Ipod not recognised in ITunes. My solution (try this - worked for me!)

Hello. i had IPOD 30GB vid for Xmas and have spent 3 days surfing through info trying to find out why itunes did not recognise it!
I could see it in my computer but not itunes. I tried everything - and I mean EVERYTHING. I reinstalled, rebooted, restored reset etc etc! We had 2 IPODs to install so we knew it couldnt be a total hardware failure as both were doing the same thing.
Sorry if this is too basic for the techie people but I needed these instructions!
My problem was that Ipod was recognised as the C drive. Im not sure why this caused such a huge problem but there was a simple solution.
Following installation of software (inc new version from website) open Itunes. If your IPOD is not showing up in Itunes, (be patient though - it sometimes takes a few minutes) please try this first!
Open MY COMPUTER and wait until IPOD is showing in there (again - it sometimes takes an inexplicable amount of time - but be patient)
Click on START icon,
Right click on MY COMPUTER,
MANAGE,
STORAGE
right click DISK MANAGEMENT
ALL TASKS
CHANGE DRIVE LETTER AND PATHS
Now change the IPOD drive to a letter after L (I used Z for one of the IPOD and X for the other to be on the safe side!) You need to do this for EACH IPOD you want to plug in.
Now close this down - reboot your machine and start again.
Open Itunes and be patient. It sometimes takes the system up to 2 or 3 minutes to recognise the IPOD is connected.
Good Luck!

I was experiencing the same issue and tried the standard install/re-install steps. I also played around a bit with the msconfig soultion but unfortunatley this didn't work for me.
On one of my other machines I just finished configuring a Shuffle for my kids. It required me to install a later IPod updater (iPod Updater 2005-11-17). You can find it at http://www.apple.com/ipod/download/
This seemed to do the trick for me. Goodluck

Similar Messages

  • Ipod not recognised by itunes win 7 64

    my ipod  160gb is invisible to itunes in win 7 64b computers intel and amd. ***?, over.
    did the rrreboot bs, reinstall, yada yada yada. ipod recognised as a device...sapping my will to live--need driver and head help!?

    DominicH wrote:
    Since upgrading itunes and loading iOS4 on my touch, my nano is not not recognised by itunes (appears in my computer). *I have installed itunes 3 times and carried out most of the other diagnostics suggested in the support pages of this site* (note, i get a message from microsoft not to use the clean up software suggested). I have not restored the ipod as I cannot get it to connect and in any case I am worried if I do restore it I will loose all the music on it and then not be able to re-load due to the prob above.
    Make sure the iTunes you were installing is the latest version.
    Have you tried all the solutions mentioned in the iPod nano (5th generation) - User Guide? Since you did not list all the troubleshooting steps you tried other than installing iTunes 3 times, you may as well call iPod tech support. Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. I_f you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod._
    Contacting Apple for Support and Service (International)

  • Ipod not recognised in Itunes or Updater

    A few days ago when trying to update my ipod it said it had failed, then itunes wouldnt find the ipod. Usually when this happens i remove the ipod, and reattach it. This time it stopped working, now whenever i try to turn it on it shows me the folder and "!" for a second and shuts off. When I attach it to the computer is shows me a smaller no entry "do not remove" sign, like it has fallen back to older software, even though the ipod came with the last version before the 10/01/06 update.
    Itunes and Ipod updater does not recognise ipod, but when i put it on disk mode, my computer does. When i try to go on ipod in my computer it tells me i need to format. Should I format? What should i do? I cant update or restore software as updater doesnt find ipod.

    Don't format. If your computer recognises your iPod, that's all that matters.
    Try this. You need to go back to updater 1.0. The most recent version is a dud.
    Before you do that, all of you reset your iPod.
    1) Slide the lock button to ON.
    2) Slide the lock button to OFF.
    3) Press 'menu' and 'centre' button together for several seconds.
    4) Follow the instructions.
    If your iPods are vaguely functional, you should be able to restore to the previous updater.
    1) Uninstall the 1.1 updater from your computer.
    2) Install 1.0 from the CD that came with your iPod.
    3) Plug in your iPod.
    4) Run the 1.0 updater.
    5) Resync with iTunes.

