Ipod not being recognized in Itunes

Ever since I upgraded to latest Itunes version, but Ipod mini is not recognized in Itunes. I know I've seen other postings, but I've tried everything that has been suggested that nothing seems to work. There is nothing wrong with the Ipod mini or cable as it works on a friends notebook. The Ipod is recognized in Windows, but when I go into Itunes, it does not show up and the Ipod continuously displayed "Do not disconnect". I'm open to any and all suggestions as I feel I have reached a roadblock. Thanks in advance.

I had a similar problem and tried everything it seems, and nothing worked. Then I found a post somewhere that said the problem could be related to the drive letter. I have two hard drives so I thought I'd give it a try.
To change the drive letter for ipod (Windows XP):
1. Right-click My Computer
2. Select "manage"
(Computer Management window opens)
3. Click on Disk Management
4. Right-click the ipod drive
5. Select "Change Drive Letter and Paths..."
6. Click "Change..." button and choose any letter except
F or C

Similar Messages

  • Ipod not being recognized by Itunes, yet appears on desktop.

    Earlier today I had my 80 gb ipod classic plugged into my ancient G4 Powerbook.  Everything was fine until the ipod accidently fell off of my desk.  In falling it had dislatched itself from the usb connection.  I had got the message on my computer screen about the device being removed in the wrong manner. I went through the ipod's menu to see if everything was alright, and low and behold all my songs were gone.  I had decided to plug my Ipod back in the computer.  It showed up on the desktop as usual but when I brought Itunes up it didn't appear in the side panel.  I rebooted my computer and I reset my ipod but to no avail.  I know that all isn't lost because I can still see my songs are on the ipod, yet I can't access them when I have the ipod connected into my computer (The only folders I have access to are Calendars, Contacts, Notes, Photos and Recordings).  As of right now I can still see that 54 out of 80 gbs are available.  I'm at a bit of a standstill in what to do next though.  If I can't save my songs then i'll just have to take the loss but I'm hoping that I can do something.
    Thanks in advance.

    I had a similar problem. My iPod Classic would even launch iTunes when I connected it but it only appeared in the Finder, not in iTunes. I finally found an old Apple Support article that worked for me:
    Delete the iPod.plist file
    Quit iTunes. Delete the following file in the your home directory and open iTunes again.
    ~/Library/Preferences/com.apple.ipod.plist
    After I deleted the plist, I reconnected the iPod, iTunes started automatically, and the iPod was recognized by iTunes and synced.

  • IPod not being recognized by iTunes or Windows XP

    I just got a ipod nano for my birthday and I've been trying to set it up for two days, I've got the latest version of Itunes and I've tried everything I could think of and my Ipod is still not being detected by my computer or iTunes. When I plug it into my usb port, it starts to charge but nothing else happens, can someone please help me?

    To resolve this issue i unistalled Itunes and quicktime, then looked for diffrent USB ports once found I put iPod nano in and re-installed Itunes and quicktime

  • IPod Not Being recognized in iTunes and hangs in iPod Update

    My Shuffler was working fine this morning, then I took it to work and plugged it in a new computer. This time, however, it was not recognized by iTunes. Windows caught it as a USB Mass Storage Device and it shows in My Computer as a Removable Drive. However, it does not show in iTunes and when I open the updater to Restore back to factory install and it hangs saying Initializing...
    Any ideas? I have tried it on another computer with the same result. I reset it and followed many instructions from the support pages. I have uninstalled both iTunes and the iPod software and reinstalled it with the same results. I am out of options and getting ready to send this in for repairs, but I wanted to see if anyone had any ideas. Thanks!
    iPod Shuffler (512 MB)   Windows XP Pro  

    No data on web site concerning this problem and no contact mail available,, I tried the chat but :
    “Our records indicate that you purchased your product on 28-Jul-2005. Based on this data, your product is not eligible for chat or phone support. Get instant chat support by purchasing a support agreement:
    Purchase an AppleCare Protection Plan (APP) 449 DKK (incl. VAT & taxes) (learn more)
    Purchase an AppleCare Support Incident 399 DKK (incl. VAT & taxes) (learn more)
    If this date is incorrect, please update your purchase information. If you’ve purchased APP but haven’t registered it, please register your agreement to activate support.”
    So no information is available to solve this problem and nobody to contact, this is pretty bad service......

