IPod not recognized by laptop's USB 1.0 port

There are a couple of problems here. I have an external hard drive that can only be accessed with a USB 2.0 cable. I had to buy a card with USB 2.0 ports since my laptop only has USB 1.0. When I try to update the iPod (plugged into the USB 2.0 card as well as the external hard drive), everything freezes, goes very slowly, and I can't transfer songs from the external hard drive.
When I unplug the external hard drive I can update songs from my laptop's hard drive, but the iPod has to be plugged into the USB 2.0 card. When I plug the iPod into the laptop's USB 1.0 port (regardless of whether the external hard drive is connected) the iPod is not recognized, it only gets charged.
I tried this iPod on a different computer last night and it worked great.
So two questions: 1) how do I transfer songs from my external hard drive (get my computer not to freeze) and 2) how can I make my laptop recognize my iPod when it's plugged into the laptop's USB 1.0 port?
Thanks a lot

Well... from what i am reading about your post, you want to transfer your music from the external hard drive to your laptop. if this is correct then i think that you should open the hard drive into a window and put all the music into 1 folder and drag it onto your desktop, then once the music is downloaded onto your laptop, (if there is enough space) unplug the external hard drive and use the USB 2.0 port 4 your ipod w/o the hard drive. sometimes when i plug my ipod into my PC it will stop everything for 5 minutes then it starts to work. so i recommend to plug it into the 2.0 and wait a while and see what happens.
  Windows XPee  

Similar Messages

  • IPOD not recognized via USB - A lot of trouble shooting already done.

    I got a new 80GB iPOD to replace the 4th gen 40GB that just died (HDD issue). I cannot get the computer to recognize it via USB. I had the same problem with my 40GB via USB, however it would usually work via firewire. This new one will not let me use firewire, so I am forced to try to resolve the issue. I know this has come up before on here and I spent about 3 hours last night going through old 'USB Device Not Recognized' posts, but could never find anything similar. This is where I stand. Any help would REALLY be appreciated, because I am pulling my hair out over this.
    All previous Itunes have been deleted and Itunes 7 has been installed. This is on WIndows XP Pro.
    1. I know it is not a defective IPOD or USB cable because I brought them to work (a non Itunes machine) and plugged it up. IPOD was immediately recognized as IPOD /USB Mass Storage Device.
    2. I know it is not the USB port at home because I plugged other devices (Klipsch Promedia speakers / Mouse / Keyboard) into the same port and they worked. Incidentally, this is a front USB port, however, I get the same result if I use a rear port.
    3. It is not recognized in Itunes or in 'My Computer'. Only recognized as 'unknown device' in Device manager.
    When I plug it up at home, it goes through all the 'new hardware detected' crap and then 'you new hardware is ready to use', but then after about 3 seconds, I get the 'USB Device Not Recognized....USB device has malfunctioned ....'. message. If I go to device manager and uninstall it and then retry. I get the same thing. Even f I reboot between tries.
    So, I have pretty much ruled out a hardware problem. I think I read on here somewhere (or a link from Apple) that there was a Microsoft hotfix issued for this issue last year sometime (I think it was a SP2 compatability issue), however, I cannot find the fix. The link I had talks about the hotfix, but there is no file. Also, since the issue first appeared last year, I would think it has been resolved in one of the updates since then.
    PLEASE help me out if you can. Thanks!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • 1st generation iPod not recognized on Vista - drivers / hardware not found

    I have a new PC, which now very unfortunately runs Windows Vista as an operating system - I have installed iTunes latest version 7.4 but still the PC does not recognize my iPod or doesn't find the hardware - can anyone help?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • Ipod not recognized by computer or itunes plaese help

    Hey I have had my ipod since last december and around april it stopped working and responding to my computer. it does charge but now it can only hold a charge for a certain amount of time. Can sum one help me?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • Ipod not recognized anymore

    My old laptop used to recognize my ipod using usb but only when it was fully charged and even then it would only recognize it some of the time. It also wouldn't ever charge through my computer and the ipod updater never worked. Eventually, that computer stopped recognizing it all together and I didn't even get the do not disconnect screen. In the meantime, I picked up a new laptop thinking maybe I had bad usb connections but I still have the same problem. I have lost all of my music files off of Itunes (due to my own fault of reinstalling windows without backing up my files thinking that might fix) but still have them on my ipod. Is there any way to back up my ipod and how do I restore it (or back it up) when it isn't recognized my my PC? I have tried new cables etc. and am convinced the problem is with my ipod. Any ideas?
    Toshiba Satellit   Windows XP  

    hi jpratt!
    given that you've got a Toshiba, we'd probably better check up on this issue first:
    iPod not recognized correctly on Toshiba laptop
    keep us posted.
    love, b

  • Ipod not recognized by Itunes, please help!!

