Ipod nano turns of after short amount of time

My Ipod nano 6th G turns off after about 30 seconds. I was wondering if anyone knew how to fix it.

Make sure the headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano.  No silver from the headphone's plug should still be seen.
B-rock

Similar Messages

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • Ipod nano turned off after playing for 5 mins even fully charged

    anyone, please help me. i bought this new ipod nano3rd gen. last nov2007. after charging it (full charge) after 5 mins of using it it suddenly shuts off... and this happens a few more times. i brought to the store where i bought the unit...they restore it to factory setting...but when i got home..the same thing happens. i filed a complaint at our DTI(dept. of trade and industry) so the store and i had an agreement to have it sent to an authorized service center in manila...after 2-3weeks they sent me a letter informing me that there were no defects found...it is said that it was set in automatic shut off... is there such a setting in ipod??? up until now i have not enjoyed my ipod...pleease..help me...

    even if it was restored to factory setting? it will continue on it's sleep mode? i was wondering...how come the person did not see this the first time i brought the item to them...and worst...while he was observing the unit(my ipod was fully charged then) the unit again turned off and he immediately plugged the ipod to the computer...
    btw, pls help me how to go to the sleep timer setting...so i could chek for myself too
    thanks for the reply

  • My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?

    My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?

    Did you see my post above?
    Have you tried a different set up earbuds to see if that helps?
    What about resetting the Shuffle?
    Resetting iPod shuffle
    B-rock

  • I'm just wondering.. Will there be a 32GB iPod nano in the after years? That'd be awesome if they will do make it... ;D

    I'm just wondering.. Will there be a 32GB iPod nano in the after years? That'd be awesome if they will do make it... ;D

    http://www.apple.com/feedback/ipodnano.html

  • My iPod nano 6 stops after 2 minutes playtime

    My iPod nano 6 stops after 2 minutes playtime

    Contact Apple Support or visit Genius Bar to have your ipod checked.

  • Why does my ipod nano turn off and on?

    why does my ipod nano turn on and off?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Did you try everything above, including trying on another computer? If so then
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Why does my ipod randomly turn off after 5-10 minutes of use?

    Why does my ipod randomly turn off after 5-10 minutes of use?  Is the battery defective?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • My ipod nano pauses by itself 3 to 4 times per song..how can i fix it?

    My ipod nano pauses by itself 3 to 4 time per song... i need help and information on getting it fix...please help

    Make sure the headphones are plugged all the way in. The white part of the headset should be flush with the body of the Nano and no silver from the plug should still be seen. 
    B-rock

  • After short period of time my messages are disappearing from my Icloud mail account.Why does it happen?Can I restore them back?

    I can't understand my Icloud mail behavior.All messages I sent are stored in sent box as usual whereas messages I receive are disappearing after short period of time (no more then 2 weeks).Why does it happen?Do I have any chance to restore them?

    Unfotunately I'm not eligable for MAC support over the phone and have to take it in to the Genius Bar. Hmmmpf.
    But I was able to isolate the errors (using Console) that occurred just prior to the network failing:
    8/30/09 10:53:05 AM Dock[231] _DESCRegisterDockExtraClient failed 268435459
    8/30/09 10:53:25 AM SystemUIServer[232] * CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x9307, name = 'com.apple.tsm.uiserver'
    See /usr/include/servers/bootstrap_defs.h for the error codes.
    8/30/09 10:53:25 AM com.apple.launchd[196] ([0x0-0xc00c].com.apple.systemuiserver[232]) Check-in of Mach service failed. PID 232 is not privileged: com.apple.tsm.uiserver
    8/30/09 10:53:33 AM GrowlHelperApp[249] WARNING: could not register Growl server.
    8/30/09 10:53:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[259]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
    8/30/09 10:54:36 AM [0x0-0x1a01a].com.apple.Safari[261] Debugger() was called!
    8/30/09 11:00:50 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[279]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
    8/30/09 11:05:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[290]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
    Any idea what these mean?

  • Ipod Nano turns automatically on and off

    Hi there,
    I have the following problem.
    My Ipod Nano 4GB turns always on and off. The result is, that my windows pc can't recognise it.
    I have tried everything to restore the ipod, but this doesn't work as well. As soon as I push the Menu the Select Button after the Hold function nothing happens. The Ipod turns off for a short time and on again. Its always the same game...any ideas how to resolve this issue?
    Thanks Beat
    Dell Inspiron   Windows XP  

    Hello Mo0nangel,
    Welcome to Apple Discussions.
    First, try updating the iPod software. Follow the steps in this article:
    Updating iPod software
    If the problem persists, you may have to restore your iPod:
    Restoring iPod to factory settings
    Unfortunately, restoring will wipe your nano clean of all songs and photos.
    Gary

  • My iPod Nano is ,,dead" after formatting it

    Hi. I've got a big problem
    I bought an iPod Nano 2GB yesterday and i had problems with updating it, so I've formatted it (not restored- formatted using the right click in My Computer and ,,Format") And still the software didn't want to install... So I've restarted computer and unplugged iPod.
    And now, it doesn's want to turn on (I think, that battery's full, beacuse I've charged it about an hour earlier). Maybe it's the fault of format? I've plugged an iPold and nothing happens... it's dead... ;(