  • Ipod not being recognized by itunes--was a few weeks ago--have not done 1.1

    hi. i have not installed the 1.10.2006 update as i've seen lots of people have problems with that on these boards. however, today when i tried to sync my ipod, the usb port did not recognize it was there and itunes was not automatically pulled up. so i could not update my music, nor could i do the new firmware install if i wanted to. those programs are not recgonizing that the ipod is plugged in.
    i've tried to reinstall itunes, that didn't help. tried to get all the windows updates, but ms couldn't verify my os is valid (it totally is). i've reset my ipod several times and would restore it, excpet the updater doesn't recognize it's plugged in. the battery is fully charged.
    i've also had problems with the ipod not turning on or off, or skipping 4+ songs when i try to just skip ahead one.
    not sure what the deal is, and i'd appreciate any help.
    thanks.

    Hi.
    You could try to restore it once more. Do you use the same computer all of the time? Do you manually sync music, or automatically sync?
    I guess you are running Windows, so iTunes could have hidden some files which didn't delete when you first uninstalled. Take a look at this:
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html
    If you do this, after you have re-installed, you could then try the disk mode if it doesn't connect.
    Vic

  • IPod not being recognized by iTunes or My Computer

    When I plug my iPod into my computer, it begins to charge, but iTunes doesn't recognize it and neither does My Computer.
    I have tried it on multiple computers and multiple USB cords, all with the same result. Also, when someone else plugged their iPod nano into it, the computer recognized it fine. Thus, I know the problem is with my iPod. I tried the only 4 of the 5 R's that I could try, with no result. I have also tried authorizing my computer and resetting the settings on my iPod. Again, there was no result.
    Any suggestions?
    5th generation 30GB iPod w/video   Windows XP   iTunes version - 7.0

    Try forcing it into disk mode (http://docs.info.apple.com/article.html?artnum=93651) then try to Restore it in iTunes.

  • 5th Gen iPod Not Being Recognized by iTunes

    5th Gen iPod w/Updater 1.3. iTunes Ver. 7.6.2.9
    Two weeks ago purchased music with no problems; sync'ed library w/iPod w/no problems.
    Purchased music a few days ago- no problems. Started iTunes today to sync iPod and got msg saying registry values missing for certain drivers for burning discs, etc. Cause could be from other programs that burn discs etc.(???)
    Plugged in iPod, got the tone beep and then a message that iTunes doesn't recognize the iPod attached. Disconnect and reattach. Did this several times - still doesn't work. I can play tunes from my iTunes library and my iPod OK - just can't sync them up. Anyone got a solution??
    Thanks, Unicorn39

    Well,after digging into the 1000's of msgs regarding problems similar to mine I found something I thought might help at (http://support.apple.com/kb/TS1538). I teied it and found that my drivers were OK so that wasn't the problem. While trying things I suddenly got the iPod recognized and it started sync'ing. I think the solution to my issue was to connect the iPod first; wait for it to be recognized by the pc (the tone beep) then go thru the acceptance of iTunes agreement, etc., iTunes then opened and the sync process began. I tried it with iTunes open and it won't work. It sounds like a hokey way to do it but at least I have my library and iPod in sync.
    My next problem to work on is there seems to be registry problem with iTunes drivers for importing and burning CD's. Got to figure that out and fix.
    Since I do have CopyTrans I may just re-install a back-level of iTunes and copy my iPod into the new iTunes library.
    Unicorn39

  • Ipod not being recognized in Itunes on Mac, i restored it on PC because i couldnt get it to restore on my Mac

