Ipod not being recognized/freezing when connected to computer

Hey all
My Photo Ipod has stopped syncing with my computer. When I plug it into the firewire cable it just freezes on whatever screen it is on and doesnt appear in Itunes, or under My Computer. I have tried resetting the Ipod while it is connected to the computer, it gets so far as the apple screen and then locks up and stays on that screen till I unplug it. I know the issue is not the dock connector, because it works just fine when I plug it into my FM Transmittor in the car. Any help would be appreciatted.
Thanks

Have a read
http://discussions.apple.com/thread.jspa?messageID=2001071#2001071

Similar Messages

  • IPod Classic 80 GB Freezes when connecting to Computer

    Hi.
    My iPod Classic 80 GB Freezes when connecting to my computer (Vista... yes... I know). I've got my iPod for over a year now and I've never had real trouble with it.
    When I plug it in (iTunes already running) my computer gives me the 'thumbthumb' noise because an USB thingamajib is connected to the computer. At this moment my iPod freezes and stays on. iTunes doesn't seem to find my pod. When I disconnect my iPod, it'll stay on (doesn't go energy safe mode) and stays frozen until the battery is empty. But by then, I've already lost my playing info (Which I really value).
    Pllllllease help me out her.

    Someone has finally found a solution to this problem and i decided that i would spread the word around ... so here are the steps:
    1) Quit iTunes.
    2) Delete iTunes from your Applications folder.
    3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.
    4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".
    6) Go to <http://support.apple.com/downloads/iTunes8_21> and download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the diskimage and run the installer.
    You should now be able to run iTunes 8.2.1 again.
    And your iTunes will restore to before you upgraded and you won't lose anything.
    *If you download the iTunes file from the "support.apple" link, and you can't open it, go to http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/ and download "iTunes 8.2 for Windows: iTunesSetup.exe
    WhittWhitt

  • IPod not being recognized by iTunes or My Computer

    When I plug my iPod into my computer, it begins to charge, but iTunes doesn't recognize it and neither does My Computer.
    I have tried it on multiple computers and multiple USB cords, all with the same result. Also, when someone else plugged their iPod nano into it, the computer recognized it fine. Thus, I know the problem is with my iPod. I tried the only 4 of the 5 R's that I could try, with no result. I have also tried authorizing my computer and resetting the settings on my iPod. Again, there was no result.
    Any suggestions?
    5th generation 30GB iPod w/video   Windows XP   iTunes version - 7.0

    Try forcing it into disk mode (http://docs.info.apple.com/article.html?artnum=93651) then try to Restore it in iTunes.

  • I have a 2006 ipod not being recognized by the latest version of itunes. Any solutions?

    I have a 2006 ipod not being recognized by the latest version of itunes. Any solutions?
    I can see and listen to all of my music from the ipod on my stereo or thru headphones but for some reason, itunes doesn't see this device.

    Hi sunsets123,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps that may help if iTunes is not recognizing your iPod classic:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • My toshiba external hard drive is not being recognized, except when I eject it. I have the preferences checked to show icon and have checked utilities folder. nothing. Help!

    I have a iMac, Yosemite 10.10 and my toshiba external hard drive is not being recognized, except when I eject it!. I have the preferences checked to show icons and have looked in the utilities folder..nothing. I have also changed ports. ??

    A few things to try:
    1-Repair permissions and restart your computer.
    2-Zap the PRAM
    3-Use Software Update/App Store to update your OS to OS 10.10.3.  Also, update everything SU/AS has to offer for your computer.  When done, repair permissions and restart your computer. 

  • HELP: ipod not being recognized

    I am using Windows XP and I recently downloaded the new iTunes 7. Now my ipod is not being recogized. When i plug it in, it charges, but a little icon appears on the bottom saying..."One of the USB devices attached to this computer has malfunctioned, and Windows does not recogize it." Below that is a list of "Unused ports" but the one that is bolded, and I'm being told is being used, is an "Unknown Device."
    Any help would be greatly appreciated. Thanks!

