Ipod not being recoginzed at all.

I plug in my Ipod and the backlight goes on like it is connected, but is not charging or showing up anywhere on my computer. I have updated everything and did the 5 R's thingy and have restarted my computer and reset my settings on my Ipod. I need help because i need more music on my Ipod. I have been listening to the same songs for the past 2 months...HELP!!!

hi, same problem here, i have a 20g ipod 2 years old.
the sync with usb dont work anymore. i have tryed on other computers even on mac, but my ipod isent recoginzed.
so i have tried on my other computer who has firewire and with firewire the snyc works fine.
i have also tryed with an other usb cable but no chance.
so i anyone has a clue please let me know ...
the problem is all my mp3 are on my laptop and i dont want to transfer all my mp3 to my other computer because i use it for gaming
thx

Similar Messages

  • IPod Not being recognized with all the software updates

    I've been without my iPod for a few weeks now and I desperately want it back. I dropped it a while back, and have come online to look up stuff to restore it, but none of that is working for me. I reset it by pressing "menu" and "Play" at the same time, then put it into disk mode by pressing the "ff" and "rwd" buttons together, but even in disk mode my computer is not recognizing it at all. The iPod screen says that it is in disk mode, and says it's okay to disconnect, but its not giving me the option to restore when I connect it to my computer and open the iPod updater.
    It also gives me the file folder w/ an exclamation point whenever i don't put it into disk mode. And the few times that my computer does pick up something the iPod updater flashes a message that says "Can't Mount iPod" and then the updater manually closes itself. Anyone know what to do?
    Thanks
    20GB with Dock Connector   Windows XP  

    For "Cant mount iPod" - please try the following first
    Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC
    If still cant solve it then
    The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • I have a 2006 ipod not being recognized by the latest version of itunes. Any solutions?

    I have a 2006 ipod not being recognized by the latest version of itunes. Any solutions?
    I can see and listen to all of my music from the ipod on my stereo or thru headphones but for some reason, itunes doesn't see this device.

    Hi sunsets123,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps that may help if iTunes is not recognizing your iPod classic:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • HT4539 purchased music is not being downloaded to all authorized computers.

    purchased music is not being downloaded to all authorized computers.

    Did you have 'automatic downloads' turned 'on' on those computers when you bought the music ? If not then, if the music is still in the store, you should be able to re-download it on each computer via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page
    Or you can copy the music between your computers : http://support.apple.com/kb/HT4527

  • GPU not being used at all. (gtx 860M). Lenovo Y50-70 laptop.

    Hello!
    I recently upgraded to windows 10 via windows update and did a clean install after the upgrade. Installed all the neccesary drivers etc etc. The usual drill. I consider myself rather tech savy.
    After a few days of casual gaming with LoL i noticed that my Nvidia GTX 860M GPU was not being used AT ALL, only the integrated Intel HD 4600.
    This was further proved to be right after I installed Path of Exile and kept getting BSODs each time after around 10 minute of playing with various error messages revolving around the file "igdkmd64.sys". I've tried completely deleting the drivers using safe mode and the driver cleaner program and reinstalling other drivers (ex. the lenovo driver dated 14/7. ) with no luck.
    I've tried all the settings within intel hd graphics and nvidia controlpanel. I've also tried checking BIOS. No luck there either.
    Both of the GPU's also show up in device management without any issues.
    I also tried disabling the intel hd graphics within device managent which resulted in the basic adapters being used and my screen looks bad...  My current Nvidia driver is 353.62. I'll post some various screenshots here:
    Device management with both activated:
    http://bildr.no/image/Rjk3ZFpK.jpeg
    Nvidia control panel with both GPUs active in device management:
    http://bildr.no/image/L3lYb1ZC.jpeg
    This shows up when I try to check Nvidia display settings when intel HD graphics is DISABLED in device management. It basically translates to:
    "Nvidia displays ettings are not available. You're not using a display connected to a Nvidia GPU"
    http://bildr.no/image/TS85TTZp.jpeg
    My display settings options with intel HD graphics being disabled:
    http://bildr.no/image/ZUh2SVJV.jpeg
    Can provide further information if required. Not sure what you need to know, but bottom line is that my GTX 860M GPU is not being used for anything at all.
    i'm assuming that all I can do for now is to either wait for updated drivers from lenovo or to roll back to windows 8.1 (Works fine in win 8.1)?

