Ipod Nano - when turned on screen is cracked-

Whenever i turn my nano on which i have had for six months and taken very good care of it---it appears to have cracks on the screen and black is coming from them. What is the problem ? Any suggestions would be helpful.

How did it crack? If it was accidental (like you did it from dropping it, etc.) then apple won't replace it. If you didn't do anything, it could be defective and if it is apple will replace it free of charge.
Suprisingly enough, though, what you may think of as not accidental make actually be accidental. The iPod nanos are way to fragile to be released on the market without a huge "PATHETICALLY FRAGILE BUY A CASE WITH IT" sign on the box, but that's just my opinion. Seriously, empty pockets=death for the bare iPod nano, even if you don't sit down.
Send your iPod to apple and see what happens. Either they say it's abuse and send it back to you, or they find no pressure points and give you a new one. Oh, and also, it seems doing it online gives you the best results.

Similar Messages

  • Hi, my ipod nano when turn off miss batt charg , plz help

       hi dear
      my ipod nano when turn off miss batt charg , plz help  me

    nastaranfromcrowley wrote:
    for example : my ipod have full charg , i turn off my ipod , after 3 days my ipod doesnt turn on , and show batt doesnt charg while i dont use it
    The iPod Nano battery will not charge unless you connect it to your computer, to an AC outlet with a wall adapter, a charging dock or an auto adapter/dock.
    You battery is always discharging when idle or shut off.  You should read the manual for your model iPod Nano regarding batteries - iPod Manuals
    iPod Models

  • My ipod nano (6th gen)'s screen don't turned on... when resetting it, the screen turns to white.. the most worst is, it doesn't work out...

    I really don't know to fix it... What happen was, when i played my ipod nano, it turns to white... i don't know if I accidentally clicked anything on the screen or the buttons at the side of the device... What i did was, I connected it in my laptap because I was thinking that maybe my ipod was in hang mode. When I was able to connect it, the itunes recognized it but I can't played the music and the screen in my ipod screen was still white... SO, I restored it in factory setting... the same thing happen... i don't know what happen, so I need your help...

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • 6th generation iPod nano automatically turns off when I push het sleep/wake button or when screen turns black after a while. How can I solve this ?

    My 6th generation iPod nano automatically turns off (=stops the music) when I push het sleep/wake button or when screen turns black for power saving mode. Does anyone know how to solve this ?
    I have already tried resetting, connecting to PC/iTunes to check the software version, turning off/on, I don't have any inspiration anymore.
    Thanks for your suggestions!

    Hi VeerleD,
    If your iPod touch unexpectedly powers off, you may want to use the steps in this article to troubleshoot -
    iPhone: Hardware troubleshooting (The steps apply for the iPod touch) -
    Specifically -
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My ipod nano will turn on and play but the viewing screen goes out and I cannot access the information to select different playing options. Any suggestions?

    My ipod nano will turn on and play but the viewing screen will not come on and I cannot access the information to select different playing options. It glows white background light then goes dark for the entire time I am using it. Any suggestions?

    I had the same problem.  Someone here told me to make sure my earbuds were in securely.  Push until they click in place.  It solved the problem.  The music still plays even though the screen goes to sleep.  Hope this helps.

  • How can I prevent my iPod nano from turning on by itself and running down the battery?

    I will arrive at my desk in the morning, stop the podcast I'm listening to, notice by the "play" button appearing on the screen and that absence of audio in my ears that the podcast has actually stopped, hold the big oval button down until the screen goes dark, and set my iPod down on the desk. Every now and again (maybe twice a week) I'll catch the iPod playing. It's usually off playing music (i.e. it's somehow navigated away from the podcast I've been listenting to and ended up in a music shuffle somewhere), and it will continue playing until the battery runs down or until I happen to notice it and turn it off. Doesn't only happen at work, happens anywhere...home, car. Result is that once or twice a week I go to use the iPod and the battery has completely run down.
    How can I prevent my iPod nano from turning on by itself?

    Unplug the headphones.

