IPod Nano turns itself on, and won't stay off

Hi, everybody!
I've had my iPod Nano for about two years now, and have noticed this problem occasionally, but it usually goes away and it has never been this bad.
Here is one scenario: I turn my iPod off by holding the play button. The screen fades to black. I move to set my iPod down, and it immediately lights up again. I press and hold the play button, but instead of turning off, the iPod begins to play music. I pause the song and press and hold again. The iPod fades to black, but again lights up the minute I move my hand.
Here is another scenario: the iPod has been off for several hours. Suddenly, it lights itself up. I pick it up and turn it off, but it again continues to light up as it sits on the desk.
This, of course, runs down the battery--I've had to charge my iPod every day for the past few days because it kills itself, waking up over and over when I'm not around to turn it off again. I'm used to only needing to charge it every few days.
I've tried setting the hold switch once I do get it to sleep, but all that means is that I then have to take it out of hold again a few seconds later to turn it off when it lights itself up. I've restarted over and over, but it keeps happening. I've also recently restored it, with no results. I don't have any alarms set, and there is nothing on my iPod but music and album artwork--no calendar, etc.
It seems to do this most when I am moving around the room. I'm wondering if, somehow, it has become hyper-sensitive and is waking up because it thinks it's being touched? (That sounds so creepy.) It also wakes up instantly if I touch the USB port on the bottom. But of course it also must do this when I'm not around, because often I'll come into the room to find the battery 50% lower than it was when I left. (And I'm the only one who uses my iPod.)
As I said, this has happened before over the two years of its life, but over the past three days or so, it has become nearly constant. I haven't dropped the iPod, it hasn't gotten wet, I haven't done anything unusual with it, so I am at a loss to explain the sudden recurrence of the issue.
I'd appreciate any kind of help!

Try resetting the iPod Nano - iPod Nano 5th Gen. User Manual

Similar Messages

  • My ipod nano has stopped shuffling and won't re-sync

    My ipod nano has stopped shuffling and won't sync to begin shuffle again

    http://www.apple.com/support/ipod/service/prices/ look up your model and country and if your willing to pay that much im not sure how you go about getting it done,
    Hope this helps,
    Quin.

  • How do I stop my iPod from turning itself on and off??

    My button on my IPod has been broken for a while now but that's fine. But just recently my iPod started turning itself on and off as if I'm pressing the lock button. This problem is VERY annoying. If anyone knows how to fix this PLEASE help.

    Do you have a case on it that covers the power button?
    If not, the power button stuck down.

  • IPod Nano Turns itself on

    Hey guys. Recently, I spilled water on my desk with my iPod on it. It has a cover on it, but it doesn't cover the connectors. I dried it off and it works perfectly. Then, I was noticing that I would leave it somewhere, and it's battery would be dead when I picked it up. I then started watching it and noticed that, even with the hold on, it turns itself on and displays the backlight.
    I know that it isn't an Alarm. I know that can cause problems, but I checked and I have no alarms on. Anything else that could be causing this? Thank you.

    have u tried connecting it to comp?
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Ipod keeps turning itself on and off repeatedly until battery goes dead

    please help.....my ipod just keeps turning itself on and off repeatedly until the battery goes dead. The only thing that will show up on the screen is the apple logo and then it will power cycle over and over and over! I have tried reseting it but I am limited to what I can do because the computer will not recognize the ipod when i connest it to my computer.

    Take it to your local Apple Store

  • When I boot up my Mac, Messages opens automatically. I quit the app, but it just re-opens itself. It won't stay off!!! I can't figure out what's wrong with it!

    For the past few months, my Mac has been acting weird. EVERY time I boot up the computer, Messages opens automaticallly (I am runing OS X 10.8.x). I quit the app, but it just re-opens a few seconds later! It just won't stay off! I've looked it up online and nothing helps. I have no idea what to do!!!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Ipod nano 7th keeps flashing and won't turn on

    my ipod nan 7th generation is flashing on the blue screen and I can not turn it on...