    More than a fix I think it has more to do with the graphics drivers and in some cases Windows 10 installation issues.
    About the Graphics drivers,
    Try uninstalling the NVIDIA GPU in Control Panel > Device manager
    Uninstall everything related to NVIDIA in Control Panel > Prgrams & Features
    Restart the system and wait for it to install the NVIDIA GPU again.
    I would also advise that you try older drivers, if they are available.
    About Windows 10 Installation,
    I have installed Win 10 twice now. In my previous Win 10 installation my system was running slow, Cortana was not working and couple more issues.
    In current installation, everything is working great till now.
    What I did different in second installation -
    I installed all drivers upgrades for Win 8.1
    All windows updates for Win 8.1 before upgrading to Win 10
    I downloaded Win 10 ISO and started Win 10 setup from a bootable USB (by running Setup file while logged into windows 8.1)
    During upgrade, I did not Apply Updates for Win 10 (Selected the bottom option)
    Then windows installed normally
    Updates to Win 10 were applied after installation.
     

  • Ipod shuffle generation 2 not being recognized at all

    I just bought a ipod shuffle generation 2, and i went ahead and installed itunes 7.02. I then connected the ipod, but windows did not ask me to install any new software. I then went to Device Manager and looked to see if the ipod was being recognized, and it shows up as a yellow question mark called unknown device. I tried to reinstall the drivers, but when windows does a driver scan, it says the following...
    "The hardware was not installed because the wizard cannot find the necessary software"
    The ipod worked on my dads laptop, but my will not computer doesn't want to recognize the ipod at all. The ipod did not come with any software, so I am trying to use itunes 7.02 as it requires. If anyone would be willing to try and help me, I would be very grateful. I'm running windows xp pro.

    I have no idea what Dell or Apple told you, so we'll start from the beginning.
    First read this: http://docs.info.apple.com/article.html?artnum=305136 I am assuming since you talked to Dell your USB Driver is up-to-date. Reload your USB Driver anyway follwing the steps in this article.
    Next disconnect any USB Device you have connected other than your keyboard and mouse.
    Connect your iPod to a USB port on the rear of your computer and see if your computer can recognize it. If it can, right click on the iPod and change the driver letter to a higher letter (M or P) and then reformat your iPod (FAT32 format).
    If iTunes can now see your iPod, Restore it.

  • IPod not being recognised in iTunes

    Hi all
    I sold my iPod on eBay and, as far as I could tell, it was working perfectly when it was sent off. The buyer has sent it back to me claiming it wasn't being recognised in her iTunes and to my surprise it's now not being recognised in mine. I plug in the iPod and it charges through my Mac but does not become recognised in iTunes at all. Does anyone have any ideas as I am going to have to refund the buyer AND the iPod seems caput so it would be great if I could get it working one way or the other. Thanks so much in advance.

    I tried what you suggested but it didn't seem to work for me. When i started the error check nothing happened, the bow for checking errors closed immideiatly after i clicked start. Did you do anythig else before checking the drive for errors, like put it in disk mode?

  • Ipod not being recognized on the system, not getting reset,retry,restore,..

    hi all
    my ipod is not being recognized on the system..
    i dont know wat is the problem
    i tried the 5 Rs thing and i didn't get any king of result..
    i dont know wat to do
    please someone who could find a solution for this please reply and send me the solutions
    thanks..
    bye.

    See this...
    Windows Does Not Recognize iPod
    btabz

  • IPod not being recognised by Windows..cant change the hardis

    All,
    Pls help a iPod freak out. I recently recieved a new ipod via Apples Warrenty conditions sound good right... Wrong!
    My new ipod is not being recognised on my pc.
    I have:
    Reintstalled the latest Ipod Sw 2005-26-6 (and the original version 2004 8-6)when the latest load didnt work. reinstalled iTunes and tried to restore my ipod.. when i do, i have a pop up that says that the ipod is locked!!. I have gone on the aple support website and it tells me to format my ipod for windows i need "iPod for Windows Software 1.0" but it states that this is not found on the Apple website! My original pacjkaging only had the one disc with itunes and ipd sw (no specfic Windows sw)... And even if this sw is on the disc.. it wont connect to my laptop as its formatted for a mac!! Im going on holiday in two days.... PLS HELP ME.

    I have the same problem! My iPod worked for about 2 hours and then, it froze and turned off and now all I get is a sad iPod icon. I have done everything and it will not reset/restor/go into disk mode or anything. I have downloaded all new software and my PC won't recognize anything.

  • 5th generation IPOD not being recognized by my Macbook

    I recently purchased an Ipod Touch and it works fine. Now my 5th gen video Ipod is not being recognized by my macbook. I've tried it all restart, disk mode, checked the cable, switchd the port but nothing seems to help. It just does not appear on my macbook it will charge on a home or car charger but not through my mac book as if it doesn't exist!!
    Please help Thank you

    What have you tried so far in terms of troubleshooting? Did he give you the cable that was originally included witht the Shuffle? I ask because if you are using a 3G/4G cable it will not work with the 2G Shuffle.
    Have you worked through all the sugguestions here as necessary?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • IPod not being "recognized" by Windows XP

    So I just got my 30GB iPod Video and I installed all the software and stuff. I hooked the USB cable up, but each time windows says "USB Device not Recognized". I looked at the message and it says something about a driver not being installed for the device. If anyone could help me I would love it!!! I've done EVERYTHING!!!

