Ipod Nano Wont Restore, or read Properly

Here are my Problems,I've got my Ipod Nano 2GB 2 days ago, I have Windows XP
ITunes Has Detected An IPod That Appears to be corrupted. You May need to restore this IPod before it can be used in ITunes. You May Also Try and Disconnect + Reconnect The Ipod.
So I Tryed to Disconnect + Reconnect nothing happened, then I tryied to restore and this came up,
The Ipod "Ipod" could not be restored. An Unknown Error Occured(1418)
so i went threw the 5 r's nothing worked, then I tried to do everything over, reinstall Itunes, this happened, There was a problem Downloading the Ipod Software for the Ipod, the requested resource was not found
I am getting frustrated because i've tried everything that i know i can do, what else is left, this is my 3rd Ipod that ive tried in the last week, non of them work, i just want music on my Ipod!!!
Ive Charged it for around 4 1/2 hours now

Take a look at the link below.
Error 1415, 1417, 1418, or 1428 when restoring or updating an iPod in iTunes 7 or later

Similar Messages

  • Ipod nano wont restore~error 1433, ipod nano wont restore~error 1433, ipod nano wont restore~error 1433

    my ipod nano wont restore ~ error 1433 what to do

    Hi, got the same problem as kerry221. The proposal given by stevejobsfan0123 did not solve it.
    Additionally iMac does not shut down after closing iTunes. Need to manually shut down the iMac.
    Problem occurred after last software update.
    Open for any further proposal :-)

  • 7th gen ipod nano wont restore i get error message (-23) problem downloading software for iPod!

    I bought a refurb iPod and i guess its formated for a mac so it told me to restore it but i get the error message and for some reason when i pluged it in it asked me if i wanted to reformat "removable disc drive G" which i'm sure is the iPod it self. PLEASE Help other wise i'm going to return it. THANKS!

    So you are getting Error 23 or not?
    That error indicates you have security software that is interfering with the download of the software. Temporarily disable ALL of your antivirus/antispyware software and try again. And you do have to reformat it for a PC but this should happen when you restore it in iTunes.

  • Ipod Nano Not Restoring??

    Hi,
    My ipod nano wont restore. Whenever I click restore to factory settings it says:
    "There was a problem downloading the iPOD software for the iPod "iPod". The requested resource was not found.
    I tried to reformat it and it says that Windows was unable to reformat the ipod.

    Hi Jake&jose,
    A "requested resource" error message when restoring an iPod usually is referring to the iPod, not the firmware download (although some errors may refer to this).
    So, first, try forcing your iPod into disk mode, by following the instructions here:
    Putting iPod into disk mode
    With the iPod in disk mode, connect it to your computer, and see if you can sucessfully restore it in iTunes.
    If that doesn't help, then try these five steps (nnot the last one, of course):
    The Five Rs
    Also, sometimes this can be an issue with your USB drivers. Make sure that they are up-to-date, and in some cases, you may need to reinstall your USB drivers.
    For details, see this article:
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Do you have success with any of those things?
    -Kylene

  • My ipod nano wont let me download video i downloaded off of my computer

    my ipod nano wont let me sync my videos on my computer

    Not all video format downloaded from iTunes is compatible with ipod nano. Make sure that the file extnesion is mp4 or any quicktime formats. If not, create a version on these format using iTunes or convert using a third party software. Cheers!

  • Pls help me my ipod nano wont charge even if i use other laptop or pc . The battery notification tells its full charge but when i remove my ipod its still not charged

    Pls help me my ipod nano wont charge even if i use other laptop or pc . The battery notification tells its full charge but when i remove my ipod its still not charged

    Is it not charging at all? Did you try to reset? If YES to both, request for a replacement of the ipod. Battery or the unit itself is defective. Cheers!

  • My ipod touch wont restore - I plugged it into friends computer to charge and now it is stuck. How can I successfully restore and start using my I touch again (4th gen). TKS.

    my ipod touch wont restore - I plugged it into friends computer to charge and now it is stuck. How can I successfully restore and start using my I touch again (4th gen). TKS.

    You have to put the iPod touch into the recovery mode.

  • If your iPod Nano wont turn Off....(with regards to my last post)

    My iPod Nano wont turn OFF, yes i know how to turn it off, but its not turning off. im charging it no to see if that makes a difference....please help!
    iPod Nano   Windows XP  
    Charge it until the battery appears full, then it should turn on...lol, my idea worked!!!

