Ipod Nano Stuck on Apple Logo

My Ipod Nano seems to be stuck on the apple logo. I tried a hard reset and it did nothing and itunes isn't recognizing it. When a similar thing happend to my Ipod Touch i was able to boot into recovery mode and restore a backup. Does Ipod Nano have the same mode?

Hello Elektra2009,
And welcome to Apple Discussions!
I am no guru when it comes to iPod touches, but I do know that nano has no feature like that. However, if you have already tried a hard reset, I would try manually putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363]. If you can do that, and get iTunes to recognize it, I think it would be an excellent idea to restore as well.
Hope this helps.
B-rock

Similar Messages

  • My iPod Nano Stuck in Apple Logo

    My iPod Nano 3rd gen. stuck in apple logo. I did the reset thing and yes --it reset but will stay in Apple logo. I also tried the disk mode thing --and it did not work. What should I do???

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
      - Wait if it is an Apple problem

  • Ipod Nano stuck on apple logo screen

    So my little brothers Ipod Nano 4th generation is stuck on the Apple logo screen. I've reset it a couple of times, but it won't leave the apple logo screen. I wasn't able to get it into disk mode, and my laptop wasn't regonizing it, but two days ago our desktop's Itunes recgonized it. Is there anything else I can do, or is it time to take a trip to an Apple Store? Any help would be, well, helpful

    but two days ago our desktop's Itunes recgonized it
    Since the desktop was able to recognize it, did you restore it in iTunes?
    B-rock

  • IPod nano stuck on Apple logo; won't boot.

    I have an iPod nano that seems to charge, but won't boot. There's no sad iPod logo or anything, just the Apple logo. I can boot it into diagnostics mode, and it seems to be fine. However, it won't go into disc mode.
    Any advice?

    This tread (http://www.thestudentroom.co.uk/showthread.php?t=723183) is about the same problem you're having. At some point it's said:
    "Hold down Select / Menu (to reboot the iPod)
    As soon as the Apple logo appears, hold down Rewind / Select until...
    ...you see a backwards Apple Logo.
    At this point, you will have entered Diagnostic Mode. It'll test the RAM, and then tell you to HIT PLAY TO CONTINUE. Hit 'Play'.
    You'll be in a menu that you advance by hitting FF (Fast Forward). Advance to the 'DISKMODE' entry.
    Hit 'Select.' This will put you into Firewire Disk mode. The screen should change to the familiar 'Do Not Disconnect' mode. At this point, connect it to the computer.
    Run the restore utility; it should now recognize the iPod and offer to Restore the factory software. Do so. You'll lose whatever's on it, but you'll avoid having to send it back in to Apple and paying repair fee."
    You can also look here: http://www.command-tab.com/2006/03/31/fixing-a-frozen-ipod/ and http://support.apple.com/kb/TS1399?viewlocale=en_US

  • My iPod touch stuck in apple logo.I try to recovered ,but after recovery start its says error message comes and says try later.what should i do ?

    my iPod touch stuck in apple logo.I try to recovered ,but after recovery start  error message comes and says try later.what should i do ?

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
      - Wait if it is an Apple problem

  • 2nd generation nano stuck on Apple logo

    My 2nd generation nano is stuck on the Apple logo, although the logo does flash on and off every few seconds. It is possible to put the nano into disc mode and access its content through iTunes. I've tried "restore" and the process is completed to the point of saying the iPod is being restarted, and to wait for it to appear in the iTunes window. Unfortunately, it never shows up in iTunes and the iPod itself ends up back in the Apple-logo-flashing mode.
    Any suggestions? Help would be appreciated.

    Thanks for the suggestions. I've tried the 5 R's as well as the suggested procedure in the link. Unfortunately, the problem persists.
    One issue I've wondered about is whether or not a dead battery could play a part in this problem. It seemed that battery charge retention was becoming a issue for a while before this problem started. It's hard to know now if the battery is charged or not, as the iPod will only function in disc mode when it's attached to the computer through a USB link. When I attempt to charge the iPod through an adaptor and a wall outlet, the battery charge icon does not appear on the screen; then, as at all other times, the only thing that is visible on the iPod screen is the Apple logo. I don't see how the battery could be the only problem, however, since the iPod is recognized by the computer (iTunes) only when it's in disc mode.

  • IPod Touch stuck on Apple Logo HELP!!!

    My iPod Touch 4g is stuck on the Apple logo. I have tried the home button and power button together and it keeps going back to the Apple Logo. And then it is stuck there. Please help!!!

    http://ipod.about.com/od/iphonetroubleshooting/f/Iphone-Stuck-At-Apple-Logo.htm
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • IPod Touch stuck at Apple logo

    My iPod Touch 2nd generation is stuck at Apple logo and won't turn on. It won't connect to iTunes either. Help.

    I am having this same issue. My battery died and now when I hook it into the computer Itunes doesnt recognize it and it wont load past the apple logo. I have tried resetting and holding down the buttons but nothing works

  • My ipod is stuck on apple logo.

    I have tried resetting it but again it is stuck on apple logo.How can i fix it??please help me. =/

    Have you tried here:
    iPhone and iPod touch: Frozen and unresponsive
    Next would be to let the battery fully dain. Then charge and try again.

  • IPod mini stuck on apple logo

    I played a song on my ipod mini and it crashed so I tried reseting it. Now its stuck on the Apple logo. I tried plugging it into the computer but no luck. Please help.

