IPod not found after update to 9.0.3

I updated my iTunes to the latest version (9.0.3)and ever since, I have not been able to sync my iPod. In fact, iTunes won't even recognize my iPod and when I conncet the iPod to my computer iTunes completely freezes. Also when I connect my iPod, my computer opened up the F: thinking that's what it should do when the iPod was connected. I used the troubleshooting on the support page and changed the drive letter, but it still didn't work. I've also tried the suggestions of uninstalling and reinstalling iTunes, and still nothing, and I've tried restarting iTunes, and of course...nothing. I see others are having crazy problems with the update. Am I to assume this is an update problem, or is there perhaps something wrong with my iPod? If/when Apple fixes this, will there be a good chance the iTunes will recognize my iPod again? Any suggestions would be appreciated!

Same here, any solutions?

Similar Messages

  • Files on 60GB iPod not found after updates to 1.2

    Before I restore just thought I would check. My iPod is conflicted as to what is loaded. Problems occur after update of iTunes 7.0 and iPod updater 1.2.
    Manually update is set. iTunes 7.0 says I have 6.0GB of Audio, 13.82GB of Video on a total capacity of 55.68GB iPod. However it also says I have 54.84GB of free space? All music and video files appear with the ! in iTunes, which means file not found.
    However, all titles of the files appear on the iPod as if they were still there but just not readable? From the iPod's settings, under About, it shows I still have 1250 Audio file, 98 videos but 54.84GB of space available. If I try to play files in a playlist, it just breezes through the album art and titles like it can't read the files.
    Reset, reboot and reinstall does nothing.
    iPod is unusable, should I wait for another update?
    Should I just restore and loose some stuff that was not backed up? (stupid on my part I know.)
    Or does anyone else know of a possible trick I could try?
    Dell   Windows XP  
    Dell   Windows XP  

    Applied Firmware Update 1.2.1 and it worked...
    Thank you Apple for finally fixing a major problem
    without ever acknowledging you had it...
    or even indicating what you update fixed when you distibuted
    it...
    I think apple needs some lessons how to provide support...
    without irritating its customer base...
    All you have to do is communicate...
    Respond with a message like "Known Problem" working on fix.
    would do wonders... And having an apple employee update
    the Discussions with an indication that you acknowledge
    your user community is having a serious problem and thank them for continueing to wait for a fix..

  • I tried to set up my new ipod shuffle and a error message popped up saying Ipod not found cannot update.  I can't sync my ipod now but it is showing on itunes.  What should I do?

    I bought a new 4th gen ipod shuffle and tried to sdet it up last night.  I installed the latest itunes software and started to sync my ipod, but error boxes kept popping up saying ipod not found cannot sync.  It was showing in itunes, then it would disappear, then it would come back.  I am not very good with computers so I don't know what to do.  Can someone help?

    Do you have an iCloud backup?  If you backed up your old phone to iCloud you can go to Settings>General>Reset>Erast All Content & Settings (which will erase your phone), then go back through the setup screens again and when prompted choose Restore From iCloud Backup.  However your backup won't contain everything in your iTunes library (such as your music) so you'll need to be able to sync with your computer unless you purchased everything from iTunes and want to redownload it to your phone.

  • Nokia c3 chat application not found after updating...

    i updated my mobile software from 4.60 to 8.63. after that  i start using the chat/im built in application but it says "APPLICATION NOT FOUND". I even tried opening it on menu then messaging then chat but it really doesn't open. what may cause this? what should i do? thanks.

    You u need to 1st BACKUP EVERYTHING
    then perform the Firmware Upgrade
    then RESTORE your packed up Programs and Data ...
    or just goto the Ovi store and find some free chat apps and reinstal them,
    its cheaper to paste the links it sends your mobile into your phones browswer and surf using Wifi Connection to download apps and themes. good luck
    N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