  • Ipod not recognised in itunes or my computer - and no 'devices' option

    I am in Windows XP, 'My Computer' doesn't recognise my iPod and neither does itunes. Please can someone help!?!
    I have 60Gb colour screen ipod (but not video ipod) and has worked for the last year approx since I had it, always used to update automatically as soon as I plugged iPod into the computer. I had been using an old version of itunes until last night I was finally told that in order to continue to purchase music from itunes I have to download the latest version (itunes 7.02). This downloaded fine but today went to sync my ipod and get the new music/podcasts on my ipod and I can't seem to get itunes to recognise my ipod at all.
    I don't have a 'devices' option (just Library, Store, Playlists), no iPod symbol and 'Sync ipod' in 'File' cannot be selected. Can't find ipod in My Computer either. All it does is charge when I plug it in, even though battery is already fully charged!
    I have tried restarting computer, plugging in ipod before starting the comp, uninstalling and re-installing itunes, checking in 'run' etcetc
    Please help...can't put any of my music on to my ipod
    Thx
    Rachel
      Windows XP  

    Just in case this problem is affecting anyone else - I have since found the following post by 'Thegua' and it has worked so thank you so so so much!!
    (I only had to get as far as reinstalling my iPod, didn't have to continue on to doing the 5Rs, and I didn't lose any music) THANK YOU THANK YOU!!!!!.....
    The solution 2 ur problem is the ipod 5R's . u will need 2 reset ur ipod and if possble reinstall de ipod and itunes softwares. but first u will need 2 try reseting ur ipod , it will not delet the songs on ur ipod, it refreshes ur ipod. try that first. move de hold button near de earphone hole. it has a red sign. move that switch back and forth about three times and press de select button (middle ) and the menu button all at de same time , then hold dem both until u see de apple logo appears (apple sign). the release all buttons, ur ipod is reset. if this work then do the 5R's.to know wat de 5R's are go to apple.com and u will see it at de left hand corner of ur screen. it is five steps that will correct any problems u r having with ur ipod. it should correct them. it involve resetting ur ipod, restarting ur computer, reinstalling ur ipod and itunes softwares and runing de updator files, and all that. try it, if that dont work it means u will have 2 send the ipod 4 repairs.
      Windows XP  

  • Help - My 5th Generation Ipod not recognised by ITunes but 1st Gen Ipod is!

    Can anyone help? This is driving me mad!
    I recently purchased a 5th Generation 80gb Ipod. Before installing to my PC I downloaded the latest 7.2 version of ITunes together with quicktime. However whenever I plug my new Ipod in, nothing happens other than the 'Found New Hardware Wizard' appearing in XP asking for the driver to be installed and the Ipod Charging/displaying that it is fully charged.
    I have spent hours going through the apple site and following their suggestions on this and have done the following:
    Re-started the iPod service
    Uninstalled and re-installed ITunes 7.2 (at least 5 times now!)
    Deleted all my temporary folders and temp internet folders and cleared cookies, files, etc
    Ran Windows Install Cleanup Utility to clean up any leftover installer files
    Tried the Ipod in all of my USB 1 & 2 ports (My MESH PC is less than a year old)
    I then contacted Apple Support who suggested I try my Ipod on another computer and if it didn't work to return it to them. So I duly installed iTunes (7.2) on my laptop at work and hey presto my Ipod was recognised and I was able to download a few tunes.
    I glean from this that there can't be a fault with the Ipod itself??
    Back at home I re- tried all of the things above and then after still no joy I connected my old 1st generation ipod to my pc and after some time ( at least 5 minutes) iTunes recognised the old ipod and syncronised. Using the same USB Port and the same cable I plugged in the new Ipod but still nothing happened other than being asked to install the driver once again!
    Now all would be fine if I kept my music collection on my work laptop but unfortunately this is not possible and I could even get into serious trouble for having iTunes on there.
    If anyone has any suggestions I would be really grateful as £200+ is a lot of money to pay for something that does not work!

    The "driver" never was available from Apple. The driver files that Windows uses to communicate with an iPod are standard Windows OS drivers for a USB Mass Storage Device. If Windows cannot/does not recognize your iPod at all, not even at the driver level, it's likely an OS issue, unless the iPod fails to work on another computer as well. At that point you'd been dealing with a bad cable or bad iPod. Since another iPod works with the same cable, then it should be fine.
    Try everything in this article that you haven't already tried:
    http://docs.info.apple.com/article.html?artnum=61711

  • IPod Touch not recognised by ITunes but my iPhone 4 works fine.

