Ipod not reconised by windows, itunes or anythin!! help

ive installed ipod nd itunes on my computer and when i plug the ipod nano in it charges fine and everything, but it isnt showing up on the computer. It comes up with the install driver wizard window, and the driver isnt found on the disk or on the internet, i have tried uninstalling and reinstalling software but nothing is woking!! help!! does my ipod need to be fully charged??
im using a sony vaio desktop computer on windows xp.. and an ipod nano 4gb black
thanks james
  Windows XP  
  Windows XP  

Far as the battery goes, its all estimated. It LARGLY depends on many things, the size of the song ( Like 1 MB size or 9MB size) and the length (The time, like if the songs lastes 3 min or 30 mins) THe settings on the iPod ect ect you can read more about this here http://www.apple.com/batteries/ipods.html

Similar Messages

  • Ipod not recognized by windows, itunes, and will not charge with pc.

    yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
    -1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
    -2nd, windows gave me a message saying the hardware could not be recognized.
    -3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
    i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

  • IPod not recognized by Windows / iTunes

    Hello,
    I hope someone here can help. So far my first experience with Apple support has NOT been a positive impression.
    I searched for info on this problem, but the other ones I see all seem to be related to freezing or battery issues.
    iPod Classic 120GB, I don't sync very often, and just finished doing a bunch of cleanup in iTunes (album artwork, song info, etc.) and want to re-sync the pod.
    When I connect to the PC with the USB cable, Windows doesn't seem to recognize the device, and it doesn't show up in iTunes.
    It is charging through USB, however. The battery is fully charged.
    I tried 3 different USB ports on the PC.
    Tried restarting iTunes.
    Tried restarting the computer.
    Went to Apple support website, tried the troubleshooting assistant:
    Reset the pod.
    *Had already tried different USB ports.
    *Had already trired restarting the PC (Although it mentions checking for the latest software updates - I didn't do this. WHAT software updates should I look for? Device drivers? OS updates? WHAT???)
    Re-installed iTunes. (Was already at v 9.2.1.4)
    *Did not try the restore. Reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
    Also read something about disk mode. I set the iPod to disk mode, but it's not recognized that way, either. When connected by USB in this mode, the iPod screen still says "OK to disconnect".
    I tried the link "iPhone, iPad, or iPod is not recognized by Windows".
    I do not see the "Apple Mobile Device USB Driver" anywhere in Device Manager. I suppose this is the problem.
    However, continuing with the instructions, it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC?????
    (These instructions also say to disconnect the device, but nowhere says when to connect it. Why do they put half-baked troubleshooting instructions on their web site???)
    Is there anyone from Apple support on this list who can help? I believe the driver needs to be reinstalled somehow, but it didn'thappen when i re-installed iTunes, so how do I do this?
    Thanks
    Keith

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

  • IPod not recognised by windows iTunes

    iPod not recognised by windows 8 computer.
    After I recently updated iTunes I plugged my iPod Touch 4th Gen into my windows 8 desktop.
    It was not recognised as an iPod by iTunes, only as a storage device in MS Windows.
    After much searching I identified the problem was there was no apple mobile device USB driver installed.
    I searched for … devmgmt.msc
    Which opened the Device Manager
    In Device Manager, under Portable devices, the Apple iPod should have been listed. It wasn’t.
    So I Right Clicked on ‘Apple iPod’ and left clicked on ‘Update Driver Software’.
    Then ‘Browse my computer for driver software’.
    Browsed to this location … Windows (C) / Program files / Common Files / Apple / Mobile Device Support / Drivers /
    And then clicked on ‘usbaapl64’
    It installed the Apple mobile device USB Driver, as it should have done already, when I recently updated iTunes.
    Could someone check the above to see if I have described the problem and the solution correctly.
    Thanks. Chris KV

    OK, update to try to provide a clearer description of the problem and solution that worked for me.
    Problem.
    After I recently updated iTunes I plugged my iPod Touch 4th Gen into my windows 8 desktop. It was not recognised as an iPod by iTunes, only as a storage device in MS Windows. After much searching I identified that there was no Apple Mobile Device USB driver installed. Without the driver Windows did not recognise the Apple iPod when connected via USB.
    Solution.
    I needed to use the Windows Device Manager, so I searched for … devmgmt.msc (You need to include the .msc) and clicked on it, which opened the Device Manager in a new window.
    In Device Manager, under Portable devices, the Apple iPod should have been listed. It wasn’t.
    So I Right Clicked on: ‘Apple iPod’ and left clicked on: ‘Update Driver Software’.
    Then clicked on: ‘Browse my computer for driver software’.
    Then clicked on browse and drilled down to the following location on my hard drive:
    C:\Program files\Common Files\Apple\Mobile Device Support\Drivers /
    And then clicked on ‘usbaapl64’
    This installed the Apple Mobile Device USB Driver.
    Now Windows recognises my iPod again.
    PS. I can’t remember if I had to restart the computer once the device driver was installed. But if the above doesn’t work for you, then at the end, try restarting to see if that finishes the installation of the device driver. Good luck
    ChrisKV

