Ipod not recognized in itunes, error message: repair disk

When I connect my ipod to my mac I get an error message saying my mac cannot repair the disk, its asking me to back up the disk and reformat asap.  My ipod is not being recognized in itunes but it is in the finder.  help!

Thank you so much for trying to help.  When I tried to do that, I got this error message when I tried to verify and repair the disk:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
How do you go about doing that ^ as in reformating the disk (all of my music is backed up to a hardrive already)  Or should I just try and erase the info on my ipod?
Thanks for your help!!!!
-P

Similar Messages

  • HT1363 ipod not recognized in itunes, even while in disk mode

    My ipod classic is not recognized in itunes.  I tried resetting it, reinstalling itunes and even put it in disk mode.  Still it doesn't show up.  What else can I try?

    Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod not recognized, getting odd error message

    I've seen this posted a few times, but without any hints as to how to fix the problem.
    I have a 4G 20GB iPod, just over a year old (meaning, no warranty), that has worked fine until this morning. I turned it on, and all of a sudden, it kept skipping through all of my songs, and wouldn't respond to the pause, play, etc. buttons.
    I attached it to my computer via FireWire, and I keep getting this odd error message: "You have inserted a device that has no volumes that OSX can recognize" It asks me if I want to ignore, initialize, or eject the disc. I've been having it ignore it, or eject it (staying far away from initialization). After I ejected it, I noticed that all the songs on my iPod are now missing.
    I reset the iPod, which didn't do much, and now I can't restore it, because neither the computer or iTunes recognizes my iPod. It shows up in Disk Utility, but I'm not entirely sure how to proceed.
    What happened to my iPod? I can't seem to find anything in the Apple support pages that seems similar to my situation. Any suggestions on how to get the thing to work again?
    Edit: I am using iTunes version 4.9; I have not updated to 5.0

    This is the most frustrating tech trouble!
    The same thing has happened to my iPod. It worked fine, then one day I plug it in and it says "Disc inserted is unreadable by this computer". As far as I remember, I didnt' update anything, make any changes, or adjust any settings to any of my hardware. SO WHAT HAPPENED?? And now I can't restore or doctor the iPod hardware bc my computer won't recognize it as actual hardware...
    pleeeeease help, if anyone has a way to fix this.
    The weirdest part, is that when I look at the information of the "unreadable hardware" it describes it with all the information, like how many gigs are available, how much space is used up, latest updates etc. So it can transfer information, but it pretends its unreadable? i dont understand.

  • TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

    I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working.  Finally got iPod software to properly install. Please help!

    Did you try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Ipod not recognized by itunes

    My ipod mounts on the pc, itunes does not see it. An error pops up saying that the ipod is write protected...???? I restored it, reinstalled, rebooted. Not sure what other steps to take.. Thansk for any help.

    Hello Jennifer,
    Thank you for using Apple Support Communities. 
    Sorry that your iPod isn't recognized. The following articles should help you sort out what is going on and get your iPod working again. I didn't see if you are using OS X or Windows, so I included the articles for each. 
    If you don't see your connected device in iTunes for Mac - Apple Support
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Regards,
    Jeff D. 

  • Why is my iPod not recognized in iTunes?

    Why is my iPod not recognized in iTunes?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPod not recognized in iTunes 7....continued, what I've done so far.

    My iPod mini is not recognized in iTunes 7...but it recognized by Windows and this problem persists on all computers which makes me think it's the software on my iPod since it plays perfectly and charges up every time.
    I have tried the following:
    1. Resetting
    2. Changing the Drive Letter from E to I
    3. Deleting the Temp folder (as per an article's instructions) but some files would not delete.
    4. Optimizing the drive with Norton Systemsworks
    5. Changing USB ports
    6. Removing and reinstalling iTunes.
    I have read suggestions to do "Error-Checking" I found this by right clicking on the drive and clicking properties and then tools. There are two options here: "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors". What should I do? Why would I want to recover "bad sectors"?
    Before this first started, I started up my computer when my iPod was plugged in and got this blue screen message:
    Checking file system on E:
    The type of the file system is FAT32.
    The volume is dirty.
    Volume Serial Number is 4360-F78C
    Read failure with status 0xc000009c at offset 0x79c000 for 0x1000 bytes.
    Read failure with status 0xc000009c at offset 0x79c000 for 0x1000 bytes.
    Folder \iPod_Control\Music\F03 has bad clusters.
    Bad clusters removed from folder.
    Unrecoverable error in folder \iPod_Control\Music\F03.
    Convert folder to file (Y/N)? Yes
    Convert lost chains to files (Y/N)? Yes
    507633664 bytes in 82 recovered files.
    Windows is verifying free space...
    Free space verification is complete.
    Windows has made corrections to the file system.
    4038922240 bytes total disk space.
    335872 bytes in 29 hidden files.
    24576 bytes in 6 folders.
    2213265408 bytes in 519 files.
    4096 bytes in bad sectors.
    1825288192 bytes available on disk.

