Ipod nano stuck in disk mode and reset mode

My ipod which I haven't used for long came into my sight and i triedto use it and the battery was out. OK, so I charged it through my computer Windows XP with the usb. Of course my itunes program detected my nano. And it kept telling me to upgrade my nano so I clicked OK. after 2or 3 mins it was completed and it said to wait until nano reboots itself. But it won't... so i pulled it out.
Ok when i turned it on the gray screen with the apple logo in the middle appeared. It won't move anymore so I resetted it by pushing the center and the menu button and endless circulation began. 4secs later it blacked out and right after, the gray screen appeared again and again..until the battery wasout ..So I came here and knew about the center and play button so I tryed it worked so I was able to see my ipod on my itunes ,which did not appear before,and now it keeps on telling me to restore it because it was damaged. so I did. and now it came back as new. I wrote my new apod name ...etc. and after that I pulled it out. now it's stuck in disk mode and I can't move on,,,
I'm sorry the article is long but please help me!

Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

Similar Messages

  • IPod Nano stuck in DISK MODE - HELP!

    How do I get my iPod Nano out of DISK MODE?
    When I went to turn it on it was in DISK MODE. How did it get set to DISK MODE?
    Thank you.

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • IPod nano stuck in Disk Mode

    my ipod froze on the apple logo screen so i found disk mode advice
    but how do i get out of disk mode or am i supposed to do something on the computer?
    i have enable disk use or whatever but that just makes it unresponsive
    help please!

    Hello thismac,
    In order to take the iPod out of Disk Mode, you will have to reset the iPod. To do this, press and hold the Center and Menu buttons together until the Apple logo appears. That should do the trick.
    If you are getting no response from the iPod while attempting to reset it, you may have to wait for the battery to die, then hook it up. If you can get it to appear in iTunes, it would be a good idea to restore it via iTunes as well.
    Otherwise, there really isn't much else you can do for an unresponsive iPod that you cannot reset or get iTunes to recognize.
    Hope this helps.
    B-rock

  • Please Help, My ipod is stuck in disk MODE...

    My ipod is stuck in disk mode, I try to reset it but it doesnt work. I tried using ipod updater to restore it, but i only get "Firemare update failure. Disk write error." If you have any suggestions please post

    Well my itunes doesnt even read my nano. Right now all I want to do is just restore it but...it keeps saying "Firmware update failure. Disk write error." So how do i restore my ipod if i keep getting this error?
    Oh yeah, the reason my nano is in disk mode is cause my pc restarted while i was uploading music into it.

  • My ipod is stuck in disk mode when connected to computer.

    Hello, my iPod is stuck in disk mode when I connect it to my computer. iTunes will not recognize the device is connected, but it still shows up in my computer. When I restart the iPod, it tells me to go to iTunes to restore, then immediately shuts off. How can I restore it?

    Please see the  More Like This  section on the right.

  • My 2nd generation iPod nano screen is showing lines and I cannot see the whole menu. How can I fix this problem?

    I believe that my wife disconnected the iPod nano (2nd Gen.) improperly and now the screen has a whole bunch of lines. I can see the screens moving when I move to the next screen. But it's just lines. Any help would be greatly appreciated.

    well unfortunatley your warranty is over so the device is not covered,  BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen).  You can try to restore your ipod to your computer to see if it might be some kind of software related issue.  Just restore to the last sync you have on iTunes.  But FIRST...I would try to Reset your ipod.
    Go to Settings>General>Reset> Reset all settings.

  • My Ipod nano 7th generation turned off and won't turn back on. what should I do?

    my Ipod nano 7th generation turned off and won't turn back on. what should I do?

    If you have done the reset and nothing appears and you are sure it still has a charge and it doesn't turn on, you may request for a replacement if it still covered by the warranty. Cheers!

  • My iPhone 4S is stuck at spinning wheel in reset mode what can i do?

    my iPhone 4S is stuck at spinning wheel in reset mode what can i do?

    This has just started happening to me. It also plays songs, but with different track titles and artist name etc, displaying from a completely different song.
    iPhone 4S on iOS 5.0.1.

