IPod nano won't turn on or be recognized in iTunes or Vista

We recently upgraded to Windows Vista, so I downloaded iTunes 7.2, then plugged in my ipod which was working fine, then it said it had to be updated, but first I needed to update something in windows vista. So I updated Vista and also looked in the help section for ipod and read this:
Microsoft has released an update for Windows Vista that addresses a situation where ejecting iPod from Windows Explorer or by using the "Safely Remove Hardware" feature in Windows Vista could corrupt your iPod. Apple recommends Windows Vista customers who own an iPod install this software update. For information on how to install this Microsoft hot fix, refer to the "Update your software" section below. Tip: iPod can always be ejected safely by choosing Eject iPod from the Controls menu within iTunes.
So, I thought that my ipod would get ruined so I did the "eject ipod" from the control menu in itunes, and after that my ipod never turned on again. What happened, did I do something wrong?
I did the 5 R's already and it does not turn on. It is not even in my computer (device manager) and its not even being recognized in itunes. It just disappeared and it won't turn on. Please help!!!
Thanks in advance.
Dell   Windows Vista  

I'm having a similar problem with my Ipod (40GB, now discontinued) here's my problem:
My hard drive would spin up and then down and then up and then it would turn off. Also I would turn it on and flip to a song, it would be OK and then if I went to flip to another one the screen would freeze on me for a few seconds, then it would work then continue doing that until I got it to turn off. It did that for a few days and then the other day I turned it on and it wouldn't take me to my music screen and it came up with an Ipod that was dead and a link under it. It did this for a while and now I can't get it to work either, I turn it on now and it comes up with a folder and the apple support website and when I tired restarting it, the screen would come up with a check mark and say "Disk Mode" at the top and "OK to disconnect" below the check mark, and now Itunes doesn't recognize it and the hard drive spins and it goes on acting like iTunes sees it when in truth it doesn't.
Hope someone can help!
Erin

Similar Messages

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS1372 ipod nano won't turn on, says error 1437

    my ipod nano won't turn on and I've tried restoring it.  received error message 1437 after it tried restoring itself.

    http://support.apple.com/kb/TS1539   Try this.   It seems the error stems from some file errors in Windows.
    Cheers!

  • My ipod nano won't turn on (4th gen)

    My ipod nano won't turn on (4th gen)
    i dropped it out of my car and now it straight won't turn on
    *I've tried doing that "hold the menu and middle button" trick (i don't know if i have been doing it right though)
    Please respond i'm desperate

    Have you tried connecting to iTunes to be restored?  You may need to manually place the iPod into Disk Mode first so that it is recognized by both your Windows OS and iTunes.
    Putting iPod into Disk Mode
    B-rock

  • My ipod nano won't turn on!

    My ipod nano won't turn on. I have tried restarting and resetting it. I have tried plugging it into two different computers and both times it just kept blinking the apple logo. It's not on hold. My warranty is expired. Do I need to get it repaired or replaced, or is there something I can do?

    my ipod nano won't trun off either sometimes.. when that happens i have to hit play and have it play a song for a couple of seconds and then do the thing to turn it off andfthen it turns off.

  • My iPod nano won't turn on power button stuck down.is this servicable?

    My iPod nano won't turn on power button stuck down.is this serviceable?This is the 6th gen model

    Hi Whackers!
    Here is a link that will help you get support for this product:
    Contact Apple for support and service
    http://support.apple.com/kb/he57
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • HT2729 My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

    My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

    What video content works with iTunes and mobile devices?
    iTunes:
    Video content purchased from the iTunes Store.
    QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
    Video podcasts.
    iTunes Digital Copies.
    iTunes Store Movie Rentals (Requires iTunes 9 or later).
    Mobile Devices:
    Video content purchased from the iTunes Store.
    Videos that have been shared to iTunes using QuickTime Player (Mac OS X v10.6 Snow Leopard).
    Videos that have been re-encoded for iPod with QuickTime 7 Pro.
    Videos that have been re-encoded for iPod with iMovie, Final Cut Pro, and others. Refer to Exporting a movie from iMovie HD to iPod for an iMovie HD tutorial.
    Video Podcasts that have been created for mobile devices.
    Video files after using the iTunes File > Create New Version > Create iPod or iPhone version option.
    Video files after using the iTunes File > Create New Version > Create iPad or AppleTV version option (iPad and AppleTV only).
    See below for detailed movie specifications.
    iTunes  Store Movie Rentals (Requires iTunes 9 or later).
    Does the video need to be encoded in a special way?
    All mobile devices which iTunes can sync video to can play the following video formats:
    H.264
    File formats: .m4v, .mp4, and .mov
    Video: Up to 768 kbits/sec, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3.
    Audio: AAC-LC up to 160 kbits/sec, 48 Khz, and stereo audio.
    MPEG-4
    File formats: .m4v, .mp4, and .mov
    Video: Up to 2.5 Mbits/sec, 480 x 480, 30 fps, Simple Profile.
    Audio: AAC-LC up to 160 kbits/sec, 48 Khz, stereo audio.
    Other formats may be supported by newer devices. The technical specifications can give additional details.

