Ipod Not Recognized After iTunes 7.0 Upgrade

Hello
My 5th generation iPod was synching just fine with iTunes 6.0.5. Then, I upgraded to 7.0 and it's no longer recognized, though Windows sees the device just fine. I followed the troubleshooting steps at article 93716 (http://docs.info.apple.com/article.html?artnum=93716), to no avail. I uninstalled and reinstalled. No luck. What a mistake, and my 90 of "complimentary" support ended a couple days ago.
I have a reasonably powerful system with adequate resources (1 GB RAM, 2.53 GHz, 120 GB storage - 50% free) and very few other services being loaded - only the basics. I installed with Antivirus, Firewall, Antispyware off.
So now I only have two choices - restore an earlier disk image backup, or reinstall from the original disk.
Any other ideas?
Thanks!

I ran it twice for you. First result is after rebooting the computer with the iPod plugged in.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
MICRO-STAR INC. MS-6580
iTunes 7.0.0.70
iPodService 7.0.0.70 is currently running.
iTunesHelper 7.0.0.70 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskMaxtor6E040L0_________________________NAR61590, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD1200JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
USBSTOR\DiskLexar__Media_Inc._CF__009E, Bus Type USB
USBSTOR\DiskLexar__Media_Inc.SD/MS009E, Bus Type USB
USBSTOR\DiskLexar__Media_Inc.SM/xD009E, Bus Type USB
Universal Serial Bus Controllers:
NEC PCI to USB Open Host Controller, PCI bus 2, device 2, function 0. Device is working properly.
NEC PCI to USB Enhanced Host Controller (B1), PCI bus 2, device 2, function 2. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2, PCI bus 0, device 29, function 0. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4, PCI bus 0, device 29, function 1. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7, PCI bus 0, device 29, function 2. Device is working properly.
Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD, PCI bus 0, device 29, function 7. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information
JOHN'S IPOD (P:\), iPod with video running firmware version 1.1.1
Serial Number: XXXXXXXXXXX
Bus Speed: 61440
The last connected iPod serial number: XXXXXXXXXXX.
This second result it having ejected the iPod and plugging it back in.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
MICRO-STAR INC. MS-6580
iTunes 7.0.0.70
iPodService 7.0.0.70 is currently running.
iTunesHelper 7.0.0.70 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskMaxtor6E040L0_________________________NAR61590, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD1200JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
USBSTOR\DiskLexar__Media_Inc._CF__009E, Bus Type USB
USBSTOR\DiskLexar__Media_Inc.SD/MS009E, Bus Type USB
USBSTOR\DiskLexar__Media_Inc.SM/xD009E, Bus Type USB
Universal Serial Bus Controllers:
NEC PCI to USB Open Host Controller, PCI bus 2, device 2, function 0. Device is working properly.
NEC PCI to USB Enhanced Host Controller (B1), PCI bus 2, device 2, function 2. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2, PCI bus 0, device 29, function 0. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4, PCI bus 0, device 29, function 1. Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7, PCI bus 0, device 29, function 2. Device is working properly.
Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD, PCI bus 0, device 29, function 7. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: XXXXXXXXXXX.
  Windows XP Pro  

Similar Messages

  • IPod not recognized after iTunes 8.0.2 update

    I recently updated iTunes to 8.0.2 and now my ipod is not recognized by my mac or iTunes. I went through all the steps (5 r's) including putting it into disk mode and uninstalling/reinstalling itunes, reboot,etc. Nothing works...When I plug in my iPhone using the same cord it is found. It also finds my Apple Tv without any problems. My ipod classic(80g)plays and charges without any issue. Not sure what my next step is...

    ^Me too!
    I have an 80GB Classic too, and it won't sync. It is recognized by iTunes - and it goes through the 'synching' process, But then it just stops and says "eject before disconnecting" but nothing has transferred.
    I have an old 1st gen 2GB Nano which still syncs fine.
    Also, I noticed iTunes crashed the first time I attached an iPod after the update. I reopened it, but have not been able to sync the 80GB Classic since then. Is this some kind of common occurrence? Can anything be done or do we have to wait for the next update?
    Thanks for any help in advance...