  • Ipod nano not recognized by pc and will not turn on

    ipod nano not recognized by pc and will not turn on

    iPod not recognized in 'My Computer' and in iTunes for Windows 

  • My ipod nano was synced by itunes and removed all of my music and game files. I am in the process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

    My ipod nano was synced by itunes and removed all of my music and game files, and replaced my music with my kids music that they have put into the current itunes library. My music is nowhere to be found on my computer, so now  I am in the long, forever process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

    Contact iTunes support and explain your situation to them.  They may let you redownload it at no cost.
    http://www.apple.com/support/itunes/contact.html
    If they don't, I'm afraid you'll have to purchase it again.  Sorry.
    B-rock

  • TS1363 I'm trying to set up my new ipod nano, it appears in windows and not in itunes- if I reinstall itunes, will the files of other ipod users on the computer be lost?

    I'm trying to up my new Ipod Nano, it appears in Windows and not in Itunes, if I reinstall Itunes, will files previously set up by other Ipod users sharing the computer be lost?

    You said " I sign in but her music list shows up mixed with about 1/3 of mine."
    Sign in where?
    What music list?
    It also sounds like that computer is not authorized for the account. You can only have 5 computers authorized for one account. If yo go to iTunes>Store>View account and then sign in it will tell you how many (but no what computers) are authorized. There is no way to find out what computers are authorized.
    You can deauthorize all computer once a year.
    See:
    iTunes Store: About authorization and deauthorization

  • Bought a new iPod nano.  Trying to download and install latest version of iTunes, but it says I need OS 10.7 or greater to install it.  I have 10.58.  What to do?

    Bought a new iPod nano.  Trying to download and install latest version of iTunes.  When i try to  install downloaded program, I get a message that says OS10.7 is required.  I have OS10.58.  What to do?

    Choose About this Mac from the Apple menu.
    If you have a PowerPC Mac, buy a new, secondhand, or refurbished Intel Mac.
    If you have an Intel Mac, phone the online Apple Store and order a Mac OS X 10.6 DVD.
    (71523)

  • IPod nano 3rd gen turnes off and on by itself

    I have a problem: my iPod nano 3rd generation turns off and on by itself every 5-7 seconds.
    How can I solve this problem?

    Is there a case around this iPod? It might be pushing on the touch wheel. Does it happen when you flick the lock switch? If so it seems like a restore is in order
    Try the 5 r's http://www.apple.com/support/ipod/five_rs/nano3gen/

  • Can you connect and ipod nano 4/5th generation with and ipad to download music/update software

    Can you connect and ipod nano 4/5th generation with and ipad to download music/update software.
    If so how do you go about it and what equioment are you required to purchase.

    No you cannot.

  • My iPod nano, 5th generation is frozen and will not respond. There is a charge, was just used 2 hrs ago, and has a song showing on the face but will not turn off or respond

    MMy iPod nano 5th generation is frozen and will not respond.  There is a picture of a an artist on it, it has a charge, was used fine 2 hrs ago, won't turn off ?..

    Good Afternoon CPilkington1,
    If your iPod nano is unresponsive, follow the troubleshooting steps below:
    Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
    Regards,
    - Judy

Maybe you are looking for

  • New to Logic 9, Questions about mixing with summing box.

    Hello - glad to be aboard. I just picked up Logic9 last week.. I have been on DP...well since it was P (I guess 20yrs,) Been contemplating the move for quite some time, but as I too, pay the bills with music, I've got to stay on DP until I and Logic

  • Dynamically append values to http url in BPEL http bindings

    hi , I have a requirement where I have to post an xml over the http url 'http://todm2344:67033/access/auth'. I have created a wsdl file with http bindings and the schema that this url expects and invoked that wsdl from my bpel process. But now the re

  • Photo Duplicate FInder for OS X 10.5.8?

    Photo Duplicate FInder for OS X 10.5.8?

  • OC4J Deployment with JMX

    Hi, I'm trying to deploy my .ear to OC4J. I've recently added JMX to the project. From what I've found about JMX and OC4J, the MBeanServerFactory is required. If I do not use the factory and just use the MBeanExporter (autodetect=true), I get a succe

  • Can't build new guest OSes in 2.1.1

    Hello all, Under OracleVM 2.1, I was able to build a large set of VMs of various OSes. Currently, I've upgraded my entire farm to OracleVM 2.1.1, and I don't seem to be able to create VMs using either PXE or NFS. I always get this error when trying N