IPod nano stuck in Disk Mode

my ipod froze on the apple logo screen so i found disk mode advice
but how do i get out of disk mode or am i supposed to do something on the computer?
i have enable disk use or whatever but that just makes it unresponsive
help please!

Hello thismac,
In order to take the iPod out of Disk Mode, you will have to reset the iPod. To do this, press and hold the Center and Menu buttons together until the Apple logo appears. That should do the trick.
If you are getting no response from the iPod while attempting to reset it, you may have to wait for the battery to die, then hook it up. If you can get it to appear in iTunes, it would be a good idea to restore it via iTunes as well.
Otherwise, there really isn't much else you can do for an unresponsive iPod that you cannot reset or get iTunes to recognize.
Hope this helps.
B-rock

Similar Messages

  • IPod Nano stuck in DISK MODE - HELP!

    How do I get my iPod Nano out of DISK MODE?
    When I went to turn it on it was in DISK MODE. How did it get set to DISK MODE?
    Thank you.

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • Ipod nano stuck in disk mode and reset mode

    My ipod which I haven't used for long came into my sight and i triedto use it and the battery was out. OK, so I charged it through my computer Windows XP with the usb. Of course my itunes program detected my nano. And it kept telling me to upgrade my nano so I clicked OK. after 2or 3 mins it was completed and it said to wait until nano reboots itself. But it won't... so i pulled it out.
    Ok when i turned it on the gray screen with the apple logo in the middle appeared. It won't move anymore so I resetted it by pushing the center and the menu button and endless circulation began. 4secs later it blacked out and right after, the gray screen appeared again and again..until the battery wasout ..So I came here and knew about the center and play button so I tryed it worked so I was able to see my ipod on my itunes ,which did not appear before,and now it keeps on telling me to restore it because it was damaged. so I did. and now it came back as new. I wrote my new apod name ...etc. and after that I pulled it out. now it's stuck in disk mode and I can't move on,,,
    I'm sorry the article is long but please help me!

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • Please Help, My ipod is stuck in disk MODE...

    My ipod is stuck in disk mode, I try to reset it but it doesnt work. I tried using ipod updater to restore it, but i only get "Firemare update failure. Disk write error." If you have any suggestions please post

    Well my itunes doesnt even read my nano. Right now all I want to do is just restore it but...it keeps saying "Firmware update failure. Disk write error." So how do i restore my ipod if i keep getting this error?
    Oh yeah, the reason my nano is in disk mode is cause my pc restarted while i was uploading music into it.

  • My ipod is stuck in disk mode when connected to computer.

    Hello, my iPod is stuck in disk mode when I connect it to my computer. iTunes will not recognize the device is connected, but it still shows up in my computer. When I restart the iPod, it tells me to go to iTunes to restore, then immediately shuts off. How can I restore it?

    Please see the  More Like This  section on the right.

  • Ipod is stuck on disk mode

    hi
    my ipod nano is stuck on disk mode' i tried holding the menu and center buttons for a few seconds but it dosent help
    any other sujestions?

    Is the Hold switch in the OFF position?  Even if it is in the OFF position, try moving it to the ON position and back to the OFF position, as it says to do in the procedure document for a Reset
    http://support.apple.com/kb/ht1320

  • Ipod is stuck in Disk mode

    I have reset the ipod twice, connected to my computer and Itunes, synced the device, yet it remains stuck in disk mode.

    Hold down the center button along with the menu button and then your ipod will turn of
    After that step has been completed and your ipod is switched off you turn your ipod back on but press the play/pause button so that it switches from disc mode to non-disc mode.
    Well then your ipod is back to shape and you can carry on listining to your music!
    Source: http://wiki.answers.com/Q/How_do_you_remove_the_iPod_from_disk_mode
    Hope this helps.

  • My ipod is stuck on disk mode...

    my ipod mini is stuck on disk mode and it says ok to dissconnect and when i disconect it is still says it wat do i do?

    Michael,
    Reset your iPod...
    http://docs.info.apple.com/article.html?artnum=61705
    btabz

  • Help! My iPod is stuck in disk mode!

    So yesterday my computer didn't recognize my iPod. I followed different directions but non of them seemed to work. Then I put it into disk mode. Now the only way to put songs on my iPod and charge it is by putting it into disk mode. Now it's stuck there. Everytime I try reseting it will stay on the apple logo screen. From there all I can do is put it back in disk mode.
    Help me get it out of disk mode and load songs normally! I would be very grateful!
    30GB iPod   Windows XP  

    Xox: Rather than reset....Restore your iPod.
    To turn disk mode off, open iTunes with the iPod connected, edit/preferences/ipod/music. Enable disk mode is at the bottom. If it is greyed out, change your Music update option to manual, uncheck enable disk mode and then set your music update option back to what you want.
    David

  • Ipod mini stuck in disk mode wont reset

    Hey,
    My iPod mini is stuck in disk mode, either displaying "ok to disconnect" or "do not disconnect" and won't reset.
    When connected to my PC, iTunes does not notice the iPod, although it does show up in "my computer". When I try to run an iPod updater to restore the iPod, it either takes forever and I end up pushing CTRLALTDEL, or it comes up with the error message "cannot mount iPod".
    I already know how to reset an iPod mini, having done it many times before. I've removed and reinstalled iTunes and iPod updater many times and it's making no difference.
    So what can I do? I've had so many problems with iPod mini since I've had it. Every couple of months I end up stuck in front of my computer trying to fix it. Can anyone help me, or is there a way of contacting apple for a replacement?
    Thanks
    PC   Windows XP  

    Hi
    First of all thanks for your reply, but...
    Please try to plug your iPod with the AC charger and press "select"+"menu" keys- to get out from disk mode
    OK, did that, now I get the folder icon, or if I then try to reset the mini, it goes back to disk mode.
    When I plug it into the PC now, it does kind of a loop. It goes from Mac logo to folder icon to "do not disconnect" to "ok to disconnect", then repeats. The PC is not recognising the ipod at all now.
    PC Windows XP

  • TS1441 Ipod classic stuck in disk mode

    My ipod classic is stuck in disk mode, computer/itunes won't recognize, i've tried resetting, but either says "ok to disconnect" or "restore with itunes."  When i plug it in, the computer nor itunes recognize that it's plugged in.... please help.