  • Ipod 4th generation w/software version 4.3.1 not recognized by itunes since we upgraded to snow leopard.

    ipod 4th generation w/software version 4.3.1 not recognized by itunes since we upgraded to snow leopard.
    Help, How do we update and keep the apps/songs on the ipod?

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not forget the Additional Information paragraph since that may be the problem/solution.

  • Ipod not recognized by itunes

    My ipod mounts on the pc, itunes does not see it. An error pops up saying that the ipod is write protected...???? I restored it, reinstalled, rebooted. Not sure what other steps to take.. Thansk for any help.

    Hello Jennifer,
    Thank you for using Apple Support Communities. 
    Sorry that your iPod isn't recognized. The following articles should help you sort out what is going on and get your iPod working again. I didn't see if you are using OS X or Windows, so I included the articles for each. 
    If you don't see your connected device in iTunes for Mac - Apple Support
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Regards,
    Jeff D. 

  • TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

    I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working.  Finally got iPod software to properly install. Please help!

    Did you try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Why is my iPod not recognized in iTunes?

    Why is my iPod not recognized in iTunes?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod not recognized by itunes but is by iphoto

    Hi,
    My ipod is not recognized by itunes (it's does not appear in the left section) but it is in iphoto (aks me if I want to import 15 elements).
    I have follow the instructions bellow with no success.
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Can someone give me a hand please,
    Ipod touch 2 gen
    Mac OS 10,6,8
    itunes 10.5.2

    Have you tried the this part of the omne link you post:
    Additional Information
    In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.
    The link you provided is confusing since the first line give you the link for Windows and second for a Mac.

  • IPod NOT recognized in iTunes...'Recognized' in My Computer...W7

    Hello, just joined community, my name is Dominick, glad to be here.
    So all of the sudden my iPod is NOT being recognized by iTunes.  I have the most recent version of iTunes.  I am running Windows 7 64-bit on my Lenovo Laptop.  Long story/synopsis below...
    It is being recognized in 'My Computer.'  It is recognized as "Removable Disk."  If I click on it, it then says "You need to format the disk in drive G [USB port its in] before you can use it".  Then asks me if I want to Format Disk or Cancel.  However, if I ask it to Format disk, it fails to do so every time.  After failing, it then says...
    "Windows can't Format G...Check to see that disk and drive are connected properly, make sure that the disk is not read-only, and then try again.  For more information, search Help for read-only files and how to change them."
    Can anyone provide some clarity on this statement?  Can I change its properties to read-only and will that work?
    Again, my iPod is NOT being recognized in iTunes, so I cannot restore it.  I figured that would be my best solution at this point.  When I run Diagnostics in iTunes and run the "Device Connectivity Tests", it tells me all 3 Support Services are working/green amd 2 of the 3 Ports are working/green...the only not working/red item is "No iPod...found", which of course just means itunes cant recognize my iPod when plugged in...back to square 1.
    Also, I came across the Apple page dedicated to troubleshooting an iPod that is NOT recognized in iTunes, but is recognized in My Computer. 
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    However, after exhausting all options listed here, my iTunes is still not recognizing my iPod.  I then tried uninstalling iTunes and all its component programs, e.g. Quicktime, Bonjour, Apple Device Services, etc. and reinstalling and this did not work.  I then tried plugging in my iPod into a friend's computer with latest version of iTunes and that didn't work either.
    To provide a little more background on how I got here, my iPod was acting funky over the past 2 weeks...meaning it would be slow to response, random songs would freeze/not play, and then start playing again, or freeze altogether, then I'de have to reset my iPod by pressing Menu and middle-button...I was planning on restoring it yesterday just to fix its minor issues that at the time were just annoying...but as fate would have it, here I am now...
    When I plugged it into my laptop to Restore it yesterday morning, it took a LOOONG time for iTunes to recognize it, then iTunes told me the iPod was corrupt and I should Restore it...well, being an ignorant peion that I am, I instead disconnected it and tried Resetting it again to see what that would do...it then was totally frozen, wouldnt respond to pressing Menu and middle button to Reset iPod, and wouldnt get recognized by iTunes or My Computer when I plugged it in...once the battery died, I was able to charge it up, all the music and files were gone, and I had to select a language...I then plugged it into my Laptop to see what would happen, and per above, here I am now with iTunes no longer able to recognize iPod, but My Computer can, and everything else per above.
    I've tried EVERYTHING I can find under the sun to fix / Restore my iPod / get iTunes to recognize it.  Any last-ditch efforts from the Apple Community?  Again, I already exhausted all options I can think of / find, including per link above...http://support.apple.com/kb/TS1363?viewlocale=en_US....my hope is mebbe someone else here can provide another option that will magically work or can decipher what my Computer is telling me per above when it fails to Format my iPod.  Otherwise, this iPod is probably now FUBAR...
    Hope that makes sense.  Please lemme know any thougts or questions.  you may have.  Thank you for your time.
    Dom