    I have no idea what Dell or Apple told you, so we'll start from the beginning.
    First read this: http://docs.info.apple.com/article.html?artnum=305136 I am assuming since you talked to Dell your USB Driver is up-to-date. Reload your USB Driver anyway follwing the steps in this article.
    Next disconnect any USB Device you have connected other than your keyboard and mouse.
    Connect your iPod to a USB port on the rear of your computer and see if your computer can recognize it. If it can, right click on the iPod and change the driver letter to a higher letter (M or P) and then reformat your iPod (FAT32 format).
    If iTunes can now see your iPod, Restore it.

  • 2nd iPod not being recognized under devices

    3rd try! Sorry if it posts a number of times but it keeps saying can't post without a message.
    I have two iPod touch and two iPad2. I got the second iPod touch before the iPads. When I plug it in to sync ( all are on my account), iTunes lists the I
    Pod's name. But it always syncs to my iPod one unless I spend 30 min manually syncing.I don't have this problem with the two iPads. Tonight, I noticed on the computer that iTunes says it is supporting three devices not four, any thoughts on how to fix this? I am actually not wanting to sync the second iPod because it is so frustrating.

    Thanks,
    One is called Kimberly's iPod the other is Jenae's iPod. Jenae's iPod is the one not being recognized by the computer and has to keep being manually fixed, it won't sync automatically. Should I still try changing the name on iTunes and assume it didn't pick it up the first time.

  • Ipod not being recognized on the system, not getting reset,retry,restore,..

    hi all
    my ipod is not being recognized on the system..
    i dont know wat is the problem
    i tried the 5 Rs thing and i didn't get any king of result..
    i dont know wat to do
    please someone who could find a solution for this please reply and send me the solutions
    thanks..
    bye.

    See this...
    Windows Does Not Recognize iPod
    btabz

  • 5th generation IPOD not being recognized by my Macbook

    I recently purchased an Ipod Touch and it works fine. Now my 5th gen video Ipod is not being recognized by my macbook. I've tried it all restart, disk mode, checked the cable, switchd the port but nothing seems to help. It just does not appear on my macbook it will charge on a home or car charger but not through my mac book as if it doesn't exist!!
    Please help Thank you

    What have you tried so far in terms of troubleshooting? Did he give you the cable that was originally included witht the Shuffle? I ask because if you are using a 3G/4G cable it will not work with the 2G Shuffle.
    Have you worked through all the sugguestions here as necessary?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • 3G iPod not being recognized on Mac OS 10.4.6

    Hello, I am asking if anyone knows/has had a problem with the 3G iPods not beign recognized by iTunes or Finder. This is an all of the sudden problem and has caught me by surprise. I have done the "R's" Apple suggest and still nothing. Could it be time to get a new one? If you know how I can fix thsi or has suggestiosn besides any of apples I am willign to try it.

    O, I am sorry for the wrong position for this topic. Although this topic should end because I figured out the problem this morning.
    It was by sheer trial that I tried to use USB cord opposed to the firewireone itried os many times. I dont remember reading anythign about this. Well sorry for misplacement.
    Sorry I kinda answered my own problems.My bad.

  • IPod not being recognised by iTunes or My Computer: How to Fix It

    For anyone whose iPod is not being recognized by "iTunes," and does not show up in "My Computer," but does show up in "Device Manager," and in "Safely Remove Hardware."
    This is a problem with the program DAEMON Tools, which can only get on your computer if you downloaded it. So if you didn't, then this post will probably not help.
    First, uninstall DAEMON Tools. Then, search the computer for the following two drivers:
    dtscsi.sys
    sptd*.sys
    Delete them both. You may need to uninstall, and then reinstall "iTunes." Your iPod should work fine after this.
    Dell Inspiron 600m   Windows XP  

    I'm not certain if you mean you can't find where to download it if you want to have it, or you can't find it to get rid of it, so I'll answer both:
    If you wish to download it (which I do NOT recommend because of issues with spyware, try a program called Alcohol 120% instead) go to
    http://www.daemon-tools.cc/dtcc/download.php
    If you wish to get rid of it, it should be on your list of "Add or Remove Programs," if not, it isn't on your system
    Dell Inspiron 600m   Windows XP  

  • My itouch is not being recognized by itunes or my computer. I have reinstalled itunes but with no results

    a 8 gig ipod touch of my nephew is not being recognized by itunes or my comp

    Assuming you are using a Windows based computer...
    iOS: Device not recognized in iTunes for Windows

