Ipod not being recognized by windows computer

I have a video Ipod and a older nonclick wheel type Ipod. Neither one will connect to my computer. Although last week they connected without any problem. Also my wife's Ipod mini connects correctly. I've uninstalled Itunes and reinstalled it. I reinstalled the drivers for the 'Mass storage usb device' in the device manager. I've reset my Ipods.What should I do next?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Similar Messages

  • IPod not being "recognized" by Windows XP

    So I just got my 30GB iPod Video and I installed all the software and stuff. I hooked the USB cable up, but each time windows says "USB Device not Recognized". I looked at the message and it says something about a driver not being installed for the device. If anyone could help me I would love it!!! I've done EVERYTHING!!!

    I hope this will help. I had installed my 5th Gen. 30 Gig iPod on my computer which originally only had 1.1 USB ports on it at that time, and it did sync and work, but I wanted to be able to sync faster. So, I had a 2.0 USB card installed. This card would not recognize my iPod at all. I reinstalled iTunes and iPod software thinking that would help, but nothing helped the 2.0 card simply would not work with the iPod.
    So, I went to the iPod search site and did a search to find approved 2.0 usb cards. That yeilded several pages of approved USB cards. I took this list to my computer guru, they ordered me one of the approved cards, took out the first "generic usb 2.0" card they had installed and put in the new on. Guess what, it immediately worked when I plugged in my iPod!!! It copied 59.2 minutes worth of music to the iPod in less than 10 seconds! I am amazed how much faster it is.
    I say all of this to say that your computer's USB card may not be compatible with your iPod. If not, change out the card with one that is. I hope you will have the same success I had. What a difference it makes! Good luck.
    Dell Dimension 4300   Windows XP   5th Generation 30gig iPod

  • Malfunctioning iPod, not being recognized by the computer. Why?

    Ok, yesterday I wanted to update my iPod so I plugged it in and I got an error message about my USB malfunctioning and then my ipod was frozen on "do not disconnect". I unfroze it and tried again. Same thing. Then I changed ports and same problem. I kept unfreezing and got rid of the songs I added thinking they might be messing it up. I plugged it in and I thought it was fine. When I checked it the next day when I wanted to use it all my songs were gone. I plugged it back in, restored the iPod settings and it still doesn't recognize it. Its telling me "iTunes cannot read the contents of the iPod '__ iPod'. Go to the summary tab in iPod preferences to restore settings it the factory settings." It won't let me restore, though because of an unknown error. What is the problem and how do I fix it?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • Ipod not being recognized in windows xp

    I have a 2nd gen ipod touch that cannot be recognized by my pc or itunes ive tried pretty  much everything down to formating my computer to fix this problem i would like to know were to find ipod drivers if possible. im about to snap my ipod sence its pretty much no use to me anymore because of this any help?

    Hi imma_dr_pepper,
    Did you tried to connect you iPod in DFU mode? You can achieve this by first turning off you iPod, and then pressing the Home-button and the powerbutton at the same time, while it is connected to you PC. iTunes will now show a message that an iPod has been detected in DFU mode. Then try to restore you iPod with iTunes. Hope this will help you.

  • My 4th generation ipod touch is not being recognized on my computer ?

    My 4th generation ipod touch is not being recognized on my computer what do i do ?

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • HT1510 My iPod shuffle is not being recognized by my computer. I have the original USB cord but when I plug it into my computer there is no recognition. The first time I plugged it in it recognized but never again.

    My iPod shuffle is not being recognized by my computer. It is flashing orange and when plugged in with the original USB cable nothing happens to show the computer recognizes it.

    Flashing orange usually means it is being recognized by the computer.  The flashing means do not disconnected, because the shuffle's "disk" is mounted.
    In iTunes (with the shuffle connected), when you look in the sidebar (left side of window), under DEVICES, the iPod is not shown there?  Does it say DEVICES in the sidebar?

  • My iPod is stuck on the Apple logo and won't do anything! It won't turn on, doesn't give me the option to power it off, and to top it all off, it's not being recognized by my computer OR by iTunes when I plug it into my computer.

    So yeah...last night I was checking out my iPod (bored at the in-laws) and all of a sudden the screen went blank and the only thing I can get it to do is have the black screen w/ the white apple logo on it. It won't turn on, doesn't give the the option to power down, it won't charge, AND it's NOT being recognized when I plug it into my computer. Not by iTunes OR my computer. I've tried holding down the top button and the home button at the same time...nothing. And since it's not being recognized on my computer, I cannot restart it or go back to factory settings. Someone please help! I've had it for 18 months so the warranty is no longer valid and I don't know how to fix it. THANK YOU in advance!

    - I would try placing the iPod in recovery mode and then see if iTunes will see the iPod.  try both with the iPod not connected to the computer and with it connect. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next see if placing the the iPod in DFU mode will make it visible
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My ipod nano, 4th generation, is not being recognized by my computer or itunes

    my ipod nano, 4th generation, is not being recognized by my computer or itunes, what do i do? I've tried using different cords, but nothing will pick it up.

    I am experiencing the same issue.  I have Mavericks with updated iTunes, reset both, not detected

  • I have a 2006 ipod not being recognized by the latest version of itunes. Any solutions?

    I have a 2006 ipod not being recognized by the latest version of itunes. Any solutions?
    I can see and listen to all of my music from the ipod on my stereo or thru headphones but for some reason, itunes doesn't see this device.