    I hope this will help. I had installed my 5th Gen. 30 Gig iPod on my computer which originally only had 1.1 USB ports on it at that time, and it did sync and work, but I wanted to be able to sync faster. So, I had a 2.0 USB card installed. This card would not recognize my iPod at all. I reinstalled iTunes and iPod software thinking that would help, but nothing helped the 2.0 card simply would not work with the iPod.
    So, I went to the iPod search site and did a search to find approved 2.0 usb cards. That yeilded several pages of approved USB cards. I took this list to my computer guru, they ordered me one of the approved cards, took out the first "generic usb 2.0" card they had installed and put in the new on. Guess what, it immediately worked when I plugged in my iPod!!! It copied 59.2 minutes worth of music to the iPod in less than 10 seconds! I am amazed how much faster it is.
    I say all of this to say that your computer's USB card may not be compatible with your iPod. If not, change out the card with one that is. I hope you will have the same success I had. What a difference it makes! Good luck.
    Dell Dimension 4300   Windows XP   5th Generation 30gig iPod

  • IPod not being recognized by anything? This may be the FIX.

    Have you seen this during install? (If not read anyway)
    "usb mass storage device - an error occured during the installation of this device - the data is invalid"
    You may or may not be aware of this problem. I will explain how to check and see.
    Go to device manager (start menu, right click on my computer, Click manage. Goto device manager.(on Left) Look at the Universal Serial Bus Controllers. Bottom right(expand if needed)Do you see an ipod with a yellow mark next to it? If so follow the next step.
    You need to search your computer for this file USBSTOR.SYS
    (Go to Start menu - search - all files and folders)
    When you find it, right click on it and click copy.
    Then you will need to paste it to this location. c:\windows\driver cache\i386\
    Go back to Device Manager, right click on the ipod (as mentioned above)and select update driver. Click next to install automatically. It should have installed the proper driver now. Plug in your iPod and see if that did it.
    Please let me know if this worked for you.
    Self Built Windows based BEAST!!! Windows XP Pro

    Has this helped anyone? It fixed it for me. Before I fixed it, my Shuffle was not being detected by Itunes and was shown in my computer. Check it out, it could be the fix.

  • Ipod not being detected by Windows

    Hey! I've asked this question before, but no one has given me anything yet. Not being selfish or anything. But when I put in my ipod my computer tells me:
    One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
    For that, Itunes doesn't detect it either. Can't put songs on when that happens and it leads to an very distressed kid. Can someone help me and others who have this problem?

    but then I'll have to get all the song from CD's again.
    If they are all in your iTunes library and you sync your iPod, when you get a new iPod, you just need to sync it to the library. If you've been manually managing your iPod's content, and the songs are not stored on your computer, well, you were taking a chance that the iPod would break or get lost.

  • Video Ipod not being read by CPU(Need Help other post did not help)

    My 30G Ipod is not being read by the coumputer, I tunes, or even the Ipod restore software. When i plug in my pod it turns on and charges...i can play music. When i turn it off there is a battery symbol and it says charging...i reinstaled ipod software...i did the two button reset, i tried it on all four of mr PC's Oh yeah...it make a soft high pitch noise when it charges.

    I can't help I'm afraid! I have exaclty the same unresolved problem and getting severely miffed that a £300 product has suddenly became a heap of junk.
    See it on ebay soon!

Maybe you are looking for

  • Alternate Row Shading or Formatting

    Hello, I have a report in which I want to shade the backgroud color for alternate rows.  More specifically, I'm trying to do this for a group footer (the details are suppressed and the group footer is the most detailed level displayed).  When I do th

  • CRVS2010 - Is it ok if previous version of CR is installed on target box

    Hello, I know this was not recommended during CRVS2010 Beta but i could not find any official document stating the same for CRVS2010 production release. Can you please let me know if it's Ok to have a previous verisons of CR runtime installed on the

  • Masks have disappeared

    I have been working on this project for months. This is a jpg sequence, 11 seconds, 25 fps. Resolution 4272x2848. AE CS4 I have used many masks, 114. I use them to delete the background, it's a complicated scene. My project has autosave and I also sa

  • R12 Vision Demo install issues

    Hey all, I've just installed R12 on OEL5 however when it gets to the Validate System Configuration screen the following show as not starting properly: HTTP, Help Page, Virtual Directory, JSP, Login Page. If I used adpacctl.sh to start apache, I get a

  • Sun's Forte IDE on RedHat Linux:

    Hi, Has anyone used Sun's Forte IDE on RedHat Linux? Do you think it's good?I read somewhere on this site that it comes with RH 7.3 & up. How can I install it? Thank you for your feedback in advance.