  • Ipod nano keeps turning on and off

    My ipod nano keeps turning off and on automatically and when I push a button once its on then it freezes, and when I reset it then it starts turning on and off again....what do I do someone please help me

    Hello Mo0nangel,
    Welcome to Apple Discussions.
    First, try updating the iPod software. Follow the steps in this article:
    Updating iPod software
    If the problem persists, you may have to restore your iPod:
    Restoring iPod to factory settings
    Unfortunately, restoring will wipe your nano clean of all songs and photos.
    Gary

  • TS1363 how to unlock my ipod nano when i have forget code

    how to unlock my ipod nano when i have forgot code

    If you do not know the combination, you can try and connect it to the iTunes library you normally sync it.  Upon properly ejecting it from iTunes and your PC, you may find that it is now unlocked. If it is, disable the screen lock or change the combination immediately.
    Otherwise, your only other option is to connect it to iTunes and restore it to factory settings.
    B-rock

  • Ipod nano doesnt turn on

    please help me my ipod nano doesnt turn on or sharge. when i try to update it it doesnt turn on or do anything please help me

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.

  • TS1412 any ideas about how to fix an iPod Nano with a white screen??

    any ideas about how to fix an iPod Nano with a white screen??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Does iPod nano automatically turns off if not used in 2 minutes?

    Does iPod nano automatically turns off if not used in 2 minutes?
    this is the questions tha runs my mind bcoz I just bought it about 2 weeks ago and just this recently I noticed that it automatically switches off after 2 minutes if remained untouched even if i did not set the sleep mode. Well, it normally functions coz during playing a song it does not sleeps but by the time pausing the song and after two minutes the nano switches off, but if you press any key it goes back again and you can play the paused song again. is this thing normal? i am really bothered by this. please help me THANKS A LOT

    I recently bought a 2nd Generation 8Gb iPod Nano and can state for a fact that if you pause a song for exactly two minutes the device will turn off, probably to save batttery power. I tested it three times already and clocked it.
    However, I also noticed that my iPod also seems to turn off by itself (even when sleep / timer is not selected) when I'm shuffling through songs using the forward/next and/or rewind/back buttons repeatedly.
    Is this normal, or just a bad coincidence?
    I've tried the 5 Rs but the problem persists. It really annoys me because I have the habit of skipping lots of songs.

  • Itunes will not recognize my ipod nano when it is plugged into the computed

    itunes will not recognize my ipod nano when it is plugged into the computed

    Check this post: https://discussions.apple.com/message/6985613#6985613

  • Please help. ive bought a second hand ipod nano, when i connect it to my  pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

    please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

    there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
    so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

  • Old ipod nano - when i connect it to my imac - error message

    I have an old iPod Nano - when i connect it to my iMac, I get an error message that says I can't have more than 5 computers authorized with my account - My account only shows 4, but that's really beside the point since this iMac is already authorized and I sync other devices from it.  Any suggestions? It won't let me add any new content to this iPod.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

Maybe you are looking for

  • How can I move an itunes movie to my wife's ipad?

    Hi - I bought some videos from the iTunes store.  Now I want to put them on my wife's ipad so we can watch them while traveling.  If I try to simply plug the ipad into my mbp the sync wants to erase her entire itunes content so it doesn't look like a

  • How Do I put the music in my iTunes library onto my iPhone music library

    Just bought a new iphone. I want to put music on it. My iTunes library is full of music, how do i move it to my phone?

  • How to use a database per customer

    Hello, I currently design an Application that shall be used by multiple customers. Every customer shall have a database by its own for security and performance reasons. What is the best way to do this: - Create a database schema per customer (no prob

  • 20 State Limitation... best practice for FC 5.5

    After reading past posts, I'm aware of the 20 State limitation within the app. Having said that, is there such a thing as "best practice" to increase the number of States? Using Flash Pro is not an option. Thank you and much appreciated.

  • Display of Satellite A200 does not switch on after 15 min inactivity!

    Hello! I have just purchased a Satellite A200 1-AX PSA6 and install Windows XP SP2 + upgrade bios for winxp. After 15 munutes of unactivirty (not pressing any keys or mouse move) I'm set in Power options in control panel - what Display must power OFF