    From the Classic iPod manual.
    To reset iPod classic:
    1 Toggle the Hold switch on and off (slide it to HOLD and then back again).
    2 Press and hold the Menu and Center buttons for at least 6 seconds, until the
    Apple logo appears.

  • Ipod not recognized by itunes or laptop

    i have an ipod touch 4g and i can't get it to be recognized by my sony vaio laptop.
    i recently got a new laptop and just finished transferring my itunes library over to it.
    i went to sync my ipod, but i had endless problems with my old and new library. long story short, i reset it completely.
    on my ipod, i set everything back to their old settings and whatnot, but when i went to sync it, my ipod didnt show up in my computer or itunes.
    i restarted, checked for updates, and all that with amds and itunes. i followed every suggestion from apple support, troubleshoot, and ran diagnostics from itunes. the diagnostics still say that there is not an ipod found.
    on its own, my ipod functions correctly and recognizes to be charged from my usb port. itunes and windows wont recognize it though
    is there anything else i can do? this is really frustrating me.
    thanks!

    - So you tried everthing here:
    iOS: Device not recognized in iTunes for Windows
    - Does it charge?
    - Have you tried another cable?
    - Try a known good compuuter.
    - Reset the iPod, nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Make an appointment at the Genius Bar of an Apple store.

  • Ipod not recognized by itunes or windows.

    Hi there, I have an 80gb Ipod classic which is not recognized by itunes or windows. The "Use iTunes to restore" message appears on my ipod but when I connect it to my pc itunes does not recognize it. Windows shows a message informing me that I need to format the drive but is then unable to do so. Ipod will not go into disk mode either. I have tried reinstalling itunes and using the ipod in a different usb drive. I have also connected it to a mac and a windows pc but nothing happens. I have tried to use the diagnostics mode on the ipod but that will not work either. I am wondering if my ipod's hard drive is corrupted.

    Hello,
    My iPod is not being recognized by iTunes or internet
    explorer. It used to, but not anymore. It just
    dosent show up when I connect it to my computer.
    Also, the "do no disconnect" sign does not appear on
    my iPod when I connect it. It is still able to
    recharge, though.
    have u tried a different usb port?
    I read that I have to restore it. I have tons of
    songs in my iPod that I do NOT want erased! How can
    I back these songs up? I have some songs on my iPod
    that are from another person's computer, so if they
    get erased, the songs are gone forever.
    try this http://www.copypod.net/
    Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

  • Ipod not recognized by itunes, why?

    I got a new Ipod and it is not recognized by Itunes. I have reinstalled itunes. I have tried to reset the ipod. It also does not show up on Windows Explorer. I tried changing things in the MSCONFIG file and it still did not work. The USB ports work and I have checked that by plugging in an external HD. Any suggestions?

