IPod (nano) volume

why can't iPods be louder? the first 50% is useless on the volume control? and many times the max is not enough. for me.

All iPods manufactured for the European market have a volume cap applied to them. It's a European directive from those nice people in Brussels who make sure we can't damage our delicate little ears.
If you have an older iPod you can use goPod to remove the cap on iPods that have this volume limitation.
However this application will not work on late model iPods such as the second gen nano or the late 2006 model 5th gen iPod.

Similar Messages

  • My 6th generation ipod nano volume adjusts itself and turns down volume without me touching it.  This is the second ipod on which this has happened. I can't be the only one with this problem. Help!

    My ipod nano 6th generation has started changing the volume while music is playing. It doesn't matter whether I am running or sitting.  It will turn volume down to zero in the middle of a song.  This happened on my last ipod a few months ago and I returned it and got a new one.  This is my second grey one.  I don't want to have to return it again, but I might.

    Take your iPod Nano back to the Apple Store.  Let them see what you are seeing.  Only this time............
    Prior to leaving the Apple Store:    ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.***

  • Ipod Nano volume jumps

    The volume line keeps moving to silent so that nothing can be heard for more than a few seconds.

    Hi TENTLADY,
    I understand that you are experiencing some issues with your volume on your iPod nano. Here is an article that will walk you through some troubleshooting steps regarding this issue:
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    https://support.apple.com/en-us/HT203681
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Ipod nano volume want work.

    I have a ipod nano 6th generation, the down volume doesn't work. the sound goes up until it gets to it max.

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • IPod Nano - volume not working

    My 3rd generation Ipod Nano's volume stopped working after a software update. I have tried the 5 Rs: Reset, Retry, Restart, Reinstall, Restore
    1. I checked the head-phones
    2. I tried resetting my iPod.
    3. I removed and reinstalled itunes to my computer.
    4. I finally restored my Ipod Nano to it's original settings and the volume still does not work.
    Thank you in advance for your assistance.

    Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.

  • 6th Generation ipod nano volume problem!

    When I'm listening to music on my 6th generation ipod nano the volume gets super loud without my doing anything!! Can anyone help me with this????

    Take your iPod Nano back to the Apple Store.  Let them see what you are seeing.  Only this time............
    Prior to leaving the Apple Store:    ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.***

  • Ipod Nano Volume level

    Hi, I have got an Ipod Nano 2nd Generation and use earphone that sit on your ears not in ears as I find them uncomfortable. The only problem with this is that I find that the volume is not very loud, I have it on the maximum, I know there is a volume limit set on all mp3 players but does anyone know if there is any way of making it louder?

    At this point, the software people with iPods purchased in EU countries were using to remove the cap do not work on the 2nd gen nano. No word on when it will. So other than maxing your volume limiter and trying more expensive earphones there really isn't anything you can do right now.

  • Ipod nano volume control

    I have an ipod nano, and I was messing with my ipod in my pocket and somehow locked my volume control so it will only go up so loud. I've tried going under "Volume lock" in the "Settings" area, but its asking for a combination and I don't know what it is, any suggestions how to take the lock off or find out what my combination is? Thanks! You can also email me with an answer, [email protected]

    http://docs.info.apple.com/article.html?artnum=303414
    KoDor

  • My ipod nano volume limit?!

    Well, my ipod nano second generation has very low volume. Even set to full under settings and normal, its not even as loud as my old mp3 player.
    But my mates ipod is very loud when he turns it up, is there a reason why mine dosn't play sounds loud?
    Its english;
    I checked the headphones on his and there is no problem with those.

    My iPod nano was bought from US and it was loud enough when needed but after the latest software update, the volume levels went down. So, I guess I got the EU package and that explains the change.

  • Ipod nano volume limit locked

    Hi
    I think the kids have set a combination code on the volume limit of my iPod Nano. Can I get it off and how? If I have to do some kind of reset can I re-sync my playlists from my iTunes library? Have over 1000 songs on and would hate to have to import/purchase again.
    All help gratefully received.
    Thanx.

    Restore your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • 6th gen iPod Nano volume keeps going down on its own

    It's been getting worse lately. It started happening towards the end of each of my run, but now even when I leave it on my desk, I can see the volume just move down on its own to zero. It is very unreliable and during long runs, I have to keep battling with the volume (it goes down on its own, and I have to bring it back up again). Shutting the iPod Nano off and turning it back on doesnt help.
    Anyone else encounters this? What should I do? My iPod Nano is about 1 year old.