    The solution was worked out on this thread:
    http://discussions.apple.com/thread.jspa?threadID=941509&tstart=0

  • Ipod not recognized by itunes or windows.

    Hi there, I have an 80gb Ipod classic which is not recognized by itunes or windows. The "Use iTunes to restore" message appears on my ipod but when I connect it to my pc itunes does not recognize it. Windows shows a message informing me that I need to format the drive but is then unable to do so. Ipod will not go into disk mode either. I have tried reinstalling itunes and using the ipod in a different usb drive. I have also connected it to a mac and a windows pc but nothing happens. I have tried to use the diagnostics mode on the ipod but that will not work either. I am wondering if my ipod's hard drive is corrupted.

    Hello,
    My iPod is not being recognized by iTunes or internet
    explorer. It used to, but not anymore. It just
    dosent show up when I connect it to my computer.
    Also, the "do no disconnect" sign does not appear on
    my iPod when I connect it. It is still able to
    recharge, though.
    have u tried a different usb port?
    I read that I have to restore it. I have tons of
    songs in my iPod that I do NOT want erased! How can
    I back these songs up? I have some songs on my iPod
    that are from another person's computer, so if they
    get erased, the songs are gone forever.
    try this http://www.copypod.net/
    Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

  • HT1925 ipod not recognized in itunes or my pc

    my ipod shuffle 3rd is not recognized in itunes or windosw. i have uninstalled ituens and installed, switched usb ports ...help!

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Ipod not recognized by itunes or laptop

    i have an ipod touch 4g and i can't get it to be recognized by my sony vaio laptop.
    i recently got a new laptop and just finished transferring my itunes library over to it.
    i went to sync my ipod, but i had endless problems with my old and new library. long story short, i reset it completely.
    on my ipod, i set everything back to their old settings and whatnot, but when i went to sync it, my ipod didnt show up in my computer or itunes.
    i restarted, checked for updates, and all that with amds and itunes. i followed every suggestion from apple support, troubleshoot, and ran diagnostics from itunes. the diagnostics still say that there is not an ipod found.
    on its own, my ipod functions correctly and recognizes to be charged from my usb port. itunes and windows wont recognize it though
    is there anything else i can do? this is really frustrating me.
    thanks!

    - So you tried everthing here:
    iOS: Device not recognized in iTunes for Windows
    - Does it charge?
    - Have you tried another cable?
    - Try a known good compuuter.
    - Reset the iPod, nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Make an appointment at the Genius Bar of an Apple store.

  • Ipod not recognized by itunes but is by iphoto

    Hi,
    My ipod is not recognized by itunes (it's does not appear in the left section) but it is in iphoto (aks me if I want to import 15 elements).
    I have follow the instructions bellow with no success.
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Can someone give me a hand please,
    Ipod touch 2 gen
    Mac OS 10,6,8
    itunes 10.5.2

    Have you tried the this part of the omne link you post:
    Additional Information
    In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.
    The link you provided is confusing since the first line give you the link for Windows and second for a Mac.

  • Ipod not recognized by itunes, why?

    I got a new Ipod and it is not recognized by Itunes. I have reinstalled itunes. I have tried to reset the ipod. It also does not show up on Windows Explorer. I tried changing things in the MSCONFIG file and it still did not work. The USB ports work and I have checked that by plugging in an external HD. Any suggestions?