    Hi peggic,
    It sounds like your iPod Nano isn't functioning properly. I have located an article which you may find helpful. It contains a series of troubleshooting steps you may want to consider:
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Thank you for contributing to Apple Support Communities.
    Take care,
    BobbyD

  • 6th gen ipod nano has white screen and won't go into disc mode

    My ipod nano has a white screen - it will play music, and it is recognized by itunes. It won't enter disc mode. I can't seem to find any other helpful steps to follow online other than put it into disc mode and restore it via itunes. When I attempt to put it into disc mode holding power/Vol down together the screen will turn back, but when I then hold down Vol down/Vol up together while the screen is dark it just goes back to white screen. I did plug it into the computer and restore it via itunes, and the screen is still white.  Any ideas?  Thanks!

    Hi LizS5,
    It sounds as if you have already done much of the troubleshooting suggested in this article, but I would suggest you work through it in order to get your iPod nano back up and running -
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Specifically -
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    And if the issue is not resolved -
    My issue is still not resolved. What do I do next?
    For information on servicing your iPod, go to the iPod Service FAQ
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • IPod keeps turning itself on and off but wont start

    My iPod has been turning itself on, but before it's past the screen with the apple it turns itself back off and it will repeat doing that until the battery runs low then it will sit on the battery screen for a few minutes. After it gets some juice it starts back up with this crap. I figured it wasnt the battery because it was almostly completly fully charged when it started happening. It was when I was charging it, and when I was done I removed it from the computer properly; pushed the button to start it up and its been doing this disturbing ritual since. Ive tried every thats been suggested on this site, and I'd love to restore it, but iTunes doesnt reconize it. I've been trying to fix it for hours working with both the iPod and Windows but nothing seems to have any affect on it. I am afraid I'm going to have to replace the entire thing.
    If anybody knows anything that might help, please, I'll take any form of it ya got.

    I posted something earlier this week and i realized we have the exact same problem!!!! Sorry, but the bad news is that restore won't work!!! I put it on disk mode so the computer finally recognized it. It also charges on disk mode. I charged it for over an hour. But after i tried restore, it went back its old routine! Now I'm starting to charge it on normal mode for four hours, just in case. Have you tried the 'drain it for 24 hours' thing? I've seen it on several websites, but haven't tried it yet. SOMEONE HELP US!!!!!

  • Ipod nano randomly turns on, pauses music & won't stay off

    I got an iPod Nano 6th(?) Gen in August. It didn't get used for another month - loaded it with tunes in September. After about a month of intermittent use, it started to randomly pause music without touching it in any way. I also noticed that, even though the iPod wasn't being used daily, it rarely had enough charge to play for more than an hour. After paying close attention one day after turning it off, it just jumped back on without my touching it.  Disturbing to say the least - brand new gift, hardly used and not working right after only a couple months.
    It was suggested by online and telephone support that the iPod be reset by holding down the keys; then reset, wiped clean and reloaded in iTunes (phone support).  Neither of these fixes worked.  Very upsetting.
    In November I filled out a service request and sent my Nano back via UPS.  I am beyond livid at this point as #1 - their tracking page tells you nothing #2 - I almost didn't get my iPod back as they never notified me it was shipped via FedEx requiring someone to be home to sign for it(!) and #3 - my device was denied repair/replacement because they're saying that the LCI (liquid contact indicator) was pink, indicating that my iPod had been submerged in liquid causing the internal damage.  I was told that I had to bring it to an authorized Apple place and they could replace it for me for $65 which is about half of what my husband paid for the thing.
    Um, unless this spill or submersion happened right before they sealed it in the box it never got wet.  I think this touch-Nano is defective from the posts seen here and Apple is looking for a way to not replace/repair at their cost.  Maybe their LCI is hypersensitive?? I might have breathed on it or maybe it couldn't take the humidity in August when it was given to me... If a device is to be sold for use by the average, active person (it has a pedometer for Criminy's sake) maybe it shoudn't be so sensitive to "wetness". 

    Call Apple Customer Relations-1800-767-2775.  Explain to them exactly what you stated in your post. 
     Good luck! 