  • Second AirPort Express Basisstation not found after update

    Hello!
    I'm trying to set a second AEBS in client mode (as defined on http://docs.info.apple.com/article.html?artnum=108040), because I want to use it for AirTunes while I'm connected to the Internet thru the other AEBS I've had.
    I'm following the instructions founded in the support-sites: I do a hard reset for my second AEBS and then configure it with the AirPort Utility (latest version) to use the existing network of my first AEBS.
    Everything is ok *ONLY if I let the network unprotected*!
    As soon as I try to use some kind of protection (thru WPA/WPA2 and password or by hiding the name of the network or even restricting the computers aloud to access the network thru the MAC-adresses), the second AEBS couldn't be founded anymore after the update.
    I've tried this from my MacMini PPC running Leopard and from a pre-latest MBP running Tiger ... both succesless!
    Do you have any advice?
    Thanks!
    Regards,
    Vlad
    P.S. Here are the settings for my two AEBS ... in german (sorry!):
    The first AEBS:
    AirPort Express-Name: BS1
    Basisstation-Status: Normal
    Version: 6.3
    Seriennummer: ...
    AirPort-ID: 00:11:60:2E:7D
    Ethernet-ID: 00:11:60:2E:7C
    USB-Drucker: LaserDrucker
    Drahtloser Modus: Drahtloses Netzwerk anlegen
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Kanal: 1 (Automatisch)
    Drahtlose Clients: 1
    Verbinden über: PPPoE
    IP-Adresse: 85.182.10.203
    Netzwerkname: NW1
    Sendermodus: 802.11b/g-kompatibel
    Kanal: Automatisch
    Schutz: Persönlicher WPA/WPA2
    Optionen für drahtloses Netzwerk:
    Multicast-Rate: 5,5 MBit/s (but I have also tried with 2 MBit/s)
    "Als geschlossenes Netzwerk anlegen" is choosen (but I've tried also without)
    "Störunempfindlichkeit aktivieren" is choosen (but I've tried also without)
    The second AEBS after the hard-reset and before update:
    AirPort Express-Name: BS2
    Basisstation-Status: notLocalized (ist auch gelb)
    Version: 6.3
    Seriennummer: ...
    AirPort-ID: 00:11:24:EB:58:C5
    Ethernet-ID: 00:11:24:EB:58:C5
    Drahtloser Modus: Mit drahtlosem Netzwerk verbinden
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Kanal: 6 (Automatisch)
    Verbinden über: Drahtloses Netzwerk
    IP-Adresse: (leer)
    Drahtloser Modus: Mit drahtlosem Netzwerk verbinden
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Passwort habe ich eingetragen
    Optionen für drahtloses Netzwerk:
    "Störunempfindlichkeit aktivieren" is choosen (but I've tried also without)
    Verbinden über: (inaktiv)
    IPv4 konfigurieren: DHCP verwenden
    IP-Adresse: (leer)
    Teilnetzmaske: 255.255.255.255
    everything else is void
    "AirTunes aktivieren" is choosen
    P.P.S. After clicking on "Update" I receive the following error-message:
    "Das AirPort-Dienstprogramm kann Ihre Basisstation nach dem Neustart nicht finden.
    Die Einstellungen für diese Basisstation wurden erfolgreich aktualisiert. Es gab jedoch ein Problem beim Verbinden mit dem drahtlosen Netzwerk oder die Basisstation wurde nicht gefunden. Wählen Sie Ihr Netzwerk aus dem AirPort-Menü und versuchen Sie es erneut."

    Same problem here:
    I disconnected one of my apx from power and now
    I'm not able to configure it.
    After updating the APX, the Airport Admin Utility cannot find
    it anymore...

  • Server not found after updating firefox. HEEEEELLLPPP!!!!

    Im using windows Vista. 3days ago, I launched firefox setup3.6..exe internet connection and mozilla worked fine.
    when i restarted my laptop, I just can't connect to the internet- it says SERVER NOT FOUND but I am sure Im connected (my brother's laptop is)
    so I uninstalled my NORTON,
    i also UNINSTALLED my MOZILLA and reinstalled it.
    stil NOT WORKING
    checked my firewall... checked mozilla TOOLs- use no proxy
    what am i suppose to do?? i really need my MOZILLA. thanks

    Did you empty your browser cache before typing in your url into your web browser?
    Did you type in the url directly rather than clicking on the visit site button?
    Have you actually published your site? 
    Are you using iWeb built in ftp?  If you are then perhaps try publishing your site to a local folder from iWeb and using an ftp client such as Cyberduck to upload your site to your server.

  • Ipod not recognized after updating software

    1. I returned my Ipod to Apple for battery service.
    2. After getting it back, I updated the software on my computer.
    3. When I plug in the Ipod, I get a message that the hardware did not install properly.
    4. The Ipod does not have an error message on itself.
    5. Itunes does not recognize the Ipod.
    6. I've reset the thing about 20 times.
    7. I'm about to throw the piece of crap away.

    Jim,
    Press "select"+"play" keys and you will see the disk mode sign. plug it with your PC, open the iPod updater and click Restore. Try to use the USB behind the computer instead of the front.

  • 5g 30gig iPod not working after update, Please Help!