         I just bought an Ipod Classic 160gb 2 days ago. I first hooked it up to my mac and it synced all 2000 songs and played fine. I ejected it but unplugged it before the ipod said it was done. It was my fault, i thought it was like the iphone where you just click the eject button and unplug. So I dont think anything about it until today when i went to try and sync it again to add some movies. It gave me an error and it wouldnt sync. Im not sure on the exact thing it said. So i proceeded to try and restore it, thinking something was wrong. I starting restoring it and it gave me an error saying "The iPod could not be restored, unknown error (1433) occurred.
         So i take it to my PC thinking that if i restore it there, i can just hook it back up to my mac and add my music back. I plug it in the PC and it tells me that i do need to restore because it is corrupted. So i restored, everything fine. I even added a song to it from my PC just to see if it would work. So i go to plug it in to my Mac and Itunes doesnt recognize it, it does nothing. The ipod did come up however on my desktop, but not as the usual black ipod, it came up as a white hard drive. So the Mac is now seeing it as a hard drive and not a Ipod????
    I have no clue what ive done here, do i need to just take it back and get a different one or what? any help would be appreciated.
    Ive also tried restarting the ipod and restarting my computer, nothing works.

    Connect it to the Mac, if iTunes launch, close it back.
    Use Disk Utility, select the iPod
    Click the First Aid tab
    Click the Repair
    Eject the iPod
    Disconnect the cable.
    Connect back the iPod and wait for iTunes to launch.
    Restore your iPod.
    Good Luck!

  • IPOD not being recognized by itunes

    When I attach my IPOD suddenly I get a page that identifies my IPOD and has a check mark to syncronize it, but I already have all my music from ITUNES on it. when I uncheck it, the IPOD drops off

    i don't see the answer

  • Why isn't my iPod 6th generation not being recognized by iTunes?

    Why isn't my iPod 6th generation not being recognized by iTunes?

    Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

  • TS3716 ipod nano is not being recognized by iTunes.

    My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
    Any suggestions?

    Does the iPod work OK?
    Have you tied resetting the iPod? Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Next would be to place the iPod in recovery mode and then restore via iTunes.  If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • HT1369 Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed and mobile programs associated with my non apple cellpho

    Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.

    I had this problem too and my roommate solved it!
    Go to 'Settings'
    'Music'
    Scroll to the bottom and enter your password to log onto your home sharing
    Then connect to iTunes and sync!

  • My Ipod 7th gen is not being recognized by itunes and Windows 8.1.

    Hello. My ipod 7th gen is not being recognized by itunes and Windows 8.1. When I connect my ipod to my computer, itunes will open automatically and a message bar below will appear:
    I have followed all the instruction in the support and itunes still unable to deted my ipod. The funny thing is, if i uninstall itunes, Windows 8.1. will detect my ipod but when itunes is installed, both itunes and windows 8.1. cannot detect my ipod. Thank you in advance for all your help.

    the message box says like this:
    An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again.

  • My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

    My Ihone 4s is not being recognized by Itunes.There seems to be  no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

    Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
    Thanks

    Hi, jodie_0182.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the above step does not resolve the issue, try all remaining steps in the article. 
    Cheers,
    Jason H.

Maybe you are looking for

  • How can I turn off the DEP for adobe acrobat standard 8

    Hi all, I tried in the settings to add the adobe acrobat standard 8 for exception for DEP, but it doesn't work. I am using Windows Vista system, and the error message accured just few weeks ago, in the past I was always able to use Adobe Acrobat Stan

  • Upgrading from CR 8.5 to CR 2008, along with Oracle DB from 9 to 11G

    We currently use Crystal Reports 8.5, yeah its ancient, but suited our needs.  Our web guys upgraded our server to oracle 11g R2, and now we have lil issues with the changes and how the old CR works.  So figured it was time to upgrade it as well.  My

  • WLS 7.0 sp2 - Servlet Problems with SOAP messages

              I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped           XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's           support of JAXM? The System.out.println's indicate I hav

  • "Please Wait" message

    Good afternoon, I have setup the javascript to display a clock icon with "...Working..." displayed while long processes are running when a button is pressed. What I need to do now is to define a link in a report column, initializing values from colum

  • Active / Inactive Users on Shared Services

    Hi All, I have been trying to migrate Hyperion Shared Services 9.3.1 to 9.3.3 Now, once the migration has been successful, I try to log back using the Native User credentials. However, it fails, and I log in as an MSAD user. Now, once logged inside,