IPod nano touch only no longer works on dock

I have a iPod nano touch 6 th generation that no longer charges and/or plays on my Logitech S751i dock.
My first generation iPod nano plays on this dock without any problem.
Any solution? Suggestion?
Thanks in advance...

This is the iPod touch forum. I requested the moderators move your post to the iPod Nano forum.

Similar Messages

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • We have a second generation Ipod Touch that no longer works.Will Apple let you trade it in for a refurbished Ipod Touch?

    I have a @nd gen Ipod touch that no longer works..Can I trade it in for a refurbished IPod?

    See it this 10% discount covers a refurbished one. I know it covers purchase of a new one.
    Apple - Recycling Program for iPod and Mobile Phones

  • My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

    My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

    I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
    - Restore from backup via iTunes. This will install a fresh copy of the iOS. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.          
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!

    my ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!

    Hi kahli:
    Have a look at  http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf
    AND
    http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • Ipod nano touch 6g ecran blanc

    Bonjour
    Je possède un ipod ipod nano touch 6g qui est bloqué en éran blanc.
    Impossible d'accéder au menu diagnostique.
    L'interface revient quand je fait la restauration de l'appareil par itunes, mais ne reste pas quand je l'éteind.
    Je peux l'utiliser uniquement en clef usb de 16 Go pour le moment.
    La restauration a été testé sur Windows 7 et sur MacOs 10.6.8 le problème reste identique.
    Celui-ci vient de chez apple suite à un échange SAV (donc pas une contrefaçon enfin je l'espère) et n'a jamais été démonté.
    Pouvez vous me dire d'où vient le problème ? Car je trouve la clef de 16Go un peu cher.
    Merci d'avance pour vos réponses.

    Rough translation via Google:
    Hello
    I have an ipod touch ipod nano 6g is blocked LCD white.
    Unable to access the diagnostic menu.
    The interface comes back when I made ​​the restoration of the device by iTunes, but do not stay when I turn off.
    I can only use 16 GB USB key for now.
    The restoration has been tested on Windows 7 and Mac OS 10.6.8 the problem remains the same.
    It comes from apple after an exchange service (not an infringement at least I hope) and has never been removed.
    Can you tell me where is the problem? Because I think the key to 16GB a bit expensive.
    Thank you in advance for your answers.
    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • Update 10.2.2 older ipod/iphone sync cables no longer work.

    Update 10.2.2. I updated to 10.2.2 and my older ipod/iphone sync cables no longer work. Im talking about the cables with the longer connector and the connector locks not the new style that is a short plug with no lock. Anyone else having this issue?
    Tried normal steps, reinstall restart etc. No change. I'm at work and the cable works fine on 10.2.1.1 something in the update must have changed.

    On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
    Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
    You won't lose any content, you're not deleting that, just the programs that access them.
    What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
    My iPad and iPod did exactly the same thing and this is how I fixed it.

  • My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

    My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

    If the Reset didn't work, you'll need to do a Restore.
    From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad.

  • My ipod nano touch isnt turning on or connecting to my computer

    how can i fix my ipod nano touch 6 gen..? its been like 2 weeks without my ipod, and i tried and tried to "hold the wake/sleep button and the volume down" but it doesnt work! what am i suppose to do?

    Follow the steps here > iPod nano Troubleshooting
    Reset / Retry / Restart / Reinstall / Restore

  • Apps On Ipod Nano (touch screen)

    Can you get apps on the ipod nano touch??? im thinking about buying one, but i want to be able to get apps

    No the touchscreen iPod Nanos can not use apps. If you want a touchscreen ipod capable of apps your only option is the iPod Touch.

  • How do I get my ipod nano touch to sync my music

    We are attempting to attach our son's ipod nano touch to our home library. There are actually two issues: The first issue is from the account we created for him, we can't get the songs we purchased for him to sync to his ipod. The second issue is that we want to know how to get selected (and only selected) songs from our shared library to his ipod without adding our entire library. Can you help us out?

    Is the Manually manage music and videos option ticked from under this tab as well?  If not, what configurations do you have made from under your iPod's Music tab?
    B-rock

  • I can't get songs to load onto ipod nano touch

    My brand new iPod Nano will only load 18 songs of the over 100 in my library. I tried synching several times and that didn't work. Then I tried selecting and dragging them to the iPod, which in iTunes looked like it was working, but they are not on my Nano. What's up?

    If you have a bunch of pictures or video on your Nano, you might be out of space. Otherwise, it may just be that the music is in the wrong format for your iPod. Try removing it from iTunes and adding it to the library again, making sure to say "yes" to the converting prompt.

  • 2GB ipod nano will only allow 40 songs and not 500.

    My little sisters ipod nano will only allow forty smoething songs to be downloaded on it, but isn't 2GB supposed to get around 500? There is nothing else on it except music so there isn't anything else taking up memory space. And yes I have restored it numerous times. Please help!

    Make sure that the Music files are compressed formats if you want to get the m ost out of the cpacity of your iPod. When the iPod is "advertised" as "500 songs" or what have you, it is based on circumstance that the song is an AAC format (.m4a) and I think an average of 4minutes long.
    AAC is as small as you can get. Make sure the tracks are in that format, if they are already, then the tracks must be quite long.

  • My iPhone seems to be in visual impaired mode, and the touch screen no longer works.  How do I get back to normal mode?

    My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works.  I have tried rebooting the phone without success.  How can I get back to normal mode?

    I solved my own problem by clicking the home button 3 times.

Maybe you are looking for

  • Improving load times in Linux LabVIEW executable

    I'm looking for (simple) ways to improve the loading times in a Linux LabVIEW executable. We're using a low performance, low cost CPU board, and loading times are terrible. The CPU is capable of doing everything after the application is loaded, but t

  • ITunes wont open it says...

    iTunes wont open it says...                 iTunes cannot run because some of its required files are missing. Please reinstall iTunes. HOW DO I DO THAT? AND HOW WILL I KNOW IF IT KEEPS EVERYTHING THE SAME?

  • Can I authorize more than five computers on one iTunes account?

    Can I authorize more than five computers on one iTunes account?  I have several PC's being used as HTPC's and I'd like to use iTunes on all of them.  My three iPhones and three PC's have taken up all of my authorizations.  If I need to create a secon

  • Problems installing iTunes 10.2.1 -installation source is not available

    I've tried to download the upgrade to 10.2.1 a number of times with no success. I keep getting the error message: Windows Installer The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alt

  • Process in a .java file

    Hello, I have IOExeption when i use a process to execute a System command such as dir/p or start rmiregistry. What can i do?? This is my code: Runtime r = Runtime.getRuntime(); try { Process p = r.exec("dir/p"); Process p1 = r.exec("rmiregistry"); }