Ipod not connecting to computor or itunes

Hi everyone,
My ipod used to work fine but now it wont connect to the computor or even to its charger. i tried with a different computor and it still didnt work. Anybody got any suggestions on how to get it working again? I would appritiate it.
thanks.

Hello Miyu 18, I to am having the same problem with my iPod nano. It was working fine yesturday and this morning it won't turn on nor will it show up on "my computer" or iTunes. I was going to restore my initial manufacture settings but I can't do that if it won't turn on. Keep me posted if you find a resolution and I'll let you know as well.
Thanks everyone for your help!

Similar Messages

  • Ipod not connecting to windows or iTunes!

    My iPod isn't being recognised by the computer, but when I disconnect it it lights up.. So it thinks somethings happening. Also, a seperate iPod works fine on a different logon to mine. My iPod is over a year old, could this be caused by the battery?

    Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various solutions that you can try to correct your problem. One should work.
    First, make sure that the iPod is fully charged.
    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
    Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
    Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
    If your iPod shows up in Explorer under 'my computer' try changing the drive letter: Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management. Right-Click on the iPod and select “change drive letter”. Choose something further along in the alphabet that is unused. Usually, “M”, “N”, “O” (or something similar).
    If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
    Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
    Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows”
    If all else fails, there have been some successes using the information in this post below. WARNING: I have absolutely no clue to what this download file does, and introducing it into your PC environment is risky. Some Forum posters have experienced less than benign results. Proceed at you own risk.
    http://discussions.apple.com/message.jspa?messageID=1222335#1222335

  • Ipod not connecting after upgrade to itunes 8

    After upgrading to itunes 8 my ipod (nano) will no longer connect to my computer and is not recognised by itunes. When I connect the ipod I get the windows 'install new hardware wizard' running but however I try to work through this I get nowhere. Looking at Device Manager in Windows says there are no drivers for the ipod - it has a little exclamation mark next to it.
    My wifes brand new ipod will also not connect and its straight out of the box.
    Not at all sure what to do next. The support pages don't seem to cover getting the install new hardware wizard. Any help or advice please!.

    Ben888
    Having reported this to my dealer, and them agreeing to supply a new lead to try, I had one final attempt at resetting the iPod.
    Having restored, reset and updated the iPod half a dozen times before without success, a reset as described here:
    http://www.apple.com/uk/support/ipod/five_rs/classic/
    worked and it is now merrily playing again in the car with the original lead.
    It would seem that Apple have developed another piece of spectacularly temperamental equipment........and people slate Microsoft!
    Hope it works for you as well!
    Message was edited by: petejigsaw
    Message was edited by: petejigsaw

  • My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    tmplHi pranoop,
    If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Ipod is not connect to windows or itunes but it still shows up on ipod

    i had to re set my ipod the other day and ever since then it will NOT connect to windows of itunes but every time it shows up on the ipod that it is connected!

    Welcome to the discussions,
    try again to reset by holding the sleep and home button until the Apple logo comes up again. If still no luck, restore "as new ipod"
    Restoring: http://support.apple.com/kb/HT1414

  • Get could not connect this Iphone to itunes because of unknown error (0xE8000065), but I am trying to connect and Ipod touch.  Anyone know what that error means?

    Get could not connect this Iphone to itunes because of unknow error (0xE8000065) when trying to connect an ipod touch to itunes.  Anyone know what this message means?

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • How to unlock ipod not connected will not connect to itunes

    how to unlock ipod not connecting to itunes

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT4972 ipod not connecting to itunes

    ipod not connecting to itunes

    another method that could work is turn off computer and turn it back on
    usually works for me

  • ITouch not connecting to windows or itunes, and will not charge.

    Okay, so, I was charging my iTouch one day in my computer, and every time I plug it in, iTunes launches and then starts to automatically sync my iTouch, which I DO NOT WANT. Anyways, I quit the sync from itunes as I always do, but this time, when I tried to quit, nothing happened and itunes froze up. 1 Ctrl+Alt+Dlt later, I tried to end the program, it was being pesky so I had to try and end it a few times. My iTouch finished charging and I hane not thought anything of it since then. The day after that, I was trying to charge my iTouch before work, and I went to get ready while it was charging. I came back to an iTouch that was not charged at all. It does not connect to Windows or iTunes, but still for some reason retains enough battery to display the battery symbol. I have used the iTunes helper to try and guide me through the problem, but the steps I took did not fix the problem and I do not feel like taking my iTouch in to get serviced. So, in overview, my iTouch will not charge, connect to windows or iTunes, all after I ended iTunes from the task manager. My iTunes works just fine, my iTouch is the problem. I dont know what operating system it is running on, and I dont know how to update it, but it is at least 4.3.1.
    P.S. I would love to get some speedy help on this. If its any reward, you have many internets up for grabs for answering my question. Over 9000 ^_^

    - Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try placing the iPOd in recovery mode to see if that will make the iPod visible in iTunes so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My ipod not connect with i tunes

    my ipod not connect with i tunes

    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • I plugged in my iphone to restore it but while restoring itunes shutdown itself . if my iphone is not connected to the mac itune works but when i connect my iphone to my mac itunes does not open at all.

    i plugged in my iphone to restore it but while restoring itunes shutdown itself . if my iphone is not connected to the mac itune works but when i connect my iphone to my mac itunes does not open at all.

