IPod not crossing platforms

Hello. I have a 30 GB iPod (black) and I just ran the iPod updater from 6/28/06. My iPod says it is running version 1.1.2. It is Model MA146LL.
I had three big surprises in doing that update. The first one was when I updated iTunes on my iBook. It stopped recognizing the iPod immediately and wanted me to run the iPod update.
Yeah, well, I've done that before. I ran this update, and it wanted me to reset the iPod to factory settings. Well, like any good iPod user all my data in on my hard drives and not from some pirate source, so resetting to get an iPod update is not a crippler.
Well, I updated my iPod and got surprise #2: it now plays video podcasts, which is REALLY cool. And since I carry the iPod between my home station and my much faster-connected work station at work (the latter is a PC), I figured I was about to be a complete video idiot for the next 2 weeks.
When I got to work this morning, my PC wanted me to update iTunes, which made sense to me since the new update was out there. I did that, and I plugged in my iPod. The PC knew I plugged in my iPod, but it said I needed to download the new iPod update -- which is annoying, but fine. I downloaded, ran the updater, restarted, and plugged in my iPod.
Now the PC wants me to reboot the iPod to format it for Windows. On Friday, I could use my iPod on either my PC or my iBook and not have to worry about something like this. Today, by dilligently running my updaters, I am boxed out of using my iPod across platforms.
All those funny new Mac commercials just stopped being so funny. My iPod doesn't work the way it ought to work -- the way it worked up until Friday.
Any help available?
Dell Laptop Windows XP Also iBook running OS 10.4.6? Latest OS update

An iPod formatted on a PC, can be read both by a PC and a Mac. But not the other way round, a Mac iPod cant be read on a PC. Therefore, go and do a Restore for your iPod on your PC with latest version of iPod updater and make sure you have the latest version of iTunes on both computers.

Similar Messages

Exchange tasks and to-dos and cross platform continuity

When one creates a task on the PC with the shortcut to create a task it gets created as a to-do and not in the tasks folder or the exchange account. All other devices only look at the tasks folder so tasks are not cross platform.
Ctnl-shift-K is create new task. So why does it only show in the PC to do list and not the task list. It does not then show in the task list
on my mac or other devices. Whoever had a hand in the task and to do set up had no idea of continuity between apps, naming and functions.
Creating a task in the mac environment (too many keystrokes) will create a task but it will often show on my PC in the to-do list but not on the Mac task list on which it was created.
Does anyone have any great answers or solutions? HELP!!!!!!

Since there's no evidence in your post that any of this has anything to do with an Exchange server, I recommend that you post this in the Outlook Forum:
http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Grid Control for a cross-platform migration

Is it possible to use Enterprise Manager Grid Control to execute a cross-platform migration? A co-worker suggested checking this out, but he wasn't sure if it would work or not.

Cross-Platform transportation is a complex process and done by RMAN utility. Don't rely on GridControl, better follow the roadmap in
http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm#sthref1379
Werner

Cross platform CS on PC to CS3 on Mac does not work like video says

Your video on cross platform workflow states that you can import older Premier CS files on a PC into CS3 on a Mac. I tried this and get the message, "this project was saved in a aversion prior to Adobe Premiere Pro CS3 and cannot be opened on a Mac. Please refer to the User Guide for import options." I guess I have to assume then that the video, www.adobe.com/go/vid0236, is wrong about this? Can someone please explain how I can salvage the work I did 3 years ago on Premiere Pro 1 on a PC when I am now exclusively working on the Mac in CS3?
Thank you.

Ty,
This has come up a few times and the solution is to find a PC CS3 user, who will Open the Project and then Save it in CS3-CS4 for you. I does mean that you'll have to befriend a PC-person, but who knows, maybe you can reciprocate later on. In each previous instance, this workflow, PC to PC to Mac worked perfectly. Note: the same holds for Encore Projects, and there is some PC to PC incompatibilities between very early versions and later versions. I had to Open and Save an Enocre 1.0 Project in CS2, so a CS4 (only) user could then Open in CS4. This stuff happens, and the skip in Mac porting can play a role in it. If I had CS3 on my PC's, I'd do it for you, but CS2 will not hlep you.
I believe that P 6.5 was the last previous version ported for the Mac, until CS3.
Good luck,
Hunt

Email images and signatures not displaying cross platform??

I have noticed something odd when emailing people who are using windows. For some reason, attachments and signatures that are images (.jpg files that WILL open in a browser on the PC) or PDF's do not show up in the body of the email I send to them. Yet they are using HTML email, and emails they send to ME do have images showing up correctly in both the body of the email and the signatures on my Mac. Is there something on my end that I need to do in the formating to make this cross platform? Has anyone else run into this?
I'm confused, I thought HTML was HTML....