    This issue is usually the result of the Nano coming into contact with moisture (likely from your workouts).  Try putting the iPod into an uncooked bag of dried rice and leaving it sit for a few days.  This should absorb any moisture in the iPod.
    After the few days are up, give it another whirl.  If the problem persists, connect the Nano to iTunes and restore it to factory settings.
    Otherwise, the damage may be permanent, meaning you'll need to have your iPod serviced or replaced.
    B-rock

  • 6G iPod Nano Volume Spike Issue

    I tried checking the thread on this matter but could not find any discussion on it.  I noticed that there is a sudden spike in volume particularly when switching from one song to another.  This can happen when double clicking any iPod compatible earphone (or even Apple's own) controls.  It does not always occur with every track but occurs often enough about 30% of the time.  Is anyone encountering any of this issue.  I did not encounter this problem with my last gen iPod using the very same playlist.  Thanks all in advance.

    Are all of the tracks on your Nano encoded in the same format?  Are there any EQ settings enabled?
    Ideally, it would be nice to sync these tracks to another 7G Nano to determine if it's an issue with your particular Nano or not.
    B-rock

  • Ipod Nano volume question

    Hi,
    I use my nano as a music source on my motorcycle connected to an Autocom intercom. I have found it to be the best think yet for non skip music.
    As I normally wear ear plugs I have always had a problem getting enough volume from other sources. However, with the nano I realise that you can import from itunes with a volume level adjustable up to +100%. I have found that at this import level I only need the volume turned up to about 80% on the nano when on the bike. However, even with AAC tracks I can hear some minor sound distortion.
    My question is would I benefit copying from itunes to the nano at, say +75%, and then have to use more volume on the nano or remain with +100% and use less volume on the nano?
    Or another way of asking is will I get better quality from increasing the volume from an import from itunes at a lower volume or increasing the volume on the nano to max?
    Hope that makes sense!
    Thanks,
    Mark

    I encountered this problem about a week into using it. I restored my iPod to fix the problem.
    Everything was fine for me for about a week, but then at the start of one run, the Nike+ voice tried to say two sentences to me at the same time. I think it was the "Walk around to activate your sensor..." and whatever instruction happens next at the same time. From this point on, all of my songs and Podcasts were less than half the original volume, but the Nike+ voice was full volume. This basically ruined the rest of my workout.
    I suggest trying to reset your iPod to see if this fixes the problem, and if not, then do a restore to your iPod.
    The only bad thing about doing a restore is then your iPod loses all of its workout history, so from that point on your history is only on the Nike+ web site. Too bad iTunes doesn't transfer the workout history back to the iPod...
    Good luck,
    Brian
    Black MacBook   Mac OS X (10.4.7)  

  • ********Forgot ipod nano volume code********

    I forgot the code to the volume control. I have done everything suggested to unlock, I've even reset my ipod to the factory setting and still can't unlock the code. I'd figure this would be the best for me to get help at this pont. Any suggestions??

    this is what i would do:
    enable the disk mode, backup all musics on your ipod, close the iTune, then use either disk utility or the format command on windows to fast format the ipod, whatever format will do, itune will later restore it to te right format.

  • IPOD NANO VOLUME LIMIT

    HELP...I got a 3rd Gen Nano for Christmas...I NEVER put a combo number into the volume limit...and now it won't let me turn the volume up...it says wrong combo..but I never put one in so of course I don't know what it is. Does anyone know how to RESET the control??? I've tried doing the reset..but it doesn't clear the volume limit.

    Thanks, I will try that....someone else told me I have to bring it in to the Apple Store....which I may have to do anyway....has anyone heard of the battery recall??? I saw it on the news...apparently the lithium batteries could cause a fire.

Maybe you are looking for

  • How to transfer all songs from iPod to iTunes?

    Well guys, To make a long story short, I'm helping out a friend who just converted from a PC notebook to a Mac Pro. A sweet choice, I know... But he thought that he had backed up all of his music on an external but erased it thinking he had backed up

  • Not able to use Client Object Model in Visual Webpart SandBox Solution?

    Hi, I am trying to use client object model in visual webpart in sandbox solution but i am getting unexpected error but if i remove client object model code webpart works fine? any help is appreciated. Regards, Gaurav Verma

  • Calling a java object from a store procedure

    I have written a translation object in java that takes a $en_var in and returns its path. What I need to do is call that object from a PL/SQL store procedure. All the examples I have seen treat the store procedure as a wrapper around the java object.

  • Finder Freeze while copying files

    Hi, Recently my Finder freezes whenever I transfer big files (more than 1 gig) to my server through network. The Finder would freeze for 10 to 20 seconds and the copying bar freezes too. After 10 to 20 seconds, the copying bar continue to copy the re

  • Can AppleTV allow me to open a safari screen on my TV

    Does AppleTV operate like a mac mini attached to my TV allowing me to essentially use my TV screen as a computer monitor?