    I am currently not able to sync my ipod touch as it is not seen by iTunes when I connect it.
    I am using Windows 7 and the latest version of iTunes and have followed each of the steps listed at
    http://support.apple.com/kb/TS1495
    but still can't sync.
    I have listed several key bits of information which I hope someone can explain.
    1. My iPhone 4 sync's fine - same user account under windows, same usb cable.
    2. When i plug in the ipod touch it starts to charge and iTunes appears to hang. e.g hovering over the file menu doesn't highlight the options. If I wait roughly 3 mintues iTunes starts responding again (file menu's are activated) but still doesn't recognise the ipod touch.
    3. If I do this over and over again I 'sometimes' get iTunes to recognise the device but it presents the 'Restore from backup or restore to factory settings'. If I select restore from backup it then informs me the backup is corrupt. The randomness of getting to this stage has no consistent steps and i've been unable to get to this point over the past 3 days.
    4. I recently bought a movie from iTunes and get the message 'The movie could not be played' and since getting this message i've been unable to get iTunes to see the device.
    Any help greatly appreciated.

    I've finally managed to get the device recognised my Windows. The solution was to take my ipod touch round to my friends house who own's an apple mac. Plugged into the Mac itunes instantly see's the device and everything is back to normal.
    I can know get my Windows 7 machine to see the device in iTunes. The strange behaviour I see on Windows 7 box is, on plugging in the device iTunes hangs if I then unplug the device and reattach it (repeat this several times) eventually iTunes doesn't hang and sees the device.
    Not at elegant solution granted but hopefully this may help someone out. This is obviously a software bug (is it that I am also syncing my iPhone?) as I've ruled out all the hardware involved.

  • Ipod not recognised by itunes

    i plug my ipod in but itunes is not recognising it, not sure what to do? i've downloaded the latest version of itunes but still nothing. and i've somehow wiped off all the songs on the ipod without even realising, any help would be appreciated?

    Hey bradfield,
    What type of iPod do you have?
    If you have an iPod touch, try the tips in this article: http://support.apple.com/kb/HT1852
    If you have one of the other iPods, try the tips in this article: http://support.apple.com/kb/TS1369
    You may want to try the tips in this article: http://support.apple.com/kb/TS1878 also.
    -Jason

  • Ipod not recognised by iTunes or My Computer

    Initially I successfully linked my ipod to iTunes and the iPod screen displays "Do not disconnect"
    This time I have connected my iPod and it doees not display the "Do not Disconnect" symbol.
    iTunes does not recognise the iPod. My Computer does not recognise the iPod.
    I have reinstalled iTunes. I have reset my iPod.
    The iPod also works on another computer without any problem.
    I tried the Network drive solution listed on this site but Disk Management does not list the iPod either.
    I do not know what to do now?

    I seem to be having the same issue as Neurovir. My computer and iTunes recognize my year-old 1st-Gen 512MB Shuffle, installing a Disk Drives >> "Apple iPod USB Device" driver AND a USB Controllers >> "USB Mass Storage Device" driver when I plug it into the USB port. But when I plug in my 5th-Gen U2 iPod with Video, it comes up in the Windows Device Manager as /!\ Other Devices >> "iPod" and runs the Found New Hardware Wizard. The wizard cannot find drivers for the iPod, nor will it let me chose the drivers to use, even though I know exactly which ones I want it to use. iTunes also does not recognized that an iPod was connected to the machine.
    I tried both my Shuffle and my iPod in another computer, and both were recognized by Windows and iTunes. I looked at the driver versions that that computer uses, and they are the same versions my computer uses when I plug in the Shuffle.
    I originally was trying to find Apple drivers for Windows XP on this site, but I see that I don't need them -- because they are on my machine, I simply cannot get XP to recognize the iPod as a device that needs the "Apple iPod USB Device" and "USB Mass Storage Device" drivers.
    Homebuilt   Windows XP   2GHz A64 2GB RAM

  • Ipod not recognised in  itunes and crashes it

    Hi,
    Please help!
    I have a 20GB ipod and have recently got a new laptop - have downloaded itunes.
    It is saying ipod is corrupt but freezes itunes so i can't restore. Ipod now won't turn on - goes black. Tried resetting it.
    How can i restore it if i can't get the ipod up on itunes?!