    Hi,
    When I connect my ipod to my computer the follwing message comes up-
    "USB device not recognized- One of the USB devices attatched to this computer has malfunctioned and windows does not recognize it."
    I've tried everything I can think of... downloading the latest software updates and the latest versions of itunes etc but still no progress.
    When I attempt to configure the ipod using the software supplied with it or one of the software updates issued on the site the ipod and computer both freeze and nothing happens.
    The Ipod is recognized by my computer but there is no sign of it in itunes.
    Has anyone got any suggestions!?
    Any ideas would be greatly appreciated,
    Thanks, James

    >I should mention that on my second try installing it I was able to upload songs to it, however it seemed that the songs I unchecked made it and the checked ones did not.
    Hmmm... it may have to do with the song format?
    iPod: About compatible song formats
    Let us know,
    Gary

  • Ipod not recognized by itunes, why?

    I got a new Ipod and it is not recognized by Itunes. I have reinstalled itunes. I have tried to reset the ipod. It also does not show up on Windows Explorer. I tried changing things in the MSCONFIG file and it still did not work. The USB ports work and I have checked that by plugging in an external HD. Any suggestions?

    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows

  • New iPod not recognized in Vista PC and no devices in iTunes

    Hello, plugged iPod Touch into computer and Vista showed usual little box which said automatically located drivers and installed them. But couldn't find iPod in My computer. Installed iTunes from download area. No devices in left column.
    Reinstalled iTunes from fresh download. Plugged iPod in every USB point on computer, but nothing happens. IPod not found or recognized.
    Tried to find USB driver in Device Manager but all have generic names and so can't identify which driver was installed for iPod. None show installation date or anything which may identify which one. Also forgot to create restore point first (kicking self - always do this normally before installing something new).
    Been through Apple help pages and tried all their ideas including reinstalling. Still nothing found.
    Could someone please suggest what to do, besides dropping computer out of window?
    Many thanks
    Phil Chave

    I would try this:
    http://support.apple.com/kb/TS1369
    (iPod not recognized in 'My Computer' and in iTunes for Windows)

  • Possible solution to iPod not recognized in Windows

    I myself have a Mac, but for that last week, since Xmas, have been trying to help a friend get her kids' iPods (Xmas gifts) to work with her Windows machine. She has a Dell with Windows XP. Her whole system is 2-3 months old.
    We experienced the same problem as many. iPods not recognized by her system. We tried everything, the 5R's, prayers,tears, voodoo, human sacrifice (Bob from GeekSquad), everything.
    Long story short, she discovered that if she disconnects her printer (a Lexmark all-in-one) from it's USB port, and then connects the iPods, the iPods are recognized and funcion normally with the system. She restarts her computer between disconnecting the printer and connecting the iPods. Not sure if that step is necesary at this point. Must be some sort of hardware/software conflict.
    Just wanted to let everyone know in case this worked for them.
    Mac   Mac OS X (10.3.9)  

    I don't usually reply in discussion sites, but after about 20 hours...doing the R's over and over, Applecare not being able to help, and one step away from giving up...I just had to say thank you! I tried everything...except removing my printer and scanner to see if they were conflicting...after I read your note, I tried, and it finally worked. Thank you so much...I really appreciate the suggestion...and my headache has seemed to go away!!! Hope that you have helped other people's stress as well! Happy New Year!
    HP   Windows XP  

  • Ipod not recognized by itunes, iphoto on either of my macs

    Ipod is not launching in itunes, or iphoto with either imac or macbook. Have tried restarting both macs, restarting ipod holding both buttons, tried different usb wires and ports.  Any ideas?

    iOS: Device not recognized in iTunes for Mac OS X
    Does it charge?
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • IPod not recognized by new computer

    I downloaded iTunes and plugged in my 2009 ipod into my new computer. It is not recognized. Message says: USB device not recognized.  It is fully charged and contains music I don't want to loose. Please advise on the steps to correct this. Thank you!