    Wow, ***. all of a sudden it worked again. THANK YOU BABY JESUS.

  • TS3694 iPod Touch wont restore

    My ipod touch wont restore. When i connect it to the computer it says the ipod is in recovery mode so i proceed to recover the ipod than a error message comes up saying the iPod cannot be restored (1). Any help or ideas would be appreciated.

    ERROR (1)
    I have not seen a solution for that error but try:
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • My 3rd gen ipod nano is not being read by itunes when I plug it into my mac laptop.  It says "no name" on the mac screen, I lost all my music on the ipod itself.

    My 3rd gen iPod nano is not being read by my iTunes on my mac.  When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod.  When turned on it says "Welcome" as if it is new.  I tried to copy all my music into the "no name" folder and then sync.  The iPod said it was "syncing".

    So does iTunes see the iPod or not?  I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
    B-rock

  • TS1372 ipod classic wont restore or reset

    ipod classic wont restore or reset error code 1415,,1417,

    I assume you have seen this article regarding this error message.
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • Recording problems with ipod nano - too many voices reading audiobook

    I have tried listening to two audiobookks on my ipod nano (6G) but the reader's voice  is subject to an identical part-second later echo which makes it all but impossible to understand what he is saying - any suggestions as to the cause of this fault and (hopefully) how to remedy it - thanks,        Peter

    "I'm posting this message hoping that an Apple employee will read it."
    Unlikely.
    Use this form.
    iPod Feedback.

  • Ipod nano wont come on at all

    my ipod nano wont come on at all  can u change tje battery urself

    What have you tried so far in terms of troubleshooting?  After leaving the iPod connected to an external power source to charge for at least 30 minutes, have you tried resetting it?
    How to reset iPod
    And yes, you can swap the battery out yourself.
    B-rock

  • Ipod nano wont sync or restor

    This is my first ipod of any kind. and i just got the Ipod Nano 4th gen. when i go to the summary tab to restore original settings after going through all of it a window opens up and says "There was a problem downloading the iPod software for the ipod "iPod". You do not have enough access privileges for this operation."
    i had at first tried syncing it to my Realplayer but then found that would not work even tho thats where i had been getting most of my music. It had asked me to set the Ipod to manual syncing or something like that i cant remember but it wont repeat it. anyways it set it to that for me and now i cant seem to get ipod to work with itunes at all... I just want it to sync with itunes and ill use that only to save the trouble.
    I have went through all the steps to reseting it according to the apple support site but it did not work.
    Message was edited by: ploofelune

    What is the exact wording of the error message?
    Why won't it sync?
    Are you running the latest version of iTunes (10.7)?
    B-rock

  • Ipod nano wont sync properly

    My ipod nano will not sync when i try to apply new songs.  It initiates the sync but then the computer freezes.. has this happened to anyone before? 

    What version of iTunes are currently running?  To check, head to Help -> About iTunes.  Make sure it is the latest version 10.6.3. 
    v10.6 had some issues with freezing while trying to sync content to your Nano.
    B-rock

Maybe you are looking for

  • Using Lightroom 5 with Photoshop CS4

    Hi folks. New Here. I am a novice convert to digital photography and I have browsed the discussions concerning Lightroom and Elements in the main. Is there any need to buy Lightroom 5 to deal with cataloguing and searching imported RAW images with Ph

  • My Apple TV no longer plays anything from my mac. It does continue to play Netflix.

    My Apple TV will not play any intent from my iTunes account. How can I fix this?

  • Cannot edit text in Master Page

    I don't work in InDesign often.  I had created a template file for a book back in December of 2011 (originally created in CS3).  I opened this file in CS6 today and did a Save As.  Now it's time to edit a few things to customize it for this new book.

  • Listing: hide variable in a vertical position

    Hello, I know that I can save my global variable value using HIDE operator. But it stores value only for a line, I mean if i have many columns I get the value for all columns. I need to get different values for different rows and columns Do you know

  • MDM Catalog - records filtering for different users

    Dear Experts We all know that there are two ways of restricting users from seeing all the catalog records - Masks and Named Searches. In a scenario where I'll have say, 100 users, who'll see 100 different subsets of catalog records, will i have to cr