IPod nano runs through songs too fast to hear them

Hello!
I'm useless with anything technical so I would be very greatful if anyone can advise me on this or has experienced a similar thing. Thank you very much, Clare
nano   Windows XP  

Try resetting the iPod by toggling Hold on and off, then holding Menu and Select for 6-10 seconds, until Apple logo shows up on the screen.
If that doesn't work, try updating the software, if it isn't already. (New software was released 3-23)
A last resort is Restoring the iPod through the iPod updater. This will wipe your iPod's memory, so you'll ahve to re-put all of the songs onto it through iTunes.
I hope this helps!

Similar Messages

  • Ipod nano cycles through song titles in playlist:

    Gateway   Windows XP  
    When I try to play any song in the "purchased" or "newly added" playlists on my wife's nano pod it cycles through all of the song titles. I cannot get it to play any of the songs I select. It just continues to cycle through all of the titles. I know this is a malfunction because my 30gig Ipod does not function like this. I can select and play any song in any playlist. I'm thinking perhaps there is a setting I need to change.
    Gateway   Windows XP  
    Gateway   Windows XP  

    It doesn't sound like a settings issue to me.
    Try resetting the iPod by toggling Hold on and off, then holding Menu adn Select for 6-10 seconds until Apple logo shows up.
    If that doesn't work, make sure it has the most up-to-date software (version 1.1.1 released 3-23).
    If the problem continues, try restoring the iPod through the iPod Updater. This will wipe the iPod's memory clean, so you'll have to re-put the songs onto the iPod through iTunes.
    I hope this helps!

  • My ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.

    my ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.

    Found this solution in another thread, what you want to do is go into the Nike Fitness thing, go to run, go to Spoken Feedback and set it to off. This should fix your problems.

  • Please help: My iPOD just runs through the playlist. Doesn't play anything.

    My iPOD just runs through the playlist. Doesn't play anything. The songs do exist physically on the device.
    I tried updating the iPOD but still the problem was not solved.
    Is there any way by which I can play the songs without downloading them again on iPOD?
      Windows XP Pro  

    I just had the same exact problem. It's like the Nano was forwarding thru the songs by itself..nothing would play!
    So I went and looked at the manual, which suggested I try resetting it first. I did, and it worked! Here's what I did:
    The manual instructed me to turn the "hold" switch on & off. Then it said to hold down the Menu and center button at the same time, until the Apple logo appeared. Then in a few moments the main screen came back on...and I was able to play songs again.
    Hope this works for you, good luck!
    Dell 2400   Windows XP  

  • Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?

    Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?

    Either redownload them directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    or sync them to your iPod via iTunes
    iTunes: Syncing media content to iOS devices and iPod            

  • Why can't I get my ipod nano to shuttle songs

    I cannot get my ipod nano to shuttle songs.

    This is the user guide PDF for the 7th gen nano
    http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
    On page 18-19, note the shuffle songs button on the Now Playing screen.  It looks like two arrows crossing.  Tap that to shuffle songs on the current list.

  • Why does my latest generation ipod nano spontaneously change songs

    Why does my latest generation ipod nano spontaneously change songs and what can I do to control or prevent it?

    Seems logical and likely to fix it.  Have 3 locations where it was happening and will test and get you your ten points if all tests well.  Thanks.

  • HT4623 Does anyone have an issue with your iPhone 5 when trying to play music? Mine won't, on the screen you see the player run through songs very quickly but never playing.... Help!

    Does anyone have an issue with your iPhone 5 when trying to play music? Mine won't, on the screen you see the player run through songs very quickly but never playing.... Help!

    Try this > Start a song, tap the screen, under the left side of the scrubberbar that appears, tap the icon to stop shuffle.

  • New computer, same ipod nano. cant access songs

    i just got a new laptop and all my songs are on my old computer. i have an ipod nano 2g. i know i have to transfer them using an external drive or disc. but is there a way to transfer them off my ipod? alos when i use itunes on my new notebook it says that the ipod is synced with another library and i cant get my songs on it! please help....