    The best way to get out of this situation is to use a well-known tool called TinyUmbrella.
    First of all download TinyUmbrella  http://thefirmwareumbrella.blogspot.in/
    Now, making sure your device is connected to your computer, launch TinyUmbrella
    It will automatically detect that your iPod is stuck in recovery mode
    Select the Exit Recovery button and it should throw your iPod touch out of recovery.
    Alternatively, you can right-click on your iPod name from a list at the side
    of TinyUmbrella and select Kick out of recovery.

  • Ipod photo stuck in disk mode and screen is in Black and white

    came to use my ipod photo after about a week of not using it. when i took it out the colour screen was in black and white and the screen is stuck to saying it is in disk mode with a large tick.
    the ipod will mount and does show up in itunes it will even play songs via itunes. i have tried resetting to no avail and my next option was to restore to factory settings which i am loathe to do as i have songs on my ipod that are no longer in my itunes library.
    anyone had similar issue or can suggest a fix
    thanks

    well the problem has been solved...hope this may help others having this issue.
    i basically just let the battery run out, then connected the ipod to my laptop and voila...it reset and all is well again...
    pretty random, but glad it is all working again.

  • IPod Nano stuck in recovery mode

    Hi,
    I recently installed iTunes 7 on my new work PC and connected my iPod Nano (1st gen) to it for the first time. I was told that iTunes had detected an iPod in recovery mode and it needed to restore factory settings. I proceeded with this, and after this completed iTunes suggested I needed to update the software on my iPod, which I also completed (from 1.1 to 1.3)
    My problem is that every time I plug my iPod in, iTunes tells me that it has detected an iPod in recovery mode, and needs to restore factory settings. When I do this, factory settings are restored, iTunes redects the iPod, and the same message comes up again, about iTunes detecting an iPod in recovery mode.
    I seem to be stuck in this loop, and don't know what to do to fix it. I have tried all the obvious things (PC restart, different USB port, lastest iTunes software) but none of these seem to fix the problem. I cannot copy any music to my iPod.
    I am very grateful for any help you can provide.
    Thanx
    Mark
    Pentium 4   Windows XP Pro  

    okay, that relentless "recovery mode" message can sometimes be produced by a Windows drive letter confusion. for troubleshooting advice on that, see the following document:
    "iTunes has detected an iPod in recovery mode - Use iTunes to restore"

  • Help! iPOD Nano stuck in recovery mode.

    My 2G nano is stuck in recovery mode. iTunes always says to restore the ipod, but after the restore is done, the message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." This hapeens over and over.

    Have you tried fully reinstalling iTunes?
    First, disconnect your iPod from your computer.
    Start out by going to "Add or Remove programs" in Control Panel.
    Find "iTunes" on this list, and remove it.
    Then, go to the iTunes download page to install the latest version of iTunes (7.1.1.5).
    After that has fully installed, restart your computer.
    After the computer has loaded, reconnect your iPod to your computer, and see if you still get the "recovery mode loop" happening.
    Not sure if it would work, but I guess it's worth a try.
    -Kylene

  • IPod Nano stuck in charging mode

    First generation iPod Nano is stuck in charging mode. I can still use the menu, select items, play music. It is recognized on Mac when connected. When connected to the computer, the battery icon in the corner shows it is charging, as normal. But when I disconnect from computer or from external charger, the battery icon continues to show it is charging. When it should go to sleep, the large flashing charging icon shows instead. It stays like that all the time. I can't even put it to sleep using the menu. It just sits there with the flashing battery icon until it completely runs out of power. I've tried to reset it several times. It goes through the reset, but continues to follow the pattern of thinking it is recharging when it should be asleep. Any ideas which part of it isn't working right, and what I might be able to do to fix it? Thanks!

    Hello doggydaddy55,
    The following article details further steps that can be taken in such a situation.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/TS1441
    Cheers,
    Allen

Maybe you are looking for

  • SSO To J2EE engine of ABAP+JAVA Addin Install

    Hi all, I have setup an SAP system as a ABAPJAVA Addin Install.  The system is running NW04s SP11.  I have an SAP Portal installed on the JAVA side to support some BW functions.  I would like to do SSO from the users desktop directly to the portal co

  • Creation of multiple files as per  segment repeating multple times  in IDOC

    Hi SapAll. i have got a  requirement where in an IDOC to File Interface pi need to create 3 different files with same content but with different names based on single Idoc-Segment. its an IDOC to 3 File Inteface. the file names will be determined by

  • E6 Belle & Wireless N

    Hello, all. Has anyone else esperienced having trouble connecting to a Wireless N router? I usually connect to my roommate's Netgear router on the Thinkpad that I'm using (and connected to) now, is shows this router as having two access points - one

  • How to Define an Item which is Produceble and Buyable....in R12

    Hi Let us assume there is a Product XYZ which intend to make and as well intend to buy from other sources, how to define this item ixyz n Master Item of Oracle inventory and how to assign Make/Buy in General planning tab.(since for this item I want t

  • Code to navigate to certain state during long idle time.

    My question is aimed at trying to keep my program from burning in an image on a monitor or just to navigate my program back to the begining when there is a long idle time. Does anyone know of the code that can be used inside of FC? My program is runn