Ipod nano won't charge more than 20% or so

my 6 mos old nano won't charge more than 20% or so - jsut started this weekend when i ran a half marathon and it ran out of juice before i could get it charged. only time it's ran out of juice.
plug it in to everything i have, and can only get 20% charge. i wear it on an armband, and it's hot - could that be it? Or is the battery just worn out?
Went through all the stuff i could find online to try...apple site and others.
i'm kind of addicted to running with my nano - please help...

*Went through all the stuff i could find online* to try...apple site and others.
Please describe _*in detail*_ all you have attempted to do in order to resolve the issue.
Have you called iPod technical support: 1-800-APL-CARE (1-800-275-2273), considered taking the iPod to an Apple Store or an AASP?

Similar Messages

  • Can you sync an ipod nano 5th gen with more than one computer

    Can you sync an Ipod nano 5th generations with more than one computer.  One is a Dell with xp operating system and the other is an Mac laptop.

    It is possible to sync your iPod with multiple computers, but syncing with different platforms is not supported by Apple.  See this article for more details on how to get this set up.
    http://support.apple.com/kb/HT1202
    B-rock

  • HT1435 my 3rd generation iPod nano won't charge

    My 3rd generation iPod nano won't charge and when i connect it, it shows up charging then the screen goes black and wont work. Can i get it replaced for a new one? or a different one? What can i do?

    Try these steps listed below.
    1. Run “c:\WINDOWS\system32\devmgmt.msc” (i.e. *Device Manager*), and leave it open for now for later use
    2. Start up iTunes
    3. Next, connect your iPod.
    4. Go to your iPod Settings and select the “Enable disk use” option from under theSummary tab.
    5. A dialog box will pop up reminding you that you’ll need to manually eject. Go ahead and hit OK
    6. Hit Apply to save changes to the iPod
    7. Quickly switch to the Device Manager window and right-click on any item within the window and select “Scan for hardware changes”
    8. Finally, switch back to iTunes, and try re-syncing your iPod to see if it helped.
    It might not also hurt to trash your iPod's Photo cache if it has one (i.e. you sync photos to the iPod).  See this article for information on where to find this folder on your Windows XP machine.
    http://support.apple.com/kb/TS1314
    B-rock

  • TA44551 My iPod nano won't charge.

    My iPod nano won't charge.  It's only 2 months old.  I've tried using two different computers (direct connect - no USB hub, Windows 7) as well as a wall plug.  Checked the nano port for dirt.  Don't have a second cord.

    Two possibilities that i can think of:
    One- Your charger isn't working try getting a new one.
    or
    Two- Your iPod needs a new battery. Take it into the apple store to have it fixed or replaced.

  • IPod Nano won't charge with USB 2.0

    I've had an iPod Nano for a few weeks now. When I first got it, I was able to charge it up over USB 2.0 with no problem. Now, the computer recognizes the iPod, and the iPod says it's charging, but it doesn't actually charge.
    I can still charge it using the firewire power adaptor from my 20gig iPod. It seems like this only started happening after I started charging via the firewire adapter. Could the firewire adapter be causing problems?

    I had to install a USB 2.0 PCI card in my G4 tower to use the nano. Shouldn't this provide enough power? I also tried hooking it up to a USB 2.0 hub with an external power supply, so that should provide enough power too, shouldn't it?

  • Ipod Nano won't charge or show in itunes

    I bought a used nano, either 1st or 2nd generation, not sure.  The usb charger that I use for iphone and ipod classic seems to work; it provides power to the nano.  But the nano will not charge (batter dead?) and it does not show in itunes.  I've gone through all the trouble-shooting steps, including putting it into disk mode, but it still will not show in itunes.  Is it just dead or is there something I can do?  I paid 50 cents at a garage sale so can't go too far wrong but it would be nice if I could get it to work.  Thanks!

    Hello there, danielsomers.
    The following Knowledge Base articles offer in-depth steps for troubleshooting the issues you are describing with your iPod:
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My Ipod nano won't charge

    Every time I go to charge my device I get a message apearing on my screen " This acessory is not supported"
    Can any one help?

