Ipod no longer beeps on push alearts?

Hi all, when ever i receive a new message or any push notification, i can only here it through speakers/head phones. It used to beep whenever i got one, it still beeps for an alarm or timer.
1st gen 8gb with iphone OS 3.1.1

BUMP

Similar Messages

I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording; but when i hear it, its just a long beep. Need some help!

I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
but when i hear it, its just a long beep. Need some help!

Does the mic work for other apps like Voice Control?
Does the mic work OK in other devices?
Have you tried it with another mic?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPOD NO LONGER MOUNTS/ CAN BE SEEN

Hi,
I'm sure there's a simple answer to this (hope so anyhow). I recently formatted my (third gen) mac formatted i-pod. I did this using a pc, though I did not use itunes to do this (I know, I know...).
However, I obviously did something pretty seriously wrong as the ipod can now no longer be seen by either the PC or the mac. The ipod wakes up when you push buttons, but just shows the "apple" logo and nothing else.
I have reset it many many times, but don't know what to do next as I can't even see the ipod on either of my computers.
Help me please!
:0(
Thanks in advance,
Michael.

Hi,
Connect it with a Mac (you may need to put your iPod in disk mode)
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”

My ipod no longer can be formatted by IPOD UPDATER.

My ipod no longer can be formatted by IPOD UPDATER. It gives me a Cant mount ipod error now as well. It shows up in device manager as Player Recovery Device Class, and other pc's and macs cannot recognize it. Ive tried multiple ports and it does not work. When it is connected to the port it beeps as it should but then it will randomly beep as it is connected.
Also it does not work at all disconnected from the computer. The light doesnt work on it at all and there is no response whatsoever.

Hi Clayton and everybody.
I got same problem with my Shuffle: the iPod doesnt play, it doesn't response to any button, no LED works. When i plug in the USB 2.0 port i've always used before (with any problem), WinXP Pro says "the device would work better in 2.0 usb" even though I have 2.0 usb, and i need to install a new hardware as a player recovery to get the iPod Updater recognizing it as a "recovery mode".
As you said, there is only option to do a Recover, but when it starts the proccess, the USB unmount (DIDU sound argh!), and the iPod Updater tells me "Error when trying to write disc" after a few minutes stuck in the recover proccess. I've tried in 3 different PCs, and same error...
I've been without using my Shuffle for 1 week (since it suddenly stopped playing music, due to low battery I thinked)...much more than 24 hours! And it doesn't work!
Should I keep trying the "recovery mode restore" expecting for a miracle or what? What can i do? Please help, i would like to do anything possible before aplying the warranty...
Thanks! And sorry for my bad english!
PC Windows XP Pro PIV 3,2Ghz, ASUS P4P800 MOBO, 2GB DDR, 6800GT

How long does Apple push iMessages?

My MacBook Pro has been offline for approx. two months now. When I started the iMessage App today there was no conversation from after the last time my notebook was online. Also I didn't receive new iMessages while being online. The address is the same on all my devices (iMac, iPod and MB Pro). I haven't changed any settings since the setup. So my question simply is how long does Apple push iMessages to iDevices? Even iMessages I had sent on Christmas from my iPad or iMac were not displayed. Although I restarted the app multiple times nothing changed. It would be interesting to know, if the "old" iMessages which were sent from my other devices can be synced to my MacBook in any possible way. Thanks for any help given.
I'm sorry for my bad English.

I'm confused guys... yesterday when I did the up-to-date, I was given the code right there in the online Apple store when the 'order' was processed - even tho it was listed as 'free'. Are you not even getting the order processed in the Apple store?
the link posted by mtlscream2 above isn't the shortcut one... use this!
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?partNumber=MD202Z/A
here's what I saw online:
Mac OS X Lion Up-to-Date
$0.00
1
$0.00
Product Number: MD202Z/A
Licensed to:
planetMitch Aunger
Mac OS X Lion Content Code:
redacted

Long beeping sounds during iPhone 4s calls

Often when I am on calls longer than 5 minutes I hear a long beeping sound, almost like someone is pushing a button. Does anyone why this is happening and how to fix it I have a 4s?

Is this with all calls when using a headset or just some?
If some perhaps there's a second call trying to get through & it's notifying you there's another call waiting or if it's a Bluetooth headset maybe it's telling that it requires charging.

IdeaTab Lynx K3011; annoyingly long beep?

I'm not sure if this is a 8.1 issue or not since I just got the tablet a day before 8.1 was released. I'm sure it's a security feature since it seems to happen when the vents are blocked or when I push the CPU. I don't know what's causing it since it comes with no warning message or anything but when it starts it's a loud, long beep that lasts 2-3 minutes and becomes annoying very quickly.
It seemed to happen after I installed 8.1, updated all the drivers, put in a faux leather case, and especially when I hold it on the sides (blocking the vents). Today it also happened while I was running a large resource program.
Is there any way to turn it off? Make it end quicker? Or any information?