    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows

  • IPod NOT recognized in iTunes...'Recognized' in My Computer...W7

    Hello, just joined community, my name is Dominick, glad to be here.
    So all of the sudden my iPod is NOT being recognized by iTunes.  I have the most recent version of iTunes.  I am running Windows 7 64-bit on my Lenovo Laptop.  Long story/synopsis below...
    It is being recognized in 'My Computer.'  It is recognized as "Removable Disk."  If I click on it, it then says "You need to format the disk in drive G [USB port its in] before you can use it".  Then asks me if I want to Format Disk or Cancel.  However, if I ask it to Format disk, it fails to do so every time.  After failing, it then says...
    "Windows can't Format G...Check to see that disk and drive are connected properly, make sure that the disk is not read-only, and then try again.  For more information, search Help for read-only files and how to change them."
    Can anyone provide some clarity on this statement?  Can I change its properties to read-only and will that work?
    Again, my iPod is NOT being recognized in iTunes, so I cannot restore it.  I figured that would be my best solution at this point.  When I run Diagnostics in iTunes and run the "Device Connectivity Tests", it tells me all 3 Support Services are working/green amd 2 of the 3 Ports are working/green...the only not working/red item is "No iPod...found", which of course just means itunes cant recognize my iPod when plugged in...back to square 1.
    Also, I came across the Apple page dedicated to troubleshooting an iPod that is NOT recognized in iTunes, but is recognized in My Computer. 
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    However, after exhausting all options listed here, my iTunes is still not recognizing my iPod.  I then tried uninstalling iTunes and all its component programs, e.g. Quicktime, Bonjour, Apple Device Services, etc. and reinstalling and this did not work.  I then tried plugging in my iPod into a friend's computer with latest version of iTunes and that didn't work either.
    To provide a little more background on how I got here, my iPod was acting funky over the past 2 weeks...meaning it would be slow to response, random songs would freeze/not play, and then start playing again, or freeze altogether, then I'de have to reset my iPod by pressing Menu and middle-button...I was planning on restoring it yesterday just to fix its minor issues that at the time were just annoying...but as fate would have it, here I am now...
    When I plugged it into my laptop to Restore it yesterday morning, it took a LOOONG time for iTunes to recognize it, then iTunes told me the iPod was corrupt and I should Restore it...well, being an ignorant peion that I am, I instead disconnected it and tried Resetting it again to see what that would do...it then was totally frozen, wouldnt respond to pressing Menu and middle button to Reset iPod, and wouldnt get recognized by iTunes or My Computer when I plugged it in...once the battery died, I was able to charge it up, all the music and files were gone, and I had to select a language...I then plugged it into my Laptop to see what would happen, and per above, here I am now with iTunes no longer able to recognize iPod, but My Computer can, and everything else per above.
    I've tried EVERYTHING I can find under the sun to fix / Restore my iPod / get iTunes to recognize it.  Any last-ditch efforts from the Apple Community?  Again, I already exhausted all options I can think of / find, including per link above...http://support.apple.com/kb/TS1363?viewlocale=en_US....my hope is mebbe someone else here can provide another option that will magically work or can decipher what my Computer is telling me per above when it fails to Format my iPod.  Otherwise, this iPod is probably now FUBAR...
    Hope that makes sense.  Please lemme know any thougts or questions.  you may have.  Thank you for your time.
    Dom

    From the Classic iPod manual.
    To reset iPod classic:
    1 Toggle the Hold switch on and off (slide it to HOLD and then back again).
    2 Press and hold the Menu and Center buttons for at least 6 seconds, until the
    Apple logo appears.

  • 2nd generation touch ipod not recognized by itunes or Macbook

    2nd generation touch ipod is no longer recognized by itunes. The ipod has been reset and the only screen image is the itunes icon with an arrow and a USB cord connection pointing to the itunes icon.

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If you have Snow leopard do not forget to look at the Additional Information paragraph.

  • Ipod not recognized in itunes.  i have tried "everything". please help me

    ipod 4th gen not recognized in itunes, windows 7.  I've tried reinstalling itunes, bon jour, quick time etc.  can anyone help?  Thank you for any advice.

    is it plugged directly into the computer? are your usb drivers up to date? what kind of antivirus do you have>Disable it if you have it
    -do you have anything else plugged in like a printer or camera?!
    These article should help though 
    http://support.apple.com/kb/TS1496?viewlocale=en_US
    http://support.apple.com/kb/TS1369

Maybe you are looking for

  • Upgraded to ITunes 6.0.1 and now it no longer plays music on my G4 Cube

    Does anyone know the solution to uninstall ITunes and do a completely new install instead of upgrade? Like a fool, I let my ITunes be upgraded automatically to 6.0.1 on my G4 Cube running OS X 10.4.3 and now none of my music will play in ITunes. ITun

  • Itunes running in background or not at all

    I've gone through the support site and cant find any useful answers so i was hoping someone here might have a suggestion i havent thought of. Symptoms: after loading itunes i can get one of two things to happen. 1) the computer starts loading somethi

  • Importing photos from photo stream

    Under iphoto, it used to be that photos would be pulled down from photo stream and an album for the month would be auto generated, housing all of the photos for that month that were imported from photo stream. Under the new photos app, I see the curr

  • Converting Multi page .eps files to .pdf Preview is broken

    I have in the past used Preview to convert multi page .eps files into .pdf files. Since I have upgraded to Tiger 10.4.3 Preview will no longer work. Does anyone know how to uninstall Tiger 3.03 version and go back to 2.xx version? Are there any utili

  • Write message in Joblog at Runtime

    Hi, 1. i´m running a batchreport and want to put a message at predefined steps into the Joblog. I used message with Type 'I' or 'S' in my report but the message is only visible when the job is finished. Any ideas to put in a message at runtime. 2. Th