    Hi CharlesBoi,
    If you are having issues charging your iPod Nano, you may find the following article helpful:
    iPod nano: Charging the battery
    http://support.apple.com/kb/HT3215
    Regards,
    - Brenden

  • 7th Gen IPod nano- battery not charging- less than 2 years old- Maple service centre says buy new IPod as not possible to change battery in India

    IPod Nano 7th Gen- battery problem- less than 2 years old

    When you connect it to the computer's USB (or to a USB power adapter) so that it has power, does it still operate properly?  If it does, you are saying that as soon as you disconnect it from power (even after it has been connected for a while), it immediately shuts off?
    Or is the iPod "dead" when you connect it to power?

  • My ipod nano won't charge on my computer

    my ipod nano will load songs from my computer, but it will not charge. it does charge on my brothers computer. why does it charge on his and not mine?

    Welcome to Apple Discussions!
    Try the steps listed here...
    iPod not recognized when connected to Windows laptop over USB
    Also, make sure you are connecting it to a powered USB port. You may want to try a USB port on the back of your computer.
    This may also help...
    iPod's Battery Doesn't Charge
    btabz

  • IPod Nano won't charge on Mac Pro

    Strange problem this. I have the following machines:
    iMac 10.5.8 (late 2006); iTunes 9.0.1
    iMac 10.6.2 (late 2009); iTunes 9.0.2
    Mac Pro 10.5.8 (2006); iTunes 9.0.2
    My Mac Pro has my itunes library on it.
    I have a 1st gen Nano and 2 2nd gen Nanos which sync and charge fine with the Mac Pro. I also have 1st gen Touch and an iPhone, both of which will sync and charge with the Mac Pro.
    Just got 2 new toys in the family: a 5th gen Nano and a 3rd gen Touch. Neither will sync or charge with the Mac Pro. However both will sync and charge fine with either of the iMacs.
    I have tried all 5 USB ports on the Mac Pro, they are all USB 2.0 so should be ok, and I have tried 3 different sync cables. The best I managed was once the 5th gen nano started charging, connected then 10 secs later disconnected again.
    Does anyone know if the latest ipods work with the 2006 Mac Pro? If so, any ideas what could cause this?

    An update....it looks as though none of my iPods work will sync with the Mac Pro anymore, which changes the nature of the problem completely. I did a sync to my 1st gen Nano yesterday so I know it was working then. Since yesterday the only change I can think of is trying to sync the new iPods to the Pro.
    Each time I plug an iPod into the Pro I get the following errors on the Console:
    Dec 25 13:11:36 Macintosh kernel[0]: USBF: 289.304 [0x8663a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of hub @ location: 0xfd000000)
    Dec 25 13:11:43 Macintosh kernel[0]: USBF: 296.538 [0x8663a00] The IOUSBFamily was not able to enumerate a device.
    I'm going to try reinstalling iTunes. Anyone seen this before?

  • Ipod nano won't charge

    Hello there! I recently bought an Ipod and my problem is that when I connect it to my Pc it does not see to charge the battery! It is in the USB port and it updates and everything but the battery charge indicator never comes on! Has anyone else had this problem? Any help would be much appreciated! Thanks

    Hello Nmac83,
    Welcome to Apple Discussions.
    If you're connected to a hub, it may not work. Are you connected directly to the computer?
    Have a look at this article:
    iPod's battery doesn't charge
    Gary

  • Ipod nano won't charge in ihome

    My Ipod will play but not charge in my ihome. It will charge in the computer tho. Also, my battery seems to drain fairly fast. Is the battery shot?

    i have the same issue. Any ideas whats going on?

  • My ipod nano won't be recognized by my computer. i tryed disk mode n looking it up on my computer.. but it still wont show.. HELP..... ohh n it wont charge either..

    My ipod nano won't show on my computer.. i tryed da disk mode,  resetting itunes.. new cable, the control usb n all the other steps in the itunes... i dont know what else to try help.. and it also won't charge..

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • Ipod mini won't charge from mains.

    My ipod mini won't charge from the mains lead or a dock but works fine with the usb lead. I've tried different leads, sockets and resetting it but nothing works. It's a pain because if I go away from home for any length of time, I need to take my laptop just to charge it up.
    ipod mini   Windows XP  

    I say try a different charger. When I wanted to avoid having to take my laptop everywhere, I bought this: http://www.amazon.com/gp/product/B000BNZLGE/ref=pdcp_etitle/002-2209999-2570423?%5Fencoding=UTF8&v=glance&n=172282
    and it's worked fine in the six months I've had it... and besides it would cost under $10 to find the root of the problem, much more than Apple would charge, that's for sure.

