IPod no longer connecting to the car

My iPod touch has stopped connecting to the car. It says it does not support this accessory, the car says no audio files. It has been fine for months. I have reset and restarted the iPod. I've tried my iPad with the car and that's still fine so it must be the iPod rather than the car. I started it playing an audio book this morning it it wasn't in the right place in the chapter so I unplugged it to alter the chapter position, when I reconnected it, it just wouldn't do anything. Any help would be gratefully received. Thank you.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. done
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.

Similar Messages

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • After iOS5 update, iPod no longer connects to car stereo

    Hi,
    my husband and I both have an iPod touch 4th generation.
    We also have a Dodge Caravan with a car stereo, that lets up hook up the iPods and control them over the display. The cable does not charge the iPods, but we knew that.
    I have updatedt my iPod a while ago and never encountered any problems with the car stereo.
    My husband updated his iPod to iOS5 today, and the car stereo does not connect via the cable. On the iPods display it just says, an error has ocurred.
    Would that be a hardware issue? The iPod is a month or two past warranty. We already tried restarting and resetting the iPod (not to factory settings).
    Is there maybe a way, to return the iPod to iOS4?
    Thanks for any help

    Sometimes, when you cannot "see" your ipod, it is because the drive that was assigned to the ipod, when you connected it, is already being used by the other devise. Your ipod is connected, but is "under" the other item, which means that you have to disconnect that item, so that you can "see" it. It will not be one of the drives that are normally associated with the computer like the C drive, or the ones assigned to your disc drives. It would be a drive that was assigned to an external devise, or another USB devise. This may or may not be your problem, but it is worth a shot.

  • I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car.  my car is a 2013 mercedes E350.  Is there a way to go back to an older version of the itunes software?

    I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car.  my car is a 2013 mercedes E350.  Is there a way to go back to an older version of the itunes software?

    If it's an older iPod, its software is not being updated by Apple.  So, I don't see how updating iTunes would make the iPod not work with the car's audio system, since iTunes just updates the song files (not how the iPod operates).
    Does the iPod work by itself (play songs), when disconnected from the computer and iTunes?

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • Getting error"Broker Client is no longer connected to the Broker Host"

    HI Guruu2019s,
    I'm trying to featch Data from SAP  using IDOCs  in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also  I start my Real-time service, it is showing green symble  -" Weating for Idocs "
    when start Idoc process from SAP system ,I'm getting below Error-
    *"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
    Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
    I'm doing wait for your response.
    Thanks & Regards,
    Rajeev kumar
    SAP-BODS Developer

    Greetings cdewinkel,
    It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Make sure that your device is on
    Also make sure that you can get to the Home screen.
    Get help if you have one of these issues:
    Your iOS device won't respond or turn on.
    Your iPod won't turn on.
    You forgot your passcode or your device is disabled.
    Make sure that your Mac supports your device
    See the system requirements for iPhone, iPad, or iPod.Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable. 
    Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
    You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust. 
    Learn more about the Trust This Computer alert.Restart your device
    Restart your iOS device or reset your iPod.Restart your Mac
    Turn your Mac off and back on.Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software. 
    Get more help
    If you still don't see your device in iTunes, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Unknown error -3212. I updated to iTunes 11.4.  I can no longer connect to the Store.

    I updated to iTunes 11.4 when prompted.  I can no longer connect to the Store.  Tried all troubleshooting, checked Firewall, and my internet connection is fine.  I re-downloaded iTunes and selected the "repair" radio button.  Still has not resolved "unknown error occurred (-3212)".  Does anyone have any other suggestions?

    Hey there ILSquid,
    It sounds like you have checked your firewall settings, and your internet connection but cannot get to the iTunes Store with your iTunes application and you get this error number 3212. I would look over the troubleshooting in the following article to see what steps have yet to be done. Infact I would recommend doing the troubleshooting sequentially from top to bottom. 
    Can't connect to the iTunes Store
    If you still cannot get to the iTunes Store there is a more advanced troubleshooting article with more to try, here:
    iTunes: Advanced iTunes Store troubleshooting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

    how do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

    Hi, JTCW33. 
    Thank you for visiting Apple Support Communities. 
    If you still have possession of the iPhone you wish to wipe, here are a couple articles that will walk you through the process. 
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If you no longer have access to your device, it will need to be connected to the Internet in order to remote wipe the device. 
    iCloud: Erase your device
    http://support.apple.com/kb/ph2701
    Cheers,
    Jason H. 

  • I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

    I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

    Greetings cdewinkel,
    It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Make sure that your device is on
    Also make sure that you can get to the Home screen.
    Get help if you have one of these issues:
    Your iOS device won't respond or turn on.
    Your iPod won't turn on.
    You forgot your passcode or your device is disabled.
    Make sure that your Mac supports your device
    See the system requirements for iPhone, iPad, or iPod.Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable. 
    Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
    You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust. 
    Learn more about the Trust This Computer alert.Restart your device
    Restart your iOS device or reset your iPod.Restart your Mac
    Turn your Mac off and back on.Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software. 
    Get more help
    If you still don't see your device in iTunes, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • My computer is no longer connecting to the TV. through HDMI

    My computer is no longer connecting to the TV. I was using an HDMI and an adapter to my macbook pro 2013. It was working perfectly fine eariler today but then stopped working. I tested it on another mac and it did not work as well. The HDMI is alright since we tested it on the PS3 answers please?