Same here... in Outlook 2007 many times the Mac email signature ends up as an HTM attachment... Any news on this odd behavior!

Cross Platform migration AIX to linux (ERROR IN CONVERSION ORA-19994: Message 19994 not found)

I am performing a cross platform migration aix to Linux from release 11.2.0.2 to 11.2.0.4. I am using this doc
Reduce Transportable Tablespace Downtime using Cross Platform Incremental Backup (Doc ID 1389592.1).
I am using the db_file_transer method and I have hit this error
Error:
/home/oracle/local/db_convert/dest_rman/xxttconv_i3q0t1ha_1_1_4.sql execution failed
ERROR IN CONVERSION ORA-19994: Message 19994 not found; product=RDBMS;
facility=ORA
ORA-19600: input file is backup piece
(/oraback/nfclpat1/i2q0t1ha_1_1)
ORA-19601: output file is backup piece
(/oraback/nfclpat1_tmp/xib_i2q0t1ha_1_1_5_28)
CONVERTED BACKUP PIECE/oraback/nfclpat1_tmp/xib_i2q0t1ha_1_1_5_28
PL/SQL procedure successfully completed.
I have searched and do not have anything to go on.
Can anyone who has seen this give me some direction?

As per Oracle documentation on given error code, Please see if following action helps.
ORA-19994: cross-platform backup of compressed backups to different endianess is not supported
Cause: A cross-platform backup was requested for a compressed backup to a different endianess from the current platform.
Action: Do not specify a compressed backup or specify the same endian platform.

Does anyone have issues sending pdf's or jpg's cross platform and the images do not come through as an attachment. iMac OS 10.8.2

Issues with mailk.
When I send an attachment, if I drag n drop or actualy use attach. When it is sent cross platform, especially outlook. The person says the image is embedded in email. I tell them to right click and they say it saves to small.
Anyone have any ideas, I am strictly aa apple girl. Never had PC so I don't know what to tell my clients.
Thanks for any help.

Lion Mail: If Windows users have trouble with your attachments

External Hard Drive won't appear on PC (want cross platform)

I have an external USB Hard Drive. I formatted it using the Disk Utility, OS Format and Journaling. Did a small partition in case I needed a system boot drive. Now my sis needed to backup her laptop (Dell laptop), but the drive won't appear in My Computer, it recognizes there is a USB device on the lower task bar, but no drive anywhere.
Do I have to reformat? what steps do I need to make this USB drive cross-platform friendly?
Paul

Hi, Paul.
You may not want to reformat the drive as FAT-32 since there is a limit on the size of the partition, the maximum file size, and other issues, especially if her Dell's drive is formatted as NTFS (FAT-32 does not support NTFS extended attributes). FAT-32 is unsuitable for backing-up Mac OS X volumes as it cannot preserve the extended attributes (permissions, etc.) employed by Mac OS X.
It's really best if you each have your own external hard drive for backup, as part of implementing a comprehensive Backup and Recovery solution, such as I use and detail in my "Backup and Recovery" FAQ. You also don't want one person inadvertently writing over another person's backups, which could happen if one is not careful. Furthermore, it is often easiest for recovery.
How one handles backup in cross-platform environments is tricky and depends on the native formats employed by the different computers involved, and whether backup will be performed over a network or by directly connecting backup drives to the computers one is backing up.
To enable her Dell to use the Mac-formatted drive, install Mediafour's MacDrive for Windows on the PC. MacDrive for Windows is probably the state-of-the-art application for enabling you to use Mac-formatted disks and hard drives on Windows-based PCs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Steps to create Cross-Platform Transportable Tablespaces

hi
what is the steps to do Cross-Platform Transportable Tablespaces.
i want to perform this in my pc, i have linux and windows in same PC, i want to migrate from linux to windows and vice versa.
so can i know complete steps and commands to perform Cross-Platform Transportable Tablespaces. to get complete knowledge i am doing this so i can implement this in my office when any migrate issues comes. so once i do this i will get confidence so that i can do the same in my office which saves my time.
veeresh s
oracle-dba
[email protected]

Hi, also you can review the Note:413586.1 into metalink site.
Good luck.
Regards.

Which product to purchase (cross platform necessary from Mac to PC) Adobe Photoshop 6.0.x to ???

I have ancient Mac photoshop and pagemaker files. i need best cross platform product for windows that can access these files. adobe photoshop is my primary concern. I understand the indesign cs2 will import old school mac photoshop 6.0.x but is not compatible with windows 7 ... thank you.
In particular we use windows 7 x64
So in summary, need to determine which Windows 7 x64 version of Indesign CSxx will still open archaic Mac Adobe files (layouts, EPS, etc). Or is there a similar product that must be obtained. I prefer to stick to Adobe products, however, if I must go elsewhere and you can help -- please advise.
Also, if you know what I should obtain, does this product have a trial download option that I can test functionality before purchase? Warranty when I do buy information -- and return policy in general?
Many thanks.