  • Ipod nano (both 6th and 7th gen) not recognized by itunes

    Ipod nano (both 6th and 7th gen) not recognized by itunes. Before you send me to the help pages, i have followed EVERY STEP you provided, from uninstalling, removing temp files... you name it. I was recently upgraded to windows 8.1.

    For anyone else having this problem, I found this solution to work. Try this first:
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.
    d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    f) If still not works, try re-install iTunes. Go into the Unstall Programs (in Control Panel) and uninstall everything that says Apple, and uninstall Bonjour. With the fresh install of iTunes, everything came back and is should work. Hope it helps.
    <Link Edited By Host>

  • My ipod nano won't turn on when it's not plugged into my laptop

    Hey this is really getting me worried.i bought this ipod nano on ebay and it arrvied today. i plug the ipod nano into my laptop and it will work reconises it fine and will charge and sync but when it says it's fully charged i unplug it and the ipod just won't turn on atall and then when i plug it in the laptop again it says charging. I tried resetting it but still nothing happened
    What's going on with my ipod?
    i'm really scared i bought a faulty ipod.
    Help

    Try this to start with:
    [The 5 R's|http://www.apple.com/support/ipod/five_rs>
    Dont be worried- If you ipod is under warranty, and you haven't caused it any harm yourself(ie.if its a problem from Apple's side), then you can get your ipod replaced
    stealth..

  • IPod nano won't turn on unless i restart it 15 times.

    for some reason my nano won't turn on for whatever reason. it just started doing this one day. it will be charged and it won't turn on unless i restart it like 15 times. and untill the 15th time it will like only restart half way and then finaly it will turn on. but if i leave it for half a day and not listen to it, it will do the same thing. any suggestions?
    1st gen.    

    See this: My iPod won't turn on.

  • IPod Nano won't turn on.

    Good Morning - My Nano has been inactive for approx 6 weeks (left it in the in-laws house). Anyway I got it back today and I am trying to turn it on to update playlists, charge etc but when I connect it to my PC its not recognised by the PC and also it doesn't appear to be charging. I have tried resetting it without any joy. There is absolutely nothing appearing on screen
    I did notice that the apple icon appeared when I first connected it to the PC but nothing since. I have also tried charging it off the mains but still no joy.
    Any ideas??

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.

  • 2nd Generation Ipod Nano won't turn on

    I have a 2nd generation ipod nano and it won't turn on. It worked fine around 5pm and at 11pm it wouldn't turn on. I tried to charge it but it still didn't turn on. I plugged it into itunes and it still didn't turn on. What's wrong with it and how do I fix it?

    laurenfrombrenham wrote:
    I tried to charge it but it still didn't turn on.
    Did it charge?
    iPod Manuals
    iPod Repair Tutorials
    iTunes & iPod Hints & Tips
    Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • Ipod Nano won't turn on unless plugged in!!!

    Please help! My Ipod nano, purchased just 2 years ago, won't turn on unless plugged in to an external power source, and when plugged in the screen has faint lines across the display and blotches at the sides! It was working perfectly fine until my battery went flat one day and all these problems popped up. Whats the problem and what should I do?

    Hello Exasperatin0n,
    And welcome to Apple Discussions!
    It's likely that your Nano's battery is shot and will need to be replaced. So I would start there and then worry about the display issue. You can choose to Apple repair the Nano, a 3rd party repair company (just do a Google search for iPod Repair and you'll get a number of results), or you can even replace the parts yourself.
    B-rock

  • Help! Ipod nano won't turn on after disconnecting!

    Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

    Tuesday, December 02, 2008 7:23:56 PM
    Okay my iPod wouldn't turn on . (Guess I will be throwing out the box to ship my ipod for warranty replacement)
    at like 11pm dec 1 2008, the ipod was dead, pressing the power button did nothing.
    I thought it was a goner... I even ordered a warranty replacement..
    ipod wouldnt turn on . left it for 24 hours. when I got home from school the next day
    it tried to sync but my playlist did not exist..it even showed the folder in windows
    After trying various USB ports and seeing an Apple Icon, and "connect to power low battery"
    I even requested a warranty replacement... and apparently you throw out the box they send to cancel. I wish I could be courteous and let them know
    So in short
    PROBLEM;
    ==IPOD Won't Power on when you press the power button==
    (FIRST OF ALL , I STRONGLY URGE YOU TO NOT TRY TO OPEN THE IPOD UP,
    you will probably scratch or damage the beautiful iPod .. when it will be perfectly fine 24 hours later...)
    Try:
    RESET, and plug in to itunes and restore..
    SOLUTION:
    http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-troubleshooting-wont-turn-on-appear-hung-sad.html
    Official Apple Documentation:
    http://support.apple.com/kb/TS1383?viewlocale=en_US
    I guess my actual story will make you believe that THIS SOLUTION actually works.
    "Let the iPod battery drain
    In rare cases, iPod might get into a state in which it needs to be drained completely before it can be reset. If iPod didn't turn on after you reset it, follow these steps:
    1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
    2. Reconnect iPod to the Apple iPod Power Adapter or computer and reset it.
    I even tried the iPod on 2 computers and it was sort of detecting the serial # in Windows
    but mostly freezing up windows.
    4. " Let iPod's battery drain"
    Was the solution for my iPod 3rd generation.
    So now that the problem was fixed, I guess iPod is so terrible after all
    Just don't drop your iPod get it a nice case
    it took from 9pm December 2,2008 to about Dcember 2,2008 6:45pm
    roughly 20 hours.. so this morning when I left I pressed the button and it wouldn't turn on
    I thought maybe the battery was knocked loose but the battery was just so low or something
    To prevent this problem I guess whenever you ipod is low battery, charge it before it gets dangerously low
    As sad as it is to wait like 24 hours without your iPod just to pray that the problem is the battery or something and then it will power on..
    When it actually does power on you would see the apple Icon
    == When it was all said and done==
    I didn't really need to use "restore" option, i think itunes resynced what it needed.
    And thanks to this I upgraded to Itunes 8 .. which I was too lazy to do before
    ==STILL DOESNT WORK?==
    If you bought it less than a year ago... Warranty..
    https://selfsolve.apple.com/GetWarranty.do
    Enter your Serial# and country and it will be located at the back of your iPod under where it says 8GB or whatever (at least for iPod Nano 3rd generation)
    I always like posting solutions, so that someone like me can benefit from it.
    It is my understanding that if you do send in your iPod they don't care about the USB cord or headphones that came with it, so you just ship the iPod itself
    see here for some frequently asked questions.
    http://www.apple.com/support/ipod/service/faq/

  • IPod nano won't turn on anymore after frozen update process

    Hey, my friend asked me to update his iPod nano 1G Black (1GB) to new firmware. OK, did that.
    After the uploading of the new firmware to the iPod, it shows that Black Apple Screen, and a White Loading Bar beneath that Apple logo. But halfaway it froze, so I need to reset it. So the nano resetted, it went out, but NEVER went on anymore!
    I've tried all things to solve it, draining battery, resetting, holdswitching, and many other things that I found on forums here. I aint stupid, so "Try switching the HoldSwitch on and off, then try resetting the iPod" wont solve my problem. It stays dead...
    Also when I connect it to my PC, it won't show up, no sound of connecting hardware, screen stays black, won't charge, what the **** has happened?
    The only thing the iPod can do now is laying on the desk, and when I try to reset it, after six secs I hear a soft click, but it stays dead.
    Plz, does anyone knows where I can get support, that nano is around a year old... I can't believe that the battery is broken within a year...
    And now my friend thinks that I broke his nano, but all you guys here are having the same problem...
    Is there any emailadress where I can contact Apple, instead of placing it here?
    Man, I hope somebody can help me...
    Nillus and the dead nano

    Yup, I think that's the only way how to solve it.
    The nano is still under warranty, my friend bought it in April 2006.
    And I know an Apple Store 15 mins from my home
    Thnx for your help everyone!
    @Sakura-chan!
    I think that's the best you can do
    Take it back to an Apple Store.

Maybe you are looking for

  • My gmail Contacts will not load in Firefox, but OK in other browsers Please advise

    For months now, in each versions of Firefox, when I open my gmail and click of Mail/Contacts, an''' oops''' error message appears, and the Contacts will not load. However, in other browsers, IE and Chrome there is no problem, so it '''has''' to be a

  • Using Report Builder to make Letters

    I am trying to use report builder to create templates for letters and other multi-page documents, the query automatically inserts data from a database (the price of something for example). Whenever I try to fit the document in report builder it says

  • Issue with rating/rejecting pictures

    Hello, I've upgraded my quite old MBP Core Duo to SL last week. Since then (I believe, but not sure), I just can't successively rate or reject pictures. I just can use each command (keys from 1 to 5, 9 and 0) once. For example: If I rate a picture wi

  • No OCR

    I personally think HP has reached a new low. The web site is pittyful and has little info for us. I simply wanted help with OCR and not one place on this stupid web site helps. OCR is a simple process and needed often yet nothing works on the D110 pr

  • Stock transfer between two plants under the same company code at profit

    Hello, Hello, I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity. How can I map this scenario in SAP? What will be the cost of my part in these two plants? What mechanism I would u