    Try these basic troubleshooting steps one at a time.
    The Five Rs.
    iPod shows only an Apple logo and doesn't start up.
    When restoring the iPod, it's often useful to put it into disk mode first.
    Putting iPod into disk mode.

  • My iPod is stuck on apple logo and I get a 1434 Error when trying to restore it.

    Hello, I hope somebody can help me. I have a 120 gb ipod classic (6th generation). I purchased it a long time ago. It was working fine for a few years and then suddenly it's been stuck on the apple logo ever since.
    I tried to restore it by putting in on disk mode and connecting it to my Mac. My iTunes recognizes the device (But my Mac doesn't!). On iTunes, I tried to restore it, but I get an error message 1434, stating that the restoration could not be completed.
    I read that I should try to erase the drive with Disk Utility, but when I get there, the button to erase the drive is unclickable. I tried to partition as well, but it also did not work (maybe I am doing it wrong? Could somebody direct me with better instructions?)
    I'm wondering if the hard drive is dying, or if I have a bad ribbon, or if the logic board itself is broken. Not sure what method of action I should take. I can't even get into the diagnostic screen.
    PLEASE HELP!

    Hello E1777,
    You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
    iTunes 11.0.4
    http://support.apple.com/kb/dl1614
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • IPod Nano 7th Generation Apple Logo staying on screen

    Hey guys, I had just bought myself this iPod today and had it for an hour listening to music and when i put it to sleep could not get it to wake up again.
    I tried to reset it and the Apple Logo showed up but stayed like this and no matter how many buttons I pressed it would still stay on the screen.
    It stayed on the screen for a couple of hours then went black.
    When I plug it into my computer iTunes doesn't recognise it.
    If (when plugged in) I hold the Sleep/wake + home button down and let it cycle twice the the reset process a sound will beep to signigy that my computer has recognised it and a message will appear on iTunes telling me to download the recovery program for my iPod.
    When I click continue the iPod wakes up and again disconnects from the computer and keeps the Apple Logo on screen.

    Hi magostin,
    Welcome to the Apple Support Communities!
    In situations where your iPod nano is not recognized in iTunes, I would suggest the troubleshooting steps in the attached article. Please use the troubleshooting for Windows or Mac in the article depending on what type of computer you are connecting to. 
    iPod not appearing in iTunes - Apple Support
    Cheers,
    Joe

  • Ipod nano 6th generation apple logo flashing

    I have an ipod nano 6th generation that when connected to the computer USB it flashes the apple logo.  When not connected, it does not turn on at all.  I have tried all the reset tricks with no impact.  Also, my iTunes does not even recognise it as being connected to the computer.  Any ideas I haven't explored yet?

    Hi magostin,
    Welcome to the Apple Support Communities!
    In situations where your iPod nano is not recognized in iTunes, I would suggest the troubleshooting steps in the attached article. Please use the troubleshooting for Windows or Mac in the article depending on what type of computer you are connecting to. 
    iPod not appearing in iTunes - Apple Support
    Cheers,
    Joe

  • Ipod 5 stuck on apple logo screen

    last night(about 22 hours ago) i tried to update my ipod 5 to ios 8.2 I clicked the install button and then left my ipod on my desk charging. I came back about an hour later and it was stuck on the apple logo screen but with no progress bar. Every minute or so so about 10 minutes it started to glitch out and shut down right when the lock screen would show up. It has been on the apple logo screen since then and i just got back from school to find it stuck. Occasionally it will get a little dimmer, but about a minute later it will be bright again.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod touch stuck on apple logo screen and empty loading bar

    This is what happened. I got a friend who knows how to download games in my ipod touch.  But as it turned out He broke it
    He cant restore it. I tried DFU mode the restoring. and even Redsnow! its just stuck on a Apple logo and an empty loading bar under it.
    and when you look at itunes it says "waiting for ipod" but it doesn't do ANYTHING! i left it like that for 2 days and it haven't load a single bit.
    please help. if you have an answer please give the steps. Ive been searching for the past two weeks on my own and i can't fix it.

    Try mstarting with the bold
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How to convert Report Builder output to .XLS

    Dear All, Let me please know how to convert the Report Builder output to Excel Format. As there are having the facility to convert the output in .PDF or .HTML format but i want to convert that into Excel Sheet...... Please Guide me in this regards Th

  • Accessing Servlets in Browser

    Hi all I am new to servlets and till now everything went well but one thing! :) I am trying to access a servlet I did through the browser. When I added the servlet class to the ROOT/WEB-INF/classes dir I could access the servlet by typing http://loca

  • SQL Developer 3.2.09 and excess memory usage

    This is really something that will ultimately end up as a bug-fix request, I'm thinking, but I was wondering if anyone else is seeing the same thing, before I report it. We're using SQL Developer 3.2.09 in a Citrix environment, and we're finding that

  • Material Component to Network - BAPI_NETWORK_COMP_ADD

    hi, has anyone come across this SAP problem? I use BAPI_NETWORK_COMP_ADD to add a material to a Network. It adds fine, and shows up in CJ20N. However, if you go to the Plan/Actual Cost (CN41), there is no cost associated. Okay. I used BAPI_NETWORK_CO

  • Looking for software driver for HP 6655A Power Supply with Labview 5.1

    Hi, trying to control an HP 6655a Power Supply but the version of Labview in the PC is the old Labview 5.1. I don't want to upgrade it for fear that the program will no longer function. Does anyone have the driver for the HP6655a that will work with