    Just in case this problem is affecting anyone else - I have since found the following post by 'Thegua' and it has worked so thank you so so so much!!
    (I only had to get as far as reinstalling my iPod, didn't have to continue on to doing the 5Rs, and I didn't lose any music) THANK YOU THANK YOU!!!!!.....
    The solution 2 ur problem is the ipod 5R's . u will need 2 reset ur ipod and if possble reinstall de ipod and itunes softwares. but first u will need 2 try reseting ur ipod , it will not delet the songs on ur ipod, it refreshes ur ipod. try that first. move de hold button near de earphone hole. it has a red sign. move that switch back and forth about three times and press de select button (middle ) and the menu button all at de same time , then hold dem both until u see de apple logo appears (apple sign). the release all buttons, ur ipod is reset. if this work then do the 5R's.to know wat de 5R's are go to apple.com and u will see it at de left hand corner of ur screen. it is five steps that will correct any problems u r having with ur ipod. it should correct them. it involve resetting ur ipod, restarting ur computer, reinstalling ur ipod and itunes softwares and runing de updator files, and all that. try it, if that dont work it means u will have 2 send the ipod 4 repairs.
      Windows XP  

  • Ipod not recognised in itunes or my computer.how can i restore/format then?

    on my work pc i can't see the ipod. when i connect it to an usb port, nothing happens, the "do not disconnect" screen does not appear, but it charges for a few minutes and it suddenly stops, and the battery is at minimum.
    on my laptop, windows xp pro too, but a poorer configuration, i can see it, but still it wont charge. itunes says to restore, but i have some files that i dont want to loose, and when i go into disk mode and try to open the folder the laptotp freezes. is there anyway i can recover those files (photos) ?
    and why my office pc, which has better requirements than my laptop, cannot see it? (both have xp pro)

    Just in case this problem is affecting anyone else - I have since found the following post by 'Thegua' and it has worked so thank you so so so much!!
    (I only had to get as far as reinstalling my iPod, didn't have to continue on to doing the 5Rs, and I didn't lose any music) THANK YOU THANK YOU!!!!!.....
    The solution 2 ur problem is the ipod 5R's . u will need 2 reset ur ipod and if possble reinstall de ipod and itunes softwares. but first u will need 2 try reseting ur ipod , it will not delet the songs on ur ipod, it refreshes ur ipod. try that first. move de hold button near de earphone hole. it has a red sign. move that switch back and forth about three times and press de select button (middle ) and the menu button all at de same time , then hold dem both until u see de apple logo appears (apple sign). the release all buttons, ur ipod is reset. if this work then do the 5R's.to know wat de 5R's are go to apple.com and u will see it at de left hand corner of ur screen. it is five steps that will correct any problems u r having with ur ipod. it should correct them. it involve resetting ur ipod, restarting ur computer, reinstalling ur ipod and itunes softwares and runing de updator files, and all that. try it, if that dont work it means u will have 2 send the ipod 4 repairs.
      Windows XP  

  • Ipod not recognised by itunes after restore

    what do i have to do to get it recognised by itunes again after restore??? all help needed

    Try this. With your iPod connected, reset it. It may take several attempts. Also, try connecting to a different port.

  • Ipod not recognised by; Itunes, Explorer or updater

    Hello I need some help,
    I have a U2 20 GB Ipod and have has no issues for 18 months. Now it can't be recognised by Itunes, Windows Explorer or the brand new updater and does not play back most of my music.
    I have tried the 5Rs. However most of the time after resetting it shows either the folder icon or the sad icon. Occasionally it will fully reboot, but then will only play a few of my songs before skipping to the next one. Whilst its doing this you can really hear the harddrive going "crunch".
    I have also tried Forcing it into disk mode and attempting to restore it using the new updater but then I only get the message "can't mount ipod" from the updater. Whilst it is connected to the PC the ipod hard drive continually spins up and goes crunch, stops and then starts spinning again. This doesn't stop until i disconnect it.
    I have another Ipod which connects to itunes and the updater with no problems at all
    Am I right in thinking that that the hard drive on my ipod has finally died?
    Brownda

