Ipod nano with car kit

I have just fitted an Alpine car kit to play my nano in the car, but although the track info is coming through on the head set, i get no sound!
We've tried another nano and it works fine.
any ideas?

Try turning the volume up on your iPod.
You may also want to reset the iPod while it is connected to the system...
Resetting iPod
Also, this system connects to your iPod via the dock connector, right?
btabz

Similar Messages

  • Using ipod nano with car stereo?

    sorry if this is a blonde question, but I have just got a new (to me) car which has a sony gtx cd300 stero in with an ipod connection. Ive bought a new ipod nano, plug it in, nano says "OK to disconnect". stereo display does not seem to recognise. Dont suppose anyone can advise me? Nano works fine on its own. stereo works fine as cd and tuner, just cant get it to work with the ipod? arrgh! Very very grateful for any help or advice. Kind regards Lindsay

    As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

  • Using ipod nano with car

    I just received a new ipod 16gb, which has a new charger.  How can I use this in my car, which has ipod connectivity using the old plug?  How can I use it in my skullcandy speakers, which use the old plug?

    As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

  • Sync ipod nano with a new computer

    My hard drive in my MacBook crashed and I now have a new computer. I am trying to sync my ipod nano with iTunes but i get a message stating that the content on my ipod will be replaced with the songs and playlists from my iTunes library (which is nothing). I want to get all my songs, playlists, from my ipod onto my computer. Help!!!

    See if there are instructions for what you want to do in the iPod nano (5th generation) - User Guide, check Knowledge Base, iPod Nano Support or call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273).
    !http://i50.tinypic.com/izvwo1.gif!

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • I had an old iPod nano with my files saved on it and was stolen. I cannot find my old account. I bought an iTouch and made the new account that was needed for it to function. I was wondering how i could find my old account and get all the content back.

    I had an old iPod nano with my content saved on it and was stolen. As well, I can't find and access my old account that I had with it. I bought an iPod touch and made a new account so that I could use the iTouch. Anyone know how to find the old account and how to transfer data from the old one to the new account?

    This may help you find your iTune account:
    Frequently Asked Questions About Apple ID
    Without knowing your old account info there is nothing you can do.

  • Can I sync my ipod nano with my second computer/ netbook while travelling?

    Looking for some advice on how to connect my IPod nano with my second computer while travelling. That's what happened: I have my iTunes library on my computer at home and can sync my IPod nano (6 th generation, replaced onyl recently) with that library. While I was travelling and wanted to use my IPod I received an error message asking me to connect the IPod with iTunes in order to recover/restore (sorry, the message apeared in German, so I do not know the exact wording in English) . As I only had my second computer - a small netbook - with me, I downloaded iTunes and connected the iPod - only to receive the message that this Ipod would sync with another computer (sure!) and would I want to sync it with this iTunes library instead now? (Of course not, I did not dare because that library was empty!). So there I was with my computer with iTunes library at home and an iPod stuck in recovery mode and not doing a thing during my vacation. Any suggestions? If I have to take my great big workstation with me to get the iPod running again, I might just as well leave the iPod immobile at home. (;-)

    On your home computer connect your Nano, click on the name in iTunes, move right to the Summary tab then tick the box that says Manually Manage Music. You will now have to er, manually drag your music to your iPod, and manually eject it when done, but you will be able to add music from two different computers.

  • IPod Nano with 1.1.1 software update and iPod Radio Remote

    I currently have iPod Nano with 1.1.1 software update and iPod Radio Remote, but even after the update I do't get the radio option to appear in the main menu or music menu, with the option in settings turn ON. Why isn't this thing working?

    hiya!
    just doublechecking something. are you connecting the remote directly to the nano, or are you connecting it to a Dock and putting the ipod in the dock?
    love, b

  • HT1353 how can i put music in an ipod nano with no hard drive only flash drive

    i have an ipod nano with flash drive and i dont know how to put music

    Do you have iTunes installed on your computer? Does the iPod nano come up in iTunes when you connect it?

  • What do they replace a 1st generation ipod nano with now?

    What do they replace a 1st generation ipod nano with now? from the recall.