    Wow... I found this in another thread from the user DocBlueDog, I did this and it worked.
    Looks like Apple's latest update screwed up a lot of iPod owners... that's horrible.
    Anyways, if anyone is having the same problem, try this:
    Re: OK Here is A WORKING SOLUTION
    Posted: Feb 3, 2006 9:20 AM in response to: DocBlueDog
    Click to reply to this topic Reply email Email
    Just got off the phone with amazing tech support guy at www.ipodresq.com -
    He talked me through this without having to send in my ipod. AMAZING.
    (This is a second hand description. Evaluate it and try it at your own risk).
    So disconnet your ipod. Quit Itunes.
    Go to your utilities folder and look for ipod updater.
    Inside you'll see a folder IPOD SOFTWARE UPDATER and DISK UTILITY.
    Open DISK UTILITY AND the most recent updater IPOD UPDATER 2006-01-10.
    Reset your ipod by holding down the menu key and the center key together until an apple logo appears. Plug in your ipod.
    Ideally you will see it in disk utilities. In the ipod updater go ahead and hit RESTORE. Yes this will wipe your ipod of all data but hopefully most of it is in itunes or on your computer.
    When updater is done HIT CANCEL and then quit updater and quit disk utilities. It should be on your desktop.
    Just to be safe disconnect your ipod and reconnect it. (superstition).
    Launch itunes. It may attempt to update your entire itunes library. Mine said there was not enough room so I just hit cancel.
    Then I couldn't drag anything to the ipod because the ipod options were set to automatically update and I had to change it to manually update. Now I am relouding my librarys to my ipod which is working with my computer again.
    WHY I should have to deal with calling apple and being told my ipod needed to be sent in to be repaired is beyond me. Love this companies products but wish they would step up more on support.
    Good luck.
    All best,
    Rob

  • HT201401 My bluetooth is no longer working in the car - it keeps 'searching' for devices

    My bluetooth is no longer working in the car - it keeps 'searching' for devices.  Anyone ever had this issue?
    Thanks

    Can you connect from your phone to another BT device, not the car?  If you haven't ,I'd try a reset of the phone by holding the home and power button down.  Next step would be to talk to your dealership and see if they have any ideas. Sometimes software can either get updated on iOS or on the vehicle and it can cause problems.  Every dealership seems to have a go-to person that handles issues like this.  Getting to know him or her well and getting their direct phone number will pay big dividends.  A device restore might be necessary, but if it were me I'd talk to the dealership first. 

  • Why does my ipod no longer play all the items in a playlist?

    Why does my ipod no longer play all the items in a playlist?  I have to go to each item individually to select it as it no longer goes from one item to the next.

    what kind of connection do you have? do you use the ipod 30 pin cable that connects directly to the head unit? it so, maybe you could get help on the alpine site, or a similar site?it could just be a bad connection. you may just have to go oldschool and use rca cables and plug those in...

  • TS3274 I am trying to do a software update on my ipad third generation...even though i am connected to the internet, i get a message saying "iso 6 failed verification because you are no longer connected to the internet"

    I am trying to update my software on my ipad 3rd generation...Even though I am connected to the internet, I get and error message saying, "iso 6 failed verification because you are no longer connected to the internet"  Can anyone help?

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

Maybe you are looking for

  • Output signal high at DIO lines of 7330

    Hi I am using Labview 7.1 with Ni motion controller. I am trying to detect the output signals at the auxiliary DIOports of the card using the attached programme in the NI example finder. My board ID is 1 (thats what was allowed by the programme) and

  • How to show blank as zero in Analyzer

    Hi Experts, I have a question regarding the display of empty cells as 0 . I use some selections and for some selections there are no data (empty cell) in the query. But I need to show this empty cells as 0. I Replaced  original key figure with a form

  • ALL in page item

    Hi, I am trying to make ALL to appear as the default on page items (i.e., after rearranging crosstab layout, I want the users to see ALL appearing in page items before they select from LOV). Thanks for your help.

  • Synchronization completed - No orders

    Dear all, This is in sequence to my earlier thread where I reached the point of getting MAM appear on my PDA as a link. The current status of my system is that I completed the MAM related customization in E.C.C. 6. The technical person has enabled th

  • Very very slow rendering

    Hi, I purchased Pro_Motion_Menu_Kit_02 from precomposed.com, this is to add moving menus to DVDs, it allows you to add your own still images and short film footage (30 secs or so )to personalise it. When i purchased the Menu I had CS4, now Ive got CS