    I have a 5th gen 30gig iPod and a yesterday I tried to update it. During the update after it shut itself off and started back up the updater froze around 20%. After about two hours of waiting I forced the updater to quit (restarted it with menu/select) and then tried to turn it back on to no avail. So right now the iPod is dead.
    I've tried the whole hold menu/select to reset (even for up to a min) then I did the flip hold on and off and try again method. I also tried with the iPod plugged into my PC and my Mac. I also tried using the AC adapter. All attempts resulted in failure. Because it stopped working after the update I'm confident that it isn't the battery or that the iPod is physically damaged and that this is just a software issue.
    Any help would be greatly appreciated. I've had the iPod for a little over a year and therefore have no warranty for it.

    I am having the same exact problem as you, it just won't boot up. The apple logo lights up on the screen for a little while and tried to boot up, then the screen goes black, and it starts over, the ipod trying,(and failing)to boot up. This goes on like this until the battery is dead. I'll repost if I figure out how to fix this.

  • Some kde aps not found after update

    I just did a massive (1gb) update last night (I know update more often!!)
    Most things seem to be fine, except several kde aps aren't found. Konqueror, dolphin and kopete are the ones that don't work so far. I searched the forums but didn't find anything. What's up? I assume it has to do with the new kde-meta-* packages. Anyone know how to fix this?
    I checked via pacman and the proper packages seem to be installed..

    I should have been a lot more wordy on my last post.
    Almost all of the time that you get file no found errors for stuff that's in the PATH is because there's a mix of binaries for different architectures (64 bit and 32 bit in case of Arch). Although, with KDE stuff it would be strange to not get wrong ELF class errors. Did you enable any new repos recently?

  • Error  0x8000066- Ipod not recognised after updating!!

    Hi
    can anyone help me with this error!! Was updating my sons ipod when the cable came loose. when I plugged it back in it said it was returning it to its factory settings. Now itunes is telling me it doesnt recognse the device because of this error- code above
    Can anybody help?
    Thanks!!

    I wouod start here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)
    http://support.apple.com/kb/TS1538
    (iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues)
    I searched the forum but could not find the same error number you received.

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • How to delete photos off my ipod touch 4g after updating

    How do u delete photos off my ipod touch 4g after updating it to ios 6.0.1?

    To delete photos and videos from your device
    To delete synced photos and videos
    In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Click Apply.
    To delete Camera Roll photos and videos
    There are two methods to delete items from the Camera Roll:
    Import the Camera Roll to your computer, choosing to delete items after import.
    or
    Delete photos and videos from your device manually. Open the Photos application, open the Camera Roll, tap the Action button, tap each photo to select it, and tap the Delete button.
    Note: For photos and videos you want to save for later, import them to your computer before deleting them from the Camera Roll.
    http://support.apple.com/kb/HT4236

  • VIBER is not working after updating android 4.3 on my Experia SP.Any idea or solution ?:-)

    Viber is not working after updating my Xperia SP to new Android 4.3There are totally confusing simptoms: I can not hear the other party,  the other party can not hear me , I can not answer the call even when I try to  or the other party can not answer my viber call even if they try to. CAN SOMEONE HELP or HAVE ANY IDEA :-)

    I also had problems with xperia sp after updating to 4.3 - phone was slow to an extent of being unusable. However, even before update (on firmware 4.1) I found the phone quite slow.I am very happy that I returned the phone to my carrier in exchange to nexus 5. When I got hold of it I really felt the change in responsivenes compared to sony. I cannot recommend it more - it has all the sony has + better responsivness, better screen, better battery life (yes, I have tested this), better camera minus bloatware. I got all of this for paying 50 eur more. That was my second and last phone from sony. After having sony xperia S for 1 week and returning it because of wifi problems and after trying xperia sp and again returning it because of crappily written firmware I really wonder what are people at sony thinking about.  People, don't you see that sony does not give a **bleep** about customer satisfaction after getting their money?  Of course, you can downgrade manually, but don't forget that this voids your warranty - staff at service centre would be more than glad to tell you you have just voided your warranty because you brought them phone that you had to downgrade because of crapilly written UPgrade!.  In addition to that downgrade means spending your a couple of hours of your precious time correcting mistakes of multinational corporation that simply does not give a **bleep**. Throw your sony into trash instead, and use those hours to earn money with which you can buy new phone that will actually work. 

  • HT4623 Iphone 4s auto lock is not working after updating ios6

    my Iphone 4s auto lock is not working after updating ios6 i restore 3 times but still geting problem

    Hello, Chirag25.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are having an issue with the back camera.  Here is a troubleshooting article that I would recommend going through.  If none of the troubleshooting steps resolve the issue, see step 4.  
    Get help with the camera on your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT203040
    Cheers, 
    Jason H. 

Maybe you are looking for