Ipod nano stuck after use win8 update

hi all ,
i just update my ipod nano by win 8 , but after update screen stuck there & show "ok to disconnect " , try to plug back system message show is on recovery mode , restore few time still same error occur , anyone know how to solve ?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

My ipod is stuck after trying to update

my ipod tried to update itself thru iTunes, and now i cant even turn it on.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have an ipod nano 4GB and use pc windows xp . since last year my ipod didnt sync any new songs saying "the ipod cannot be synced the required folder couldnt be found" and when i try to update the itunes version another error occured. plz HELP!!!!!!!!!

I have an ipod nano 4gb and use pc with windows XP. since last year my ipod suddenly didnt want to sync any new songs saying " the ipod "MOAMEN" cannot be synced. the required folder couldnt be found" and when i try to update the itunes version another error occurs and i dont know when i tryed to format ipod i didnt find "format" button. so plz give me suggestions instructions i extremely bored !!!!!!!!!!!!!1

Uninstall/Reinstall iTunes then try to rebuild the library.
http://support.apple.com/kb/HT1925 (uninstall/reninstall)
http://support.apple.com/kb/HT1451 (recreate library)

HT1495 I use method 3 to sync my iPad to my desktop which is used to sync my iPod nano. After I done all the steps,how will I sync the separate library to my iPad? I don't see any sync option and don't even see my iPad on the device.

My iPad is registered in a different account.im having difficulty installing iTunes on my laptop so when I read that multiple iPod,iPad etc can be sync in one computer,I tried making a separate library on my desktop which have an iTunes already.i used my desktop for my iPod nano. After following the instructions, I don't know how to sync it with my iPad now connected on my desktop.i can't see a button or option to sync. And I don't even see my iPad recognize on the device.pls tell me what am I missing. I already sign in so my desktop will be authorize.

All devices only sync what you select to sync.
If you do not want all of the music, then simply do not select all of the music to sync.

HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes. I have the latest version of iTunes. Windows has all the most recent updates too. I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

Already tried another USB port, still nothing.
I don't have another PC to check, I only have one which is the one not working with my iPod.
It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
Please help

I have ran the diagnostics test on iTunes and iPod. The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability. What can I do? iPod nano 3rd generation. All updates are current.

I have ran the diagnostics test on iTunes and iPod. The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability. What can I do? iPod nano 3rd generation. All updates are current.
It had not been used for awhile and most of the songs that were on there were gone when I turned it on. I was trying to sync to update the library.

sklshrnk wrote:
It had not been used for awhile
Weeks, months, years? It's possible your battery is dying. Take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.
Syncing Music to iPod

Since I updated to itunes 11, my ipod nano 6th generation won't update?

Since I updated to itunes 11, my ipod nano 6th generation won't update?
I wanted to add in my Christmas playlists and most recent purchases, when it wouldn't get past syncing the second song a couple of times, I tried restore and lost everything because it still wouldn't sync. Then I tried to sync to my old computer which isn't itunes 11, and doesn't have my latest songs on it. My ipod did sync then though, so it seems to be a conflict between my version of ipod nano and the latest version of iTunes??????
Has anyone had the same problem? is there a solution??

Hey eamonn27
Thank you for using the Apple Support Community. Due to the nature of your issue, you may find more information by using another one of Apple's support resources.
Express Lane
https://expresslane.apple.com/GetproductgroupList.action
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My computer no longer seesmy 3rd generation ipod nano. after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect. how to I get the ipod back onto my computer?

my computer no longer seesmy 3rd generation ipod nano. after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect. how to I get the ipod back onto my computer?

Hello rh3362,
I would start with this:
http://support.apple.com/kb/TS1369
Hope this helps.
~Julian

Ipod nano not being recognized since update

Ok, so everything was fine until i had to update my ipod nano(right around when the updated itunes came out). Since then, my ipod nano would connect sometimes, for a min. or two, or not at all. Now, it wont even connect, light up, charge, anything! It's not being recognized by My Computer, Windows, nothing.
I have tried reinstalling the software with the instilation disc, but all it did was pop up with an error saying im missing some file, and that only happened once. I know that its not the cable because the charger works and i know its not the usb port because other things still work in it. Also, i have plugged it into the back usb port, to no avail.
PLEASE HELP!

Hey i am having exactly the same problem its really strange!! I have tried everything i can think of to fix it, reinstalling the USB drives and everything but it still wont recognise my ipod! HELP!!

Do you need a converter to charge Ipod nano (5th gen) using a non-Apple wall charger/plug adapter in Switzerland?

do you need a converter to charge Ipod Nano (5th gen) using a non-Apple wall charger/adapter plug in Switzerland? or is the Ipod Nano dual-voltage?