    Connect your iPod to your computer. When you get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • HT201272 I bought a new Ipod Nano and purchased songs on Itunes.  How do I download the songs from the computer to my new ipod

    I bought a new Ipod Nano and purchased songs on Itunes.  How do I download the songs from the computer to my new ipod

    Connect the iPod to your computer and select it on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 on your computer then you can enable the sidebar via option-command-S on a Mac, control-S on a PC), and then on the right-hand side you can use the Music tab to select which of your music that you want on the iPod.
    Syncing music : http://support.apple.com/kb/HT1351

  • IPod nano went through the wash

    My iPod nano went through the washing machine and the dryer. I have already left it in rice for 2 days, it didn't have a charge when it went through. It was already dead. Please help me. I tried charging it and am still waiting

    I plugged it up to iTunes and it recognized it. It would play the music off of it to. I guesnthe displaynis faulty because of how IT DOESNT TURN ON

  • HT1386 i synced my iPod because i had songs i wanted to transfer them to it and it keeps telling me that the sync is complete and i should disconnect it and when i disconnect it i didn't  find any songs. please help!

    i synced my ipod because i had songs i wanted to transfer them to it and it keeps telling me that the sync is complete and that i should disconnect the ipod from my computer but when i disconnect it i find that no songs are on my ipod. can you please tell me what to do? thank you

    If the songs you're trying to transfer were purchased on iTunes.... i think they can let you redownload it FREE OF CHARGE.

  • HT4534 i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
    I also have this problem...........

  • IPod Nano (2nd Generation) song skipping halfway through song

    This only happens with one song on my new ipod nano.
    So I go to listen to this song. Let's say the song is Tourniquet. So, I get 2:47 through the song. It freezes up then, stays there for a couple of seconds, and skips to the next song. Always in the same place. Then I'll go to go back to the song, and it'll go to the song before Tourniquet.
    Is there any way to fix this? I've already tried resetting, and that doesn't do anything.
    Windows XP

    Mine does this too. Have you found an answer?

  • Ipod Nano full - no songs displayed

    Dear nano-users,
    I bought the nano just 7 days ago,
    first I experienced the disconnect problem, that even if i eject the nano on the display of the nano it told me not to disconnect.
    Then I put the software update on it.
    Now I don't see the nano on itunes displayed anymore.
    Nor does Itunes start up, when I connect the nano by usb.
    Even worse:
    On the nano display there aren't any songs anymore!
    'About'-menu: 0 songs, capacity 3.7GB, available 51.1 MB
    I did a reset several times on the nano - but didn't change anything.
    Now at the moment I can't use it at all.
    Your comments or any help highly appreciated. Thanks.

    Make sure you have iTunes 6.0.4 and iPod Updater 2006-03-23.
    Try putting your iPod into disk mode before connecting and attempting the restore.
    http://docs.info.apple.com/article.html?artnum=93651
    If you are not able to restore your iPod nano, try connecting it to your computer and waiting for your iPod to become recognized by Windows.
    Once it is recognized by Windows, open up My Computer and look for either an Apple iPod or a Removable Disk. Right click on it, then click on format, then click on quick format, then click on start.
    Usually, when you do this, your computer will become really slow to respond to your commands. It's important to be patient with it, and not to click on the same thing too many times. Doing so will only make the process take longer.
    Best wishes,
    CG
    P.S. I've been hearing a lot of talk about problems with the iPod nano and the latest updater. Apple's tech support is fee-based, but you do get 1 free call within the first 90 days. If you're not able to resolve this issue through the steps above, you might want to consider giving them a call about this. Make sure you get your case number from them before they end the call, though, in case you have any more problems regarding this issue.

Maybe you are looking for

  • Ke30 report navigation

    hi, may i know what is the navigation in ke30 report? after the selection screen execution, report comes out. u will notice before the item line report, there is 1 part called navigation with icon. what is this navigation doing? thanks

  • [SOLVED] wine-1.3 xorg-1.8 ati catalyst x86_64 starcraft2 black

    My system: Arch x86_64,Ati radeon hd4850,wine-1.3 or latest git,Catalyst-10.7. So what i do have are these black areas displayed around game. Happens in every possible graphic tweak and setup with wine. Appears also in wine version 1.2 and it doesnt

  • IBooks Author ( interactive image )

    Hi to everyone, I have a problem with an interactive image in iBooks Author. i've added the image in .jpg format and all the interactive "buttons" with own interactivity zoom for each one. When I test it on the working area, it works correctly even i

  • Hang on Install of Mountain Lion

    Hi; I have two machines with Lion installed. I'm moving to Mountain Lion. I successfully installed ML on my Air but I'm having problems on my MBPro. It's an Intel Pro with enough space and RAM. I've backed up and turned off virus and malware programs

  • How to access parallel ports using LabVIEW?

    I want to send data to a device which is connected through LPT1.when Iam using serial port write.vi with port number 10(for LPT1) it is giving an error code 37 which means the device not found. whether those vis are only for accessing serial ports? T