    Hi LoisPadgett,
    Thanks for using Apple Support Communities.  If iTunes doesn't recognize your iPod classic, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • IPod not recognized (for sync OR charging) after OS 4 upgrade

    I upgraded to OS4 on Saturday July 10th with no problems. On Sunday (July 11) I used my iPod quite a bit. I was at a friend's house and the battery was getting low so he charged it through his computer. It charged completely and we continued using it the rest of the day. I plugged it in to my PC to charge it Sunday night and it was not recognized at all (for charging OR for syncing) through any of the USB hubs. I asked my friend the method he used to charge it that day and he confirmed it was via computer. Monday night I tried charging it through a friend's iMac. It charged halfway, though it still wasn't recognized. Tuesday morning I tried to charge it on the same computer and I got the "too much power drawn from the USB hub - HUB deactivated" message on ANY of the HUBs. It still doesn't work on my own home computer (though it HAD been working Friday night and Saturday morning pre-OS4 installation).
    I'm personally running Ubuntu 10.04 but obviously only was able to charge the iPod on that system. Anytime I want to sync or download music I restart to Windows Vista (and iTunes).
    I do also have apps installed, but nothing new from the previous OS - (I know that blaming third party apps is a common cop-out answer for apple techs).
    I hope this wasn't too confusing. My real problem is simply described by my subject line: iPod not recognized (for sync OR charging) after OS 4 upgrade. What follows is simply everything I've done to troubleshoot. The only thing I haven't tried is restore...because my iPod isn't even recognized by iTunes.
    I would greatly appreciate any help or stories related stories/situations. Strength (and hopefully solutions) in numbers!
    Best,
    Dan

    Assuming you haven't got the cords mixed up with another, older iPod, it sounds like you have a couple of problems:
    1. Your computer's USB ports have quit working. Reboot your computer and see if they reactivate.
    2. Your friend's iMac generated that message because you tried to charge the device from the low power keyboard USB port. iPods need to be charged off one of the main USB ports or a powered hub.
    3. iPods not being recognized by iTunes can be caused by 1) wrong cable; 2) non-functioning USB ports; 3) iTunes not being the correct version for the iPod OS; and finally 4) Apple Mobile Device Services driver is either stopped, missing, or disabled.
    To troubleshoot a problem with Apple Mobile Device Services, see the Apple support article: http://support.apple.com/kb/TS1567

  • IPhone 4s is not recognized by laptop even when it's on recovery modeb

    I Have been having problems with my iPhone 4s lately it doesn't charge either by the plug or the laptop and have used many different laptops but still it doesn't work I have tried to force it to recovery mode but still it says it's not recognized what do I do please help, I'm also using the latest version of iOS

    Hello Sibongile22,
    If your iPhone isn't being recognized in iTunes, you may find the troubleshooting steps outlined in the following article helpful:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If your iPhone still isn't charging or responding, you may also find these articles useful:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    - Brenden

  • Why is my ipod not recognized in itunes and content appears to be lost

    I recently connected my ipod to charge, when itunes did not come up I found that it was open by another user on our pc. I went to close itunes from there session But it was frozen. I had to press control alt delete to end task. When it closed I opened it back up in my windows session and found all my content was lost and it didn't recognize my ipod. itunes wants to reset all settings to factory and delete any content that may still be on there. When the ipod is ejected it shows nothing on there but when i plug it in show my ipod name, and some content appears to still be there, in my computer in usb port (G:). Please help I hope I didn't loose all my music!!!

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Why is my iPod not recognized in iTunes?

    Why is my iPod not recognized in iTunes?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

Maybe you are looking for

  • Info cube data doesn't match with R3

    Hi, We are using "0AFMM_C02" Info cube for Inventory data. for some records its not fatching data for distribution channel. I checked the update routine for Distribution Channel. PROGRAM UPDATE_ROUTINE. $$ begin of global - insert your declaration on

  • Publishing Business Objects Reports in Portal

    Hi All, 1. In BO we have different reports like, web intelligence, crystal, deski reports. By default sap provided two iviews         A) Business Objects Enterprise Integration Kit - IView Template         B) Crystal Enterprise Report By using Busine

  • Report server configuration

    Hi I want to configure report server in Oracle10gAS(10.1.2)in LINUX 4 so that I can run reports through browser, which were compiled in Reports2.5 . So kindly help me through details informations , means - what are the files to be configured and how?

  • How do I copy a time machine backup onto my old computer after I've replaced the hard drive?

    Hi everyone, I own a MacBook that I purchased in 2009, and it's served me very well since then; the only exception is that the hard drive suffered after I dropped the computer, and I had to replace it last month. The old hard drive is now useless, an

  • SAP Controls tutorial code problem

    Hello all, I'm working on a SAP tutorial and I can't get this piece of their code to work.  We're on version 4.7, basis version 6.2. This is a link to the tutorial and here is a segment of code that does not pass the syntax check.  http://help.sap.co