    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows

  • HT202274 Password change old password not recognized after 10.9.5 upgrade

    God bless you, peace.
    macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
    I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
    recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
    1. Tech work replaced optical drive,
    2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
    3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
    I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
    It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
    I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

    Try running the combo update. It fixes more files/data than the App Store upgrade.
    10.9.2

  • 2nd generation touch ipod not recognized by itunes or Macbook

    2nd generation touch ipod is no longer recognized by itunes. The ipod has been reset and the only screen image is the itunes icon with an arrow and a USB cord connection pointing to the itunes icon.

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If you have Snow leopard do not forget to look at the Additional Information paragraph.

  • IPod not recognized in iTunes 7....continued, what I've done so far.

    My iPod mini is not recognized in iTunes 7...but it recognized by Windows and this problem persists on all computers which makes me think it's the software on my iPod since it plays perfectly and charges up every time.
    I have tried the following:
    1. Resetting
    2. Changing the Drive Letter from E to I
    3. Deleting the Temp folder (as per an article's instructions) but some files would not delete.
    4. Optimizing the drive with Norton Systemsworks
    5. Changing USB ports
    6. Removing and reinstalling iTunes.
    I have read suggestions to do "Error-Checking" I found this by right clicking on the drive and clicking properties and then tools. There are two options here: "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors". What should I do? Why would I want to recover "bad sectors"?
    Before this first started, I started up my computer when my iPod was plugged in and got this blue screen message:
    Checking file system on E:
    The type of the file system is FAT32.
    The volume is dirty.
    Volume Serial Number is 4360-F78C
    Read failure with status 0xc000009c at offset 0x79c000 for 0x1000 bytes.
    Read failure with status 0xc000009c at offset 0x79c000 for 0x1000 bytes.
    Folder \iPod_Control\Music\F03 has bad clusters.
    Bad clusters removed from folder.
    Unrecoverable error in folder \iPod_Control\Music\F03.
    Convert folder to file (Y/N)? Yes
    Convert lost chains to files (Y/N)? Yes
    507633664 bytes in 82 recovered files.
    Windows is verifying free space...
    Free space verification is complete.
    Windows has made corrections to the file system.
    4038922240 bytes total disk space.
    335872 bytes in 29 hidden files.
    24576 bytes in 6 folders.
    2213265408 bytes in 519 files.
    4096 bytes in bad sectors.
    1825288192 bytes available on disk.

    The solution was worked out on this thread:
    http://discussions.apple.com/thread.jspa?threadID=941509&tstart=0

  • Ipod not recognized in itunes.  i have tried "everything". please help me

    ipod 4th gen not recognized in itunes, windows 7.  I've tried reinstalling itunes, bon jour, quick time etc.  can anyone help?  Thank you for any advice.

    is it plugged directly into the computer? are your usb drivers up to date? what kind of antivirus do you have>Disable it if you have it
    -do you have anything else plugged in like a printer or camera?!
    These article should help though 
    http://support.apple.com/kb/TS1496?viewlocale=en_US
    http://support.apple.com/kb/TS1369

Maybe you are looking for

  • Long time buyer truly disappointed - My bad experience

    On 10/28/2014 I bought a Sound bar, 75” TV and a 2 year warranty for roughly $7,100 at the Best Buy location in Arden-Fair, Sacramento, CA 95819. The sales rep who sold me the TV was named Jesse and was very helpful and professional, he made my decis

  • 'Help' in PSE12 doesn't work

    When I click on the "Help" button (F1) this is the message I get "This webpage is not available"

  • Problem With Workbook

    Hi Guys     I have a problem when one workbook. I made the following steps. 1. I have in BW Dev. the workbook with the 2 queries. 2. I create a Role with this workbook. 3. I made 2 transport orders with the Workbook & Queries and the roles. In BW QA

  • Archiving documents having open item managed accounts

    Hi All, We have a requirment to archive accounting documents older than 2 years. I would like to know if it is possible to archive those accounting documents which have postings on open item managed accounts. Example: If I have an accounting document

  • Can't Upgrade from 10.4.11 to 10.5.4

    Have an iMac with intel processor 1.83 GHz, 512MB memory, version 10.4.11. Trying to upgrade using 10.5.4 using Install Discs from other computer but message says the software can not be installed on this computer. Not sure why not.