apple.com/en-us/HT201267
    Regards,
    -Norm G.  

  • I just bought an Ipod Nano for my husband from a friend. We cannot figure how to add songs. I have an Ipod Touch and everything I pull up on Itunes is dealing with mine...I can't do anything with his Nano. What are we doing wrong?

    I purchased an Ipod Nano from someone yesterday. How do I register it in my name and unregister the previous owner. I have a 4th gen Ipod touch and was told I could add songs from my library to the nano but we can't seem to do anything with it. HELP please!!

    Connect it to your computer and restore it as a new device. Then chose what music you want to sync with it and do so just like your Touch does.

  • So,I just got my iPod Nano fixed.For them to fix it they had to clear all my songs.When I plug it in it says you must restore it to use in windows.It also says it may delete songs,off of my iPod or laptop?Do I restore it?Will it do anything to my iTunes?

    So, I just fixed my iPod Nano fixed. For them to fix it they had to clear all my songs. When I plug it into my Toshiba laptop it says you must restore it to use Windows. It also says it may delete songs to return to factory settings, but will it delete them off my iPod or my laptop since I don't have any on my iPod? Do I restore it? Will it delete anything off my iTunes or nothing? I really need to know!

    Have you downloaded and installed the latest version of iTunes from here:
    http://www.apple.com/itunes/download/

  • IPod Nano Gen 7 won't respond to *anything*.

    I have a 7th Generation iPod Nano that's worked flawlessly until today, when it won't turn on or respond to being plugged into anything. I've tried using two different iPod USB cords (one that also worked flawlessly until today and a backup one that I didn't even take out of the factory packaging until a few days ago). I've tried using a USB to wall outlet converter to plug the iPod directly into a socket to charge it, which doesn't affect it at all. My iTunes (which I uninstalled and reinstalled just today and ensured that it was completely up-to-date) doesn't recognize it. Many of the troubleshooting pages say to hold down the hold/sleep button until the apple logo appears, but this doesn't work either.
    Honestly, all signs point to it being irreparably broken, but I can't think of ANYTHING that could have caused it. It just looks like it's out of battery, but when plugged in, it doesn't respond at all. Has anyone else had such a problem? Do I just need to let it charge for a while before it seems to respond, or do I need to let it drain completely first? It's possible that it's already drained, though, because I haven't used it since yesterday and it could have drained overnight.
    Thank you in advance. I'm very worried here.

    Hello AzureEnergy,
    The following article provides information and troubleshooting steps that can help get your iPod Nano back up and running.
    iPod won't turn on
    http://support.apple.com/kb/TS1383
    Cheers,
    Allen

  • I have my ipod nano 5th generation and when i plugged it to my computer it is recognized but i cant do anything. On the ipod all i can see is a black screen with the apple sign! How can i fix this?

    I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?

    Howdy Lumagofe,
    I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
    All the very best,
    Sterling

  • My IPod nano (older version) is frozen, so I can't do anything, and all of the online "help" things say that the IPod icon should appear under "Devices" but it's not, and because the IPod's frozen... What should I do???

    My IPod nano (older version) is frozen, so I can't do anything, and all of the online "help" things say that the IPod icon should appear under "Devices" but it's not, and because the IPod's frozen... What should I do???
    <What's the difference between a message and a question?>

    Which older model iPod Nano do you have?  iPod Models
    Read the user manual for a solution - iPod Manuals
    A question ends with a "?" mark and a message ends with a "." period.

Maybe you are looking for

  • Production Order Report with Cost

    Hi, I am trying to create a report using query to show the production order details, including the components item code (can be inventory or non-inventory), issued qty, component cost of each component and product cost. Can anyone help? Thanks.

  • Error while trying to publish a web service in UDDI client

    hi   i m getting this error when trying to publish my web service in UDDI client.I have configured my uddi client using Visual Administrator.I created a  local test registry.The name of my  registry is QuickCarRentalRegistry_Local.I created this at a

  • SSD problem on E531...

    Last year i purchased an E531, i7 2.2, 8GB, along with a ADATA Pro SP900 128GB SSD, which i installed immediately, replacing the original 24GB that came with the E531. Windows 8.1 was installed on the SSD, while the built in 1GB hard was used for fil

  • Want to use a Firewire external drive as my boot drive, few questions thoug

    I have an old second gen ppc mini. My hard drive just died. It's been on it's last legs for months, but today it finally stopped booting totally. Ran a hardware test and the drive is bad. Instead of having to open it, I'd rather just buy an external

  • Flashplayer doesn't work

    Hi it's been quite a long time since my flashplayer has shut it. If I'm opening a site it says that i should (re)install the newest Flashplayer again. I have done that more than 20 times but it still doesn't help. I'ved checked several possible sollu