  • Ipod Nano turns automatically on and off

    Hi there,
    I have the following problem.
    My Ipod Nano 4GB turns always on and off. The result is, that my windows pc can't recognise it.
    I have tried everything to restore the ipod, but this doesn't work as well. As soon as I push the Menu the Select Button after the Hold function nothing happens. The Ipod turns off for a short time and on again. Its always the same game...any ideas how to resolve this issue?
    Thanks Beat
    Dell Inspiron   Windows XP  

    Hello Mo0nangel,
    Welcome to Apple Discussions.
    First, try updating the iPod software. Follow the steps in this article:
    Updating iPod software
    If the problem persists, you may have to restore your iPod:
    Restoring iPod to factory settings
    Unfortunately, restoring will wipe your nano clean of all songs and photos.
    Gary

  • HT1339 HELP my ipod nano has completed frozen and won't do anything

    my ipod has complete frozen won't turn on or off and won't work charging by the mains or via the computer, i wanted to do a master reset but i can't even do this, please can anyone help

    Have you tried a hard reset yet?
    How to reset iPod
    B-rock

  • Help -- iPod Nano loses charge quickly and won't start up

    When I don't use the iPod for a few days and then try to start it up, it won't turn on at all. The only way I can get it to work is to connect it to the computer. It also seems to lose its charge quickly. I sent it back to have it checked out and I was told it worked fine, but I continue to have the same problems. I'm stuck. Any suggestions? Would Restore help?

    A restore may help.
    How are you trying to turn it on though?
    See this as well...
    About Sleep, Deep Sleep, Hibernation, and Sleep Timer
    Finally, does resetting it turn it on?
    Resetting iPod
    For the battery issues...
    Tips And Tricks For iPod Battery
    iPod Battery Unplugged
    Caring For iPod Battery
    About the iPod Battery
    And use this to test how long the battery actually lasts...
    How To Determine Your iPods Battery Life
    btabz

  • IPod keeps turning itself on and off after attempted update

    I attempted to update my iPod touch 4 from iOS 5.0.1 to iOS 5.1 but now my iPod keeps shutting itself off and turning itself on.

    - Try a reset:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then try to restore the iPod.
    - If you could not restore and it is still turning on and of and on and off...let the battery fully drain. After charging for an hour try the reset and restore again.

  • Ipod Nano Error 1417 Tried and won;t work

    I've tried looking through the restart method, the disconnect and reconnect method, and nothing works. My Ipod Nano is Ver. 1.0, and the update process does not pop up with a dialogue box, all it does is 'updating' but it's really doing nothing, help?

    are you still at an itunes version 7.0.0.70, Chang?
    to check, go "help > about itunes" and wait for the version number to scroll up from the bottom of the screen.
    if you've still got a 7.0.0.70, first try an upgrade to 7.0.1.8:
    iTunes 7.0.1.8 Installer
    if you still get the 1417 when using 7.0.1.8, let's get your iPod Updater logs to the Apple engineers for a look.
    Open this folder:
    C:\Documents and Setings\yourusername\Application Data\Apple Computer\iTunes\iPod Updater Logs
    (You may need to show hidden files in order to see the Application Data folder. Open up My Computer, and in the Tools menu, choose "Folder Options..." Then go to the View tab, and then in the "Advanced settings", select "Show hidden files and folders.")
    Send the files inside the iPod Updater logs folder as attachments to this email address.
    In the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

Maybe you are looking for

  • SQL Query to get statistics report

    Hi Experts, I need to get a report for CPU utilization,Memory Usage,Event Waits, Connection Spool and Shared Spool for a given query. Need some tips from you to get that report. Thanks,

  • Pismo freezing up

    2 days ago my pismo froze up, unresponsive and the cursor wouldn't move. i turned it off but i could still hear the hard drive on. removed the battery and power, put them back in and it didn't start the first couple of times but then did. it had been

  • Splitting pdf doc. of  amauntaneos number of pages into smaller one document

    I am mew to adobe pro and I would like to get to know how do I split a pdf doc of 254 pages into smaller documents , foe example of 10 pages to be able to send it by mail. It is coherent pages- those of 254 pages. Thank You.

  • Existing "Publisher" application

    Is there a simple "microsoft publisher" made in flash. I need to allow clients to produca a very simple graphic via a web interface: Upload some images: Add some borders: Add text boxes & change font etc. Save the finished image as a jpg. Any help ap

  • Urgent: OPEN_FORM  in JDEV

    In Developer when I want to run a fmx, I write: Open_Form(:PARAMETER.PATH||'namefile.fmx', ACTIVATE, NO_SESSION/SESSION, pl_id); where NO_SESSION            (The default.) Specifies that the opened form should share the same database session as the c