PM support has long been pulled from InDesign. You are going to need some old version like CS or CS2 and save an intermediate step to ID files. PS is not a probelm at all. All programs have 30day trials and Adobe has a general 14day return policy. Refer to the product pages on teh website.
Mylenium

PDF with special characters (é, ñ) needs to be legible cross-platform(mac & pc)

I am using Illustrator to design a PDF. Because it's in Spanish, accent marks and other special characters are needed (á, ñ).
When I export the PDF from the ai file and view it on my mac it looks fine. However, when I open it on a pc some of the special characters are completely missing.
I tried Creating Outlines with the text, although it will make it harder to update in the future and so less preferable to leaving the text editable. Creating Outlines works fine on the mac, however on the pc the L's appear thicker than they actually are.
Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Thanks!!

Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Yes. You use a correct OpenType font that has the glyphs in the place where they belong and can be embedded without limitations. Older TrueType or PostScript fonts are simply unsuitable as are fonts that cannot be emebdded and require to be installed locally. It all comes down to system language settings vs. the unified environment inside acrobat. This also requires any PDF to be created on systems with the language settings correct in the first place, i.e. creating Spanish text with a Japanese version of AI would be pretty desastrous due to how foreign language fonts are accessed... check these things and then try again. If possible, enforce embedding of the full font in the PDF settings, not just a subset and choose a suitable font.
Mylenium

How to make cross platform screensavers

I work on an Imac on os X. I need to make screensavers for
cross platform (win/mac) distribution. I have flash 8 pro. Is there
any viable solution cheaper than the $200 for "Iscreensaver" or
$300 for "screentime" softwares? Failing that, does anyone have a
preference between the two? do you know if they allow flash
interactivity or just animation?
thanks in advance
Bob

chakradude wrote:
> I work on an Imac on os X. I need to make screensavers
for cross platform
> (win/mac) distribution. I have flash 8 pro. Is there any
viable solution
> cheaper than the $200 for "Iscreensaver" or $300 for
"screentime" softwares?
> Failing that, does anyone have a preference between the
two? do you know if
> they allow flash interactivity or just animation?
Unfortunately there is no choices for you when comes to MAC.
Windows has over
30 really good screensaver tools, some of which very capable
and totally free.
Myself do not use Mac but friends who do, use the
"screentime" as preferred tool.
Check the features, see what you need and which tools deliver
what you looking
for than pick the winner :)
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Cross platform "work around?"

I've done some searching, so I know the answer to cross platform product transfers is a resounding no. I have a mac and I originally bought CS5 for Windows a few years ago when I had a PC. The PC has since died. It appears there's a few ways mac users can switch between running OSX and Windows on their Macs though. My question is, if you ran the Windows operating system on a Mac, would you be able to install /use a Windows CS5 disc on your mac at that point? Theoretically it would seem possible. Anyone have any experience with this?

Just remember that Virtual machines and machine emulation does not perform as well as running a programs in it native environment. Also some things may not work exactly like the should. If you hace a PC CS5 licence you can upgrade that to Mac Photoshop CS6 standard for $200 or Extended for $400

Any cross platform chat app (eg. Whatsapp) for Ash...

Hello,
Does anyone know any cross platform chat app which can be used on Asha 501? I bought the phone today and I was only able to find Nokia Chat which is preinstalled on the phone but that app is not available on android.
Any help regarding this?
Thanks.
Solved!
Go to Solution.

PrakashGupta wrote:
can any one tell whatsapp application supports for nokia asha 501?
Hello ! Please tell me the battery life , is very good ?

What's a good cross-platform choice?

Hey,
I use LE and GB, but I would like to have any suggestions about a good cross-platform program that I could use to do some collaborations with a friend who is stuck with a Windows-based system for now.
Anyone?

If you want a DAW that is cross platform, you have the choice between Cubase, ProTools and Live. Cubase is probably the most Logic-like but considering the full-of-bugs reputation it has, I'd stay away from it. ProTools is great but you'll need dedicated hardware. That left us with the last but not the least: Live. Altough people think this is a loopy, djing kind-of-software, it's a pretty good DAW by itself, even if you're working in a more traditionnal, linear way. I used to do the bulk of my composition work with Logic and do the audio edition with ProTools. Now, the more I use Live, the more I don't use the other two anymore. And believe me, even if that asks you to think differently at the beginning, it gets very addictive!

IPod not crossing platforms

Similar Messages

Maybe you are looking for