    Hi Arjun sache,
    Welcome to Apple Support Communities.
    It sounds like you're seeing an issue with iTunes shutting down unexpectedly when your iPhone is connected to the Mac. Take a look at the article below, it provides a lot of great troubleshooting tips that may be able to resolve the issue for you.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    I hope this helps.
    -Jason

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • HT4623 I just got an iPhone 4, and I can not connect it with my iTunes. I tried to set up a new iTunes account but it says that my security code is wrong, even when everything is correct. What should I do?

    I just got an iPhone 4s, and I can not connect it with my iTunes from my previous account. I have already tried making another account, however it says that I have the wrong security code even though this is not true. What should I do?

    Contact iTunes support.  There's a link to it on the bottom of every page in the iTunes store.

  • Everytime I want to remote my itunes from my iphone, itunes search for radio-stream updates. I often use remote when I'm not connected to Internet so itunes tell me that I should connect to Internet. This is new since 10.5. Can I turn this off?

    Everytime I want to remote my itunes from my iphone, itunes search for radio-stream updates. I often use remote when I'm not connected to Internet so itunes tell me that I should connect because the radio-stream update can't be made. This is new since 10.5. Can I turn off the search for Radio-Stream or does someone else has an Idea how to fix the problem?

    weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
    how weird is that?
    oh well JG - maybe you mixed a magic potion for me?
    anyway, thank you for all the help.
    to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
    cheers
    P

  • Could not connect to " home shared iTunes library name "

    I'm having an issue with iTunes/ Apple TV. Actually it has been ongoing. I have a particular iTunes library shared on a private subnet (together with the Apple TVs) from a Mac Mini. I can connect and play content any time with iTunes on another computer 100% reliably. But around 60% of the time when I try to connect to it from any of my four Apple TV (2's) an error comes up saying "Could not connect to "<home shared iTunes library name>" ", "Make sure the computer is on the same network as your Apple TV. the iTunes version is up to date and iTunes is running". The answer to those questions (as always with such messages is obviously 'yes':
    Yes of course we are on the same network. If I wasn't, the library wouldn't have even shown up in the first place before selecting it
    Yes iTunes as always is the latest version thanks to Mac Software Update
    Again 'dah'. See response #1
    If I restart the offending iTunes library the error is resolved (although sometimes it does require reboot of the Apple TV) but could reappear as early as within the next 24 hours. This issue has been occuring for a very long time however appears to be increasing in frequency. It occured as well on the Apple TV (v1).
    Anyone with clues on what's going on here?
    Thanks
    Greg

    I agree that the first debug point should be the network. Though like Greg, I use a Mac Mini to serve up movies to a couple of Apple TVs. From the 'problem' Apple TV, I could see other iTunes movie libraries on other Mac(s), and those would work/play fine. It's only when I try to connect to the iTunes Library of the Mac Mini that I have this issue. It's almost like it's asleep, and doesn't respond. Though I can mount the library folder, and play movies from other Macs w/o a problem while the Apple TV still has the problem.
    As Greg mentions, closing and re-opening iTunes on the Mini solves the issue (though only temporarily).
    The only difference that I have (non-consistency) is that my Mac Mini is an older model, and cannot be upgraded to run Lion (10.7.x) like my other Macs. The Mini is running 10.6.8, and iTunes 10.6.1 (32-bit). My Macs are running 10.7.3 and the 64-bit version of iTunes 10.6.1.
    Is it possible it could be a 10.6 vs. a 10.7 issue? Greg, which version of OS X are your Macs running?

Maybe you are looking for

  • Problem in creation of sales order using BAPI

    Hi Guru's,               I am currently working on Minimum Order Value problem. If the ordered item is less than 5$, the requirement is to add a new material MOV to the existing order by filling the difference amount and making it to 5 pounds. I am u

  • Can't open Reader documents

    On a MAC. Am trying unsuccessfully to open Adobe Reader, getting following message "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser." HALP!

  • How to pass security context in

    Hi, I am running BIP reports (Enterprise Edition) against application that requires a VPD context to be set up. How do I do this - is there anything like a LOGIN TRIGGER in BIP. I know that I can use a beforeReport trigger - however, I have a set of

  • How to export report to excel and to text file in previewer

    How to export report to excel? And, it takes long time for generate report to rtf or pdf file in previewer. How to speed up the process? or, it's better generate report to text file directly by Run_product? Please help!

  • How to call a link in jsp

    hello, i have some link saved in w="www.yahoo.com" w is saved in some table which contains many links doing it like this out.println("<a href=< www.yahoo.com >yahoo</a>"); make it fixed and i can't change the web page address which is readed from som