  • My 4th gen iPod Touch won't charge

    Hi, folks:
    Suddenly, my 4th generation iPod Touch won't charge. I don't mean it won't hold a charge; I mean it WON'T charge. There's no (peep!) when I attach it to a Mac, a Windows box, or to the wall. I've tried not only at my place but at my doctor's office, too, on his computer. Rats.
    It fell three feet onto a concrete floor a week before this happened, so I'm unsure of cause/effect there. However, chances are most excellent that I touched it while filled with static electicity (my bed is exceedingly staticky). Maybe I touched the charging port? I have no idea, but I kinda sorta have a memory of having gotten a shock while touching my pod and wondering whether that was bad.
    It'll be a couple more days before I can get to a Genius Bar (but thank cow I'm in New York City and have my pick of them!). In the meantime, can anyone calm me down about my situation? Do you imagine it's doomed (it IS still operable provided I keep it plugged in, though iTunes can't see it since it won't mount), or do you spose the installation of a new battery might bring my precious baby back to me? It IS freshly backed up (again, thank cow!), but I'm not in a position to buy a new one right now, and unfortunately, I don't know what to do with my eyeballs without a Touch in front of them.
    Oh, how I hope someone can tell me that this has happened to him, and an Apple Genius merely did something magical and handed it back intact and amazing again so Ican cry happy tears. It's been four days and I'm just sick without it (and having to look at this gigantic Mac, with its large and beautiful text in many windows, means I can't RECLINE! WAAAAH!).
    Thanks for any soothing words you have, and if you have sad ones, well, I'll vag up and read them, as I've prepared for the worst anyway (sob!). Just please deliver them gently.
    I appreciate it!

    Wow, Kevin; that's a tantalizing theory! I don't like it (I *never* like to think about logic board damage for any piece of hardware), but it's tantalizing, as it would explain my pod seemingly charging out of thin air, and it'd also explain why my pod doesn't just DIE altogether from a dead battery.
    I feel like an idiot: I have iTunes set to never sync automatically with my pod, so it never automatically recognizes the pod. I'll bet I could sync it if I clicked to "apply," as I've been downloading new apps since 2/21 (the last time I backed the pod up, mere minutes before it failed), but I don't want to risk not having a connection that's 100% and bollixing up what's on the pod now. (I'll be in the hospital for a day and will need something to read the whole time; I'll need an intact pod!)
    Thanks for sticking with me, Kevin; I always like figgering things out, and your theory's interesting. I'll mention it to the Genius. It doesn't give me any hope, but not having any hope, I can always be pleasantly surprised, whereas if I go in all hopeful, someone can dash my dreams. This way, I'll prolly just have my expectations met.
    I appreciate your talking it out with me a lot!

Maybe you are looking for

  • 3429 - Won't detect Networking Devices (And can't manually force drivers)

    Got an "old" 3429 from a friend who's been using it at their office for a few years - Did a complete re-format and installed Windows 8 on it. But now it won't detect any of the network hardware (Ethernet OR Wireless) and I can't get it installed manu

  • VO Substitution : JBO-25006 : Invalid parameter value passed for source

    Hello All, I want to add 2 new fields (attribute columns) to an existing VO for which I am trying to use VO substitution. I have followed these steps. 1.     Downloaded all the class files from server to local machine 2.     Opened an OA project and

  • Cannot invoke default servlet through invoker????

    Does someone can help me with this exception? what it mean? How to solve? I'm using TomCat 4.0.6 The code i'm using... public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException{ String url = "/lis3d/servl

  • Lightroom 3+ (Mac OSX) Spinning Beach Ball on Import only?

    Hello --   When I first starting using Lightroom 3 on my 27" quad-core iMac, detection of an inserted memory card (Compact Flash or SDHC) was instantaneous.  It's one of the things that really attracted me to Lightroom -- plug in, and go!   Sometime

  • How to default Standard method in Bills receivable Remittance ?

    Hi Oracle Apps Experts, We have implemented Bills receivable in 11i version. The uers wants to use only Standard method in Bills receivable remittance. So we have created a receipt class with Remittance method=Standard. But the system defaults the me