    Glad you were able to sort it out - iPod cables and USB ports can sometimes by mysterious in their variability - though in your case the symptoms suggest that a conductor may have failed inside the cable you were using.  I've found that, using a selection of cables:
    my 2G nano will occasionally be detected as being connected via USB 1.0 (even when connected to 2.0 ports)
    my 3G nano syncs fine but steadfastly refuses to charge when connected to any of the USB ports on my main computer, though using the same cable charges happily when connected to a USB AC adapter
    Such things are just sent to annoy us
    On your other question, it is possible to completely replicate your library across two or more PCs.  As long as the iTunes database (iTunes Library.itl) is duplicated as well as all your media you then have two physical copies of one logical library, with which iDevices will sync on either computer.  See turingtest2's notes on  Make a split library portable to see how to verify that your library is in a consistent structure to make replication easier, and Backup your iTunes for Windows library with SyncToy on one method for replication (typically using an external hard drive that also serves as a regular backup).  My configuration looks like this:
    where the library on my "master" system is replicated, using MS SyncToy and an external HDD, to two other systems - a secondary one at home and one in my office at work.  My iDevices will sync to any of these without the "threat" of wiping their content because iTunes detects that they've been previously synced to a different library - because of the replication method used the "unique" library identifier that iTunes uses in the sync process is actually the same on all three systems.

  • Can I charge an iPod nano with a iPad charger

    Can I charge an iPod nano with an iPad charg

    Yes, you can. Same goes for the iPhone chargers. They're all interchangeable, since they've got the same connectors.
    Have a nice day!

  • I have an iPod Nano with just the USB charger. Is it safe to plug this into a Kindle power adaptor to charge from the mains or will I need to buy the Apple one?

    I have an iPod Nano with just the USB charger. Is it safe to plug this into my Kindle power adaptor to charge from the mains or will I need to buy the Apple one?

    Hi,
    Try resetting your iPod:  http://support.apple.com/kb/HT1430. 
    If that doesn't work, try restoring it:  http://support.apple.com/kb/ht1414. 
    If all else fails, you will have to place your iPod in Recovery Mode:  http://support.apple.com/kb/HT1808. 
    Hope this helps! 
    ---likeabird---

  • Can I use the USB cable of my ipod nano with my iPhone 3G?

    Hi,
    I am a new user of Apple. I have a ipod nano and a iPhone 3G. I wonder if I can use the USB cable for the ipod nano with my iPhone 3G. Just want to make sure if it is 100% compatible. Thank you very much.

    Thank you very much!

  • Ipod nano with iphone 4 charger

    hey i was wondering  can i charge my ipod nano with my iphone 4 charger

    No problem.  Glad to have helped.
    B-rock

  • Ipod nano with windows98

    Is there any possibility to use ipod nano with window 98 ? How ?

    How I can know about this? I call to call center but they can't answer me!!!

Maybe you are looking for

  • Article Deletion in SAP Retail

    What is the process for deleting an article and then archiving the article in SAP Retail ECC6.0?  So far what I have is to: 1.  Go to MM46 and find layouts for article 2.  Go to WLWBN and Delete Assignments 3.  Go to Assortment in WSP6 and delist fro

  • Process Composer - Mapping from a unbounded node

    Hello I´m following the documentation Workflow Pattern Coverage in SAP NetWeaver BPM 7.11 (http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8026f177-f32f-2c10-b7b0-9cc31d92984d) to create a Process Composer with a "While" Loop. According to pag

  • Premiere Elements 12 (Mac) "This project appears to be damaged. It cannot be opened."

    I have read the forum posts regarding this issue and was unable to fix it.  I was working on a project this morning on my iMac (2009) with latest Maverick OS, and all up-to-date on the software,  and things were working fine, as they had been all wee

  • I can't find any way at all to download my pre-ordered album.

    Attempt 1: I went to the album page. The album and every song say "purchased", which makes me unable to press a "download" option. Attempt 2: I checked for available downloads but came up with nothing. Attempt 3: I managed my preorders from my accoun

  • Converting enumerations to lists with generics

    hello... i want to list off system properties and sort them. how can you convert enumerations to lists with generics? i tried the following in eclipse, but it fails...      Properties properties = System.getProperties( ) ;      Enumeration<?> enumera