    Hi sunsets123,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps that may help if iTunes is not recognizing your iPod classic:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • My nano is not being recognized by my computer or itunes. What do I do? I connected to a computer at work to charge and an N20 snowfox was on the screen why i tried to use it. What to do?

    N20 snowfox (4A0432)
    Voltage: 3254 mV
    The above message is showing on my nano screen and it's not being recognized by my computer or itunes. What do I do?

    just hold down the “-” button and the power button. when it says “ok to disconnect” hold down the powerbutton and the “-” button again.
    copied from iPod nano 6G diagnostic mode

  • 2nd iPod not being recognized under devices

    3rd try! Sorry if it posts a number of times but it keeps saying can't post without a message.
    I have two iPod touch and two iPad2. I got the second iPod touch before the iPads. When I plug it in to sync ( all are on my account), iTunes lists the I
    Pod's name. But it always syncs to my iPod one unless I spend 30 min manually syncing.I don't have this problem with the two iPads. Tonight, I noticed on the computer that iTunes says it is supporting three devices not four, any thoughts on how to fix this? I am actually not wanting to sync the second iPod because it is so frustrating.

    Thanks,
    One is called Kimberly's iPod the other is Jenae's iPod. Jenae's iPod is the one not being recognized by the computer and has to keep being manually fixed, it won't sync automatically. Should I still try changing the name on iTunes and assume it didn't pick it up the first time.

  • Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face.

    Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
    Any ideas?

    Did you already have a look at this article?
    iOS: Device recognized in iTunes for Mac OS X

  • My iPad is not being recognized by the computer, therefore, cannot sync.  It charges when plugged to the wall, but not when pugged to iMac.

    My iPad is not being recognized by the computer, therefore, cannot sync.  It charges when plugged to the wall, but not when pugged to iMac.

    Most common culprits include the cable. Try swapping it out for a different one.. or not having the most recent version of itunes. I once even solved this problem by shutting down the computer for 2 minutes. (the longer the better), with the ipad plugged in. starting it up... then itunes recognizes it, launches, and syncs.
    Apple has a troubleshooting assistant on this topic:
    http://www.apple.com/support/ipad/assistant/itunes/
    It will advise you to reboot. I recommend shutting down instead.
    --Sam
    P.S The ipad should charge when asleep and plugged into your Mac. The charging behavior is normal. There isn't enough power out the USB ports to charge the ipad while it is on on some older Macs and nearly all PCs.

  • Ipod nano 3rd gen. is not being recognized by my computer or itunes, it comes up as a USB drive, the cable is fine

    My ipod nano is not being recognized in iTunes or in Windows, it only shows up as a USB and when i plug it in it says 'do not disconnect'
    This happened after I put the ipod nano in Philips Ipod speakers.
    I've reset the ipod mulitple times, uninstalled and reinstalled itunes, restarted my computer, and I can't restore the ipod because it doesnt register on my computer and it doesn't show up in itunes, but for some reason it still says dont disconnect.
    What should I do??

    just hold down the “-” button and the power button. when it says “ok to disconnect” hold down the powerbutton and the “-” button again.
    copied from iPod nano 6G diagnostic mode

  • My iPOD is not being recognized by my computer.....

    I have a 30GB white iPOD. It charges and everything. Nothing seems to be wrong with it. My computer can't recognized it. I can't load/unload songs beacuse of this. I have 2 2GB nanos (the new ones) that work fine. What do I do?

    You know, my new ipod (The 30 GB) was also not being recognized by my laptop and wasn't even charging.
    I think I finally figured out that the usb cord in my laptop didn't have enough power and now I am using my brothers desktop and it seems to work finally.
    HOWEVER, now that it didn't charge successfully the first time for a few hours like recommended and I was playing around with it to make it work, I am afraid that my battery is all messed up.
    When I thought I was charging it, it really was using up the battery. And there were times my computer would freeze in the middle of the process so I would have to restart my computer
    Would anyone know if my ipod will be ok?

Maybe you are looking for

  • Report on Contract qty vs. PO Qty

    Good Morning! I am in need of getting a report out of SAP that shows the original contract qty and the revised qty of the contract.  My client at times may change the contract in order to create the PO for a larger qty than the original contract stat

  • Access denied in my code - Error code:-2147467259

    Hi there, I'm a newbie with CR server technology. I installed yesterday a CR XI trial on my system to do a PoC for a customer who already uses CR. He gave me a rpt file to use in my program. I'm developing a program where the report is prepared as PD

  • IMessage and Facetime issues after upgrading to iOS 8

    My husband has a Mac-book pro, and I have an iPhone 5C and an iPad (with retina display). I just upgraded my phone and iPad to ios8. Before, my husband and I were able to send messages back and forth with iMessage and he was able to call me on Faceti

  • Eq settings on a first generation 10 GB ipod

    How do I turn the EQ setting on and how do I turn the Bass Boster on, on my 1st generation ipod?

  • I got following erro message in Apache error log file

    Why mod_plsql is not started while trying to use Oracle Apex I got connection error as below into modplsql log file <106296140 ms>[ReqStartTime: 11/Sep/2007:14:48:50] <106296140 ms>Request ID ReqID:5160_1189536530 <106296140 ms>Connecting to database