    I have had same problem for months, i sent my 40gb click wheel back after hours of trying the support and when returned exactly the same, i was getting a new pc in july so did everything from scratch again as only thing i'd not tried was a new pc and cable - still same problem and now apple say its over 1year old (15th June05) and want £160 to repair - it says in restore "unable to mount ipod", my computer only recognises it for a second whilst the ipod clicks and whirrs and then shuts down with a glint of the exclamation mark folder and this is after returning it 4 times for repair in the 1 year I had it after paying over £300 - my suggestion as i am doing is go to the small claims court and for a £25 fee sue them as its obviously not fit for purpose - by the way there's no one to talk to and no way to sent this feedback to apple direct!
    lousy and expensive time wasting gadget when its broken

  • IPod not recognized by iTunes - Possible Solution for Networked Users

    My shuffle was recognized by my PC, but not by iTunes. After much trial and error I stumbled onto an answer. My computer is part of a network with a local server. If I leave the iPod in the USB port and reboot, my computer won't be connected to the local network, but [Hallelujah!] iTunes now 'sees' the iPod and LIFE IS GOOD.
    Hope this is helpful to someone.
    Dell   Windows XP   iPod Shuffle; computer network

    THANK YOU! I have been trying for several hours now to get my pc to recognize the iPOD Shuffle again. Thought it was due to iTunes update, tried the 5 R's etc. Your suggestions worked! I was connected to the network at work.

  • My ipod not recognisable by itunes i have tried everything suggested by app

    ok, here is how it started. i wanted album art in my ipod, so i searched the web got all the album art i could and put in each album stored in my itunes. everything was going smoothly when it came to one particular album and from tat time i m having this problem. when i connect the ipod the "do not disconnect message" is displayed and it never goes away and itunes isnt opening either. when i open itunes the ipod is not displayed. and i have to disconnect the ipod with the "do no disconnect" still on. will ther be any problem pls help.....

    my ipod is not displayed in itunes... so i have to shut down my comp everytime to disconnect my ipod. everytime i connect ipod to the comp, the do not disconnect message appears on the ipod, but my ipod is charging but it s not displayed in itunes. i m not able to manipulate my songs. i have been hearing the same set of songs for a lnog time..

  • Since changing over to a new BT hub my iPad mini will not recognise an Epson XP printer although this worked fine with Sky. Printer and iPad set up for new hub and independently recognise hub

    Since changing over to a new BT home hub, my iPad mini does not recognise an Epson XP 305 air printer although system worked well on previous Sky hub. Both printer and iPad set up and recognise hub independently. Has anyone come across this problem?

    RoyceRichards72 wrote:
    If this is the issue, and that makes a lot of sense since there have been numerous disconnections since December, how do I get it uncapped again?
    Do you know why there have been multiple disconnections?
    Once the instability stops, DLM will automatically begin raising your speed.
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

Maybe you are looking for

  • Error While Adding File in Mimes

    Hello Experts, I am new to WDA, and am trying to add a image as a mime object in the WD component. But its giving an error "Error when Loading File" I tried putting the image in the Mimes repository but still the same error. Any clue what can be the

  • Pixel length of text in applet output useing drawString()

    is thier a way to find the pixel length of a string of text when im going to output it useing drawString in a applet to say i am going to "draw hello world" in a applet i wish to use drawRect around it i know were it starts i want to know the length

  • An error occurred while reading files or writing files to disc. The disc may be full or there may be

    Does anyone know why I get this error message in PSE9 on a mac computer? An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media. I cant put titles on pictures or delete the

  • How to add Hindi language in Portal

    Hi,    Can someone tell me how I can have Hindi language in Portal. For this I have gone through some forums, but didn't get the perfect answer. For this what I had done is as follows : 1. Export the com.sap.portal.admin.wizardframework.par.bak file.

  • Call an Application Module deployed as EJB into JServer from a client

    Hi all, I've successfully deployed a BC4J Application Module as EJB Session Bean into Oracle8i 8.1.6. The deployment descriptor (file LoginModule.dd) starts with the foolowing lines: Session Bean ricercalista.server.ejb.LoginModuleServerEJB BeanHomeN