  • Ipod freezes when connected to computer and cannot restore

    When I connect my ipod to my computer itunes does not recognise it for a long time, when it does it says the ipod may be corrupted and to do a restore. So I click restore, and the warning message comes up about erasing the songs. I click yes then an error message comes up saying that the resource is not available. When I click eject, the ipod dissapears from the source list but the do no disconnect thing stays on the ipod screen and dosent even flash.
    My ipod has not been recognized by itunes since the latest update, so I uninstalled the ipod driver and this problem has been happening since

    If you look through the forum there appear to thousand of people who have this problem. Here's what we know so far:-
    1. The problem is related to iTunes v7 and the firmware v1.2 on later ipods.
    2. it is a bug in the firmware that gives any/all of the following symptoms
    - freezes after re-set
    - freezes during restore
    - cannot sync
    - cannot eject
    - cannot switch off
    - basically CANNOT USE IPOD AT ALL
    3. the problem appears to have been known to apple for at least a couple of weeks but they have not found a solution and for the time being they have also chosen to not even acknowledge the problem to re-assure users that their hardware is OK and a software fix is on the way.
    4. Contentious posts are being deleted by Apple (I have already had 2 removed so get this one while it's hot)
    keep the pressure up!!!
    They will have to acknowledge it and fix it

  • IPod Not being recognized with all the software updates

    I've been without my iPod for a few weeks now and I desperately want it back. I dropped it a while back, and have come online to look up stuff to restore it, but none of that is working for me. I reset it by pressing "menu" and "Play" at the same time, then put it into disk mode by pressing the "ff" and "rwd" buttons together, but even in disk mode my computer is not recognizing it at all. The iPod screen says that it is in disk mode, and says it's okay to disconnect, but its not giving me the option to restore when I connect it to my computer and open the iPod updater.
    It also gives me the file folder w/ an exclamation point whenever i don't put it into disk mode. And the few times that my computer does pick up something the iPod updater flashes a message that says "Can't Mount iPod" and then the updater manually closes itself. Anyone know what to do?
    Thanks
    20GB with Dock Connector   Windows XP  

    For "Cant mount iPod" - please try the following first
    Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC
    If still cant solve it then
    The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • Ipod not being recognized

    I have an ipod touch second gen. and I downloaded itunes v.10 2 weeks ago I think, and when I plugged my ipod in, it said it was being recognized as a camera and I disconnected it. Now whenever I plug it in, it's not recognized anywhere on my computer. I've tried uninstalling and re-installing itunes and I plugged it in to my brothers computer (he has v.10 too) and it worked? I did a software update hoping it would fix my problem, but still nothing. Help please?

    Connect your ipod. When you go to My Computer and look for Devices with Removal Storage. Do you see your device?
    If not, go to [iPod not recognized and Windows Device Manager is empty|http://support.apple.com/kb/TS1496].
    If it is there go to [iPod not recognized in 'My Computer' and in iTunes for Windows|http://support.apple.com/kb/TS1496]

Maybe you are looking for

  • ITunes 10.3.1.55 on Windows 7 64bit device drivers are not signed

    I have Windows 7 Ultimate and upgraded to iTunes 10.3.1.55.  Now iTunes will not reconize my device. It appears that Apple has incorrectly signed the device drivers and Windows will not install them. Has anyone come up with a solution to this, short

  • Dreamweaver 8 and xml

    Hello excuse I have forgeoten that I was on an english forum ( because I am from france) I would like to know if I can use dreamweaver 8 to modify my web site written into xml I used to create in html so I could work into creative mode or in incoding

  • Manual and shortcuts for SG CC

    hi, can someone please link me to the (hopefully existent) manual of the new SG CC? Some shortcuts have changed. Do you know how to disable only the current layer via keyboard? thanks a lot, Diego

  • Posting from FBCJ to Asset

    Hi All, Please let me know that posting from FBCJ(Cash Journal to Asst directly is possible.when i go to FBCj there is a filed for asset posting from there but when i put asset no. there system gives error massege-Auxiliary account assignt for asset

  • Posting of MIRO transaction with other document type

    Hi Every Body, We want to make MIRO with other document type for some particular transaction , not with RE , we have defined other document type VR , also number range but how to link it in MM part because MM number range same for RE and having provi