    Hello,
    Have you seen this article?
    iPod won't turn on
    Does your iPod respond if you try to reset it? (hold the "menu" and "select" (center) buttons together for 7 seonds until the Apple logo appears on screen).
    After you try resetting it, does your iPod display anything when you connect it to your computer, or not?
    Deos your iPod correctly go into disk mode if you try?
    How to put your iPod into disk mode
    Have you tried a restore on your iPod? Or do you get any error messages when trying to acess the iPod Updater? See this link for details about this...
    Restoring your iPod to factory settings
    -Kylene

  • IPod Nano turn off issue!

    after pressing the play/pause button for seconds to turn off the iPod nano, i swich the hold button to "Hold" position. is the iPod now on or off?
    i am asking this question all because i found my battery charge lost a lot when i turn it on again.

    FYI:
    iPod: About Sleep, Deep Sleep, Hibernation, and Sleep Timer
    Regards
    Colin R.

  • Why does my ipod nano shut off after taken out of charger

    Whenever I take out my iPod Nano Generation 6, out of the charger cord, it works until I press the power button, and stays in sleep mode. Even after holding the power button, it won't turn back on.

    This used to happen once in a while with my ipod classic.  You need to "reset" the ipod.  For the 6th Gen. Nano, try holding down the sleep/wake button and the volume down button simultaneously, for about 8-10 seconds, or until the apple logo appears.  You can also see the info here: support.apple.com/kb/HT1320

  • IPod Nano turns itself on, and won't stay off

    Hi, everybody!
    I've had my iPod Nano for about two years now, and have noticed this problem occasionally, but it usually goes away and it has never been this bad.
    Here is one scenario: I turn my iPod off by holding the play button. The screen fades to black. I move to set my iPod down, and it immediately lights up again. I press and hold the play button, but instead of turning off, the iPod begins to play music. I pause the song and press and hold again. The iPod fades to black, but again lights up the minute I move my hand.
    Here is another scenario: the iPod has been off for several hours. Suddenly, it lights itself up. I pick it up and turn it off, but it again continues to light up as it sits on the desk.
    This, of course, runs down the battery--I've had to charge my iPod every day for the past few days because it kills itself, waking up over and over when I'm not around to turn it off again. I'm used to only needing to charge it every few days.
    I've tried setting the hold switch once I do get it to sleep, but all that means is that I then have to take it out of hold again a few seconds later to turn it off when it lights itself up. I've restarted over and over, but it keeps happening. I've also recently restored it, with no results. I don't have any alarms set, and there is nothing on my iPod but music and album artwork--no calendar, etc.
    It seems to do this most when I am moving around the room. I'm wondering if, somehow, it has become hyper-sensitive and is waking up because it thinks it's being touched? (That sounds so creepy.) It also wakes up instantly if I touch the USB port on the bottom. But of course it also must do this when I'm not around, because often I'll come into the room to find the battery 50% lower than it was when I left. (And I'm the only one who uses my iPod.)
    As I said, this has happened before over the two years of its life, but over the past three days or so, it has become nearly constant. I haven't dropped the iPod, it hasn't gotten wet, I haven't done anything unusual with it, so I am at a loss to explain the sudden recurrence of the issue.
    I'd appreciate any kind of help!

    Try resetting the iPod Nano - iPod Nano 5th Gen. User Manual

Maybe you are looking for

  • Pricing routine in copy control from quotation to contract

    Hi Team, I have a requirement where price from a particular condition type of a quotation needs to be copied to another condition type in contract when a contract is created in VA41 with reference to a quote. I am unable to find a routine for this. C

  • Error in data transfer using CIF

    Hi all, I am just clueless. I am trying to transfer master data from ERP to EWM but it ain't happening. It is throwing out this error. System:    P6QCLNT800    User:  RFC_USER_1 12/11/2010 Function/Q/SAPAPO/CIF_LOC_INBOUND Text:        Internal error

  • Forest / Domain Trust across firewall

    Good evening, we have the following situation: Forest-A (Domain-A): centralized application for mail archiving, IP range 172.18.20.xxx Forest-C1 (Domain-C1): Customer 1, IP Range 192.168.1.xxx, PDC 192.168.1.1 Forest-C2 (Domain-C2): Customer 2, IP Ra

  • Canvas drawing combined arc s bug?

    Hello, I'm working on a HTML5 canvas game, where some areas should be drawn connceted in some kind of "blob" of circles. The code im using to draw looks like this, and an example can be found on github: https://github.com/jrie/Connect The error is vi

  • How to downgrade the Virtualization Software Version for a particular host

    Good morning all: I'm trying to downgrade the Virtualization Software Version of one 2012 R2 host to match the others. One host is at 6.3.9600.16404. This is the correct running version of the cluster. The incorrect version on one host is 6.3.9600.17