Rob,
I've not heard of this before and will need to look into it. I think you are indicating that this seems to be a warning beep tied to an increase in system temps either driven by CPU loading or blocked air vents?
Thanks
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

IPod no longer registering in Windows or iTunes

I am registering this as a new thread as the previous two related threads are marked as answered and it is obvious from the content that they are definitely not!
I have a problem with my 30GB iPod no longer registering in Windows or in iTunes since I updated to iTunes 7.1.1.5. In my case when I plugged in my iPod not only did iTunes not recognise it but iTunes froze and my whole laptop slowed until I forced iTunes closed.
I have tried all remedies previously mentioned but no success. The 'reset all settings' mentioned in previous thead has not worked either but at least iTunes does not now freeze when I plug my iPod in.
My iPod works with my daughters laptop operating on Windows 2000. Is this therefore a problem with the new iTunes and Windows XP? I notice all the other people with problems are running XP. If so is this a bug and can Apple release a fix?
Dell Latitude Windows XP Pro with SP2

I am adding to this thread as well because I am having exactly the same problem. Sorry if it seems a bit long, but I want all to have as much info as possible.
Things started "not" happening after install of Itunes 7.1.1.5. I can no longer see my ipod in windows or itunes. It works fine for playing. It charges and everything, but it has become a big no erasable mp3 player.
I have tried just about every option on all of the threads I have read on this forum. I have spent days on this and still no progress. Forget being solved, I hven't seen any positive results yet from any of these suggestions. I know they don't all apply to the same computers but I still have tried the 5 R's., delete USB controllers and reinstall, attempted new driver, but there wasn't one. I've tried every usb port available on the machine. I've tried the reset, the disk mode, everything on these forums. I think I might be missing steps but I'm usually pretty thorough.
Did I mention, I've tried this on 2 different machines? Both had itunes 7.1.1.5 installed. I'm afraid to try any other machines, in fear of having the same happen and if it is itunes, I potentially will mess up the machine(s) for nothing.
Any help with a new soltuion would be greatly appreciated.
My last resort would be to call Apple, but from comments on the forum, it might not be helpful. And sending it back for a new one doesn't seem to make a difference after reading the forums.
So please......any new ideas? Apple please help.

IPod no longer on Desktop

Hi
apologies if this has been asked before but, my 20G colour iPod no longer appears on the desktop. It appears in iTunes and functions as normal. I have Finder preferences set to show removeable media - but the iPod is missing.
Any ideas why it might suddenly decide to do this?
Thanks
ian

Try this: http://docs.info.apple.com/article.html?artnum=61771
If that does not fix things, look through the iPod Troubleshooting FAQ I helped write
Good luck

IPod no longer mounts since Leopard upgrade

My iPod no longer mounts since I upgraded to Leopard. I'm using a USB 2 port that's part of a third party PCI card I installed myself. Used to work fine before the Mac OS upgrade.
If I reboot with the iPod already plugged in, it mounts.
Help?

Forgot to mention that I had tried those:
Authorize your purchases from an administrator account
-> Yep, I'm the admin
Authorize using the correct account name
-> Nothing changed- I am only authorizing my devices, and only use my account on the machine. Definitely using the right account name.
Turn Off User Account Controls (Windows Vista and Windows 7 Only)
-> Did this a long, long time ago, so definitely not the issue.
Remove the SC Info folder
-> This was the only new thing that I had seen yesterday when I tried it, and went through these steps, to no avail. Still exactly the same problem. I closed iTunes, deleted the folder, rebooted and relaunched iTunes and synced the device. Same thing.
The problem is the computer IS authorized, and I can sync one device, but not the other. No problem with iPhone 4- just iPod Touch, 3rd gen. It seems to be in a weird state.
One thing would lead me to believe it's a PC/iTunes problem, but then it is only with one device and not the other. Hard to point to the root of the problem. I just don't want to lose the data on the iPod- I've done a lot of work on it.
Thanks,
Jeff

Why does my ipod no longer work with my alpine car stereo

my ipod connects directly to my alpine car stereo and up til now it has worked great. i recently synced my ipod to my computer and i think it updated the software on my ipod and now my ipod no longer works with my alpine stereo. what is up? did apple change something that would make my ipod no longer compatible with my car stereo? if so, what do i do? i have about $1000 invested in my car stereo and ipod specifically for car use. this is a serious issue for me! i just want my ipod to work like it did…
i just connected my friends ipod and it works fine. he has version 1.1.1 software on his. i have version 2.3 on mine. since my ipod works fine by itself i’m assuming that the incompatibility between my ipod and my alpine is due to the software update.
here again, what do i do? how can i get an older version of software back on to my ipod?
ipod v.2.3 Mac OS X (10.4.9)

what kind of connection do you have? do you use the ipod 30 pin cable that connects directly to the head unit? it so, maybe you could get help on the alpine site, or a similar site?it could just be a bad connection. you may just have to go oldschool and use rca cables and plug those in...

I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?

I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?

If it's an older iPod, its software is not being updated by Apple. So, I don't see how updating iTunes would make the iPod not work with the car's audio system, since iTunes just updates the song files (not how the iPod operates).
Does the iPod work by itself (play songs), when disconnected from the computer and iTunes?

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

My Ipod touch is in recovery mode but when I go to restore it in itunes it only stays connected for a few seconds then ejects itself. How do I keep my ipod on long enough to restore it?

My Ipod touch is in recovery mode but when I go into Itunes to restore it, it will only stay connected for a few seconds then ejects itself from itunes. How do I keep my Ipod connected long enough to go through the restore process?

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

TS1591 my classic iPod no longer appears in iTunes window when connected to iMac. does this mean my device is no longer supported by iTunes? or incompatible with OSX?

my classic iPod no longer appears in iTunes window when connected to iMac. does this mean my device is no longer supported by iTunes? or incompatible with OSX?

Hello stiannac
Check out the article below for troubleshooting to get your iPod showing back up on your iMac
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Ipod no longer beeps on push alearts?

Similar Messages

Maybe you are looking for