None of the iDevices are multi-voltage themselves...the chargers from Apple are all 110-240 volt. You will have to look at the non-Apple charger you have and see if it says it handles 110-240 volts. Most made today are capable of that range, or they would have to make a different item for each country.
All you probably need is a plug-pin converter, can find those in the airport, at least in Zurich, don't know about Geneva.

Will the iPod nano 7 get a new update from the current 1.0.3?

Hey Guys I was wondering will the iPod nano 7 get a new update from the current 1.0.3?
If anyone knows or has and info or rumors pleas tell me.
Thanks
email *****
<edited by host>

Apple might release small updates for 4th generation iPods touch if they find serious issues like the FaceTime problem that made Apple release iOS 6.1.5 for the 4th generation iPod touch. However, this device won't receive any major iOS update.
The 4th generation iPod touch has got 256 MB of memory, and iOS 7 devices have got 512 MB or more of memory

Ipod screen gone white after using 2006 updater!

hi...my 5th generation video ipod has just had an update and the screen froze after i removed it... the screen then instead of resulting in the apple logo turned white and it is stuck like that. When i try again to restart it only turns black for a while makes a few beep noises and then the screen turns white again .... HELP!

Apple engineers have determined that this is caused by not allowing the firmware update to finish the installation before disconnecting the iPod.
If the reset previously mentioned doesn't help, then put the iPod into forced disk mode, and use the updater to restore the iPod.
With your iPod not connected to the computer, reset it for about 5 seconds.
Then press and hold the select and the play/pause buttons for another 5 seconds or so. Then it should be in disk mode.
Wait until the restore has finished before disconnecting the iPod. If you're unsure, wait at least 20 minutes (it's probably overkill but best to be sure).
That should cure the issue.
If however it doesn't, and your iPod is still non responsive (doesn't reset, nothing on the screen or button presses don't work), then it will have to be sent away for service.

Recharge iPod nano 3G after each use, or wait until flat before recharging?

In order to optimise both the capacity of an iPod nano 3G battery (how long it lasts between charges) and its longevity (how long it will last before it has to be replaced) should the battery be charged up to full after every significant period of use (typically 2 hours playback in my case) or should charging not happen until the battery is flat or almost flat?
Also, does anyone have any thoughts on my other iPod nano 3G question, which is at:
http://discussions.apple.com/thread.jspa?threadID=1589301
Many thanks.

Charging your iPod battery
http://docs.info.apple.com/article.html?artnum=61127
iPod: About the battery charge status icon
http://docs.info.apple.com/article.html?artnum=60970
Li-Ion Batteries
http://www.apple.com/batteries/
Tips and tricks to get the most out of your iPod's battery
http://docs.info.apple.com/article.html?artnum=61434
Cheers,
Patrick

My videos I took using my ipod nano disappeared after syncing.

I had 5 videos on my ipod nano that I took yesterday. When I hooked my ipod up to my computer (Toshiba) the ipod did the sync thing. The videos disappeared off my ipod. I have no idea where they went because I cannot find them on my computer or on my itunes. Can some please help me?

Hello ctay122,
Have you checked your iPod to see if they are still there? Videos you take on the iPod are not automatically copied to iTunes. They need to be manually copied to your computer through Windows explorer. See this article for more help and instructions.
http://support.apple.com/kb/HT3837
B-rock

IPod Nano stuck in recovery mode

Hi,
I recently installed iTunes 7 on my new work PC and connected my iPod Nano (1st gen) to it for the first time. I was told that iTunes had detected an iPod in recovery mode and it needed to restore factory settings. I proceeded with this, and after this completed iTunes suggested I needed to update the software on my iPod, which I also completed (from 1.1 to 1.3)
My problem is that every time I plug my iPod in, iTunes tells me that it has detected an iPod in recovery mode, and needs to restore factory settings. When I do this, factory settings are restored, iTunes redects the iPod, and the same message comes up again, about iTunes detecting an iPod in recovery mode.
I seem to be stuck in this loop, and don't know what to do to fix it. I have tried all the obvious things (PC restart, different USB port, lastest iTunes software) but none of these seem to fix the problem. I cannot copy any music to my iPod.
I am very grateful for any help you can provide.
Thanx
Mark
Pentium 4 Windows XP Pro

okay, that relentless "recovery mode" message can sometimes be produced by a Windows drive letter confusion. for troubleshooting advice on that, see the following document:
"iTunes has detected an iPod in recovery mode - Use iTunes to restore"

Ipod nano stuck after use win8 update

Similar Messages

Maybe you are looking for