  • Re: iPod not recognized by Windows / iTunes

    My 80gb iPod classic is recognized by my PC (Windows XP) but not in iTunes. I have gotten iTunes to give me a prompt to restore the iPod, but after that when iTunes says that the iPod will restart and will appear in the left-hand pane, it never does, and I get an iTunes message that there is an improperly connected iPod detected.
    I've uninstalled and reinstalled iTunes (I also have an iPhone, so I can't downgrade to an old version of iTunes), restarted my computer, tried connecting the iPod in disk mode, etc. I ran CopyTransDoctor and got a message that the iPod is corrupted. Same with trying to defragment the hard drive in the iPod using the Windows utility. Once that has happened, is there any way that the "geniuses" at the Apple Store can save my iPod? Or am I going to have to shell out another $200+ (this is my second iPod--my iPod 3rd Gen died in 2007) on a product that seems to only have a lifespan of 3 years?

    Start here:
    iOS: Device not recognized in iTunes for Windows

  • IPod not recognized by Windows / iTune

    When I connect my iPod using USB 2.0, I now get a "USB device not recognized" error on Windows XP. iTunes also does not recognize that iPod is connected.
    I believe this problem may have been caused when my iPod was connected to a friend's speakers. When it first connected, the following error message appeared:
    "FireWire connections are not supported. To Transfer Songs, connect the USB cable provided".
    After pushing the Selct button to gt rid of the error, iPod worked fine in the speakers and continues to work fine with my FM tuner and other devices.
    I've tried the following to fix this problem:
    1. 4 of the 5 Rs. (Can't find a way to restore as I can't get iTunes to recognize my iPod).
    2. Reinstalled iTunes.
    3. Simple restart on computer.
    4. System restore on computer.
    5. Tried to update USB drivers.
    6. Tried to load iPod in disk mode.
    7. Went through all of the Apple Support articles for this problem and tried all of the reccomended steps.
    As mentioned, my iPod works fine otherwise and I'd hate to have to send it away to be repaired if there is a simple fix. Also, my wife's Nano is working without problem on the same PC, so I have a feeling that this problem is iPod related rather than PC related (though, I could be wrong!)
    Does anybody have any suggestions?
    Is there a way to restore iPod manually (i.e. without iTunes)?
    30 gb 5th gen.   Windows XP  
      Windows XP  

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • Desperate plea: ipod not recognized by Windows/itunes

    I apologise ...
    for being yet another forum user who pops up with a desperate plea.
    I am fairly geeky and done everything I can think of.
    I have 2 ipods. One is a brand new video ipod, the other a 2nd generation. Both ipods work on one one laptop, my video ipod refuses to work on my Sony Vaio (whereas the 2g ipod is fine)
    Specifically: I connect via USB and a "not recognised ... device malfunctioning" error occurs. Using exactly the same USB port, cable and a different (the 2g) iPod it works fine.
    I have removed and reinstalled itunes and ipod updater.
    I went to the mac store's "genius" bar and the ipod was given the all clear.
    So, there's clearly a conflict between my video ipod and my Sony Vaio (running XP: have tried this with and without SP2) My question is what should I try next?
    I've done everything I can think of, and as the other ipod works (and this video ipod works with other systems!) I am at a loss at to which variable to try next.
    I apologise for bothering you regulars, but rest assured significant googling and more have turned nothing up ...
    I wait in hope!
    To make a little clearer as my post was not particularly eloquent: my 2g ipod works fine using the same USB cable and USB port. The 5g is not recognised. I am trying to establish the variable between these so I can fix it. Any ideas?

    Thanks for the speedy response.
    I am afraid, no, there are no errors when nothing is plugged in or, indeed, when the 2g iPod is plugged in. I've followed other threads on here and been sure to have usbstor.inf etc all in place.
    When I plug in the 5g, windows says a device attached to the system is malfunctioned or unknown. In device manager it says the device is unknown.
    The ipodservice is running and all other software and processes are there/have been reinstalled/restarted etc. I've done every I can logically think of!
    I am really at a loss as to why my 2g iPod works and my 5g iPod won't. Annoyed as well, obviously, as the Mac store formatted my iPod today during the troubleshooting. Thus this morning I had 25GB of music and no ability to update, now I have 0GB of music and no ability to update (I still have all the music on my laptop, I mean simply I can't get it on to the iPod at the moment)
    Can anyone think why one iPod works and one doesn't? Is there anything in the USB 1.1 or 2.0 side of things that could be playing up?
    So grateful for any help!
    Tom

  • Ipod not showing up on itunes?? Help please ASAP.

    I am having some problems with my nano. I plug it into my computer and go to itunes. My ipod does not show up, and I can't charge or sync it. This has never happened before...
    Please Help!

    I just started having the same problem, also. I plug in the IPod, and my computer tells me that the IPod USB Driver "has not passed Windows Logo testing to verify its compatibility with Windows XP" (whatever that means). I tried, for hours, using the tips provided by Mac (e.g. the 5 R's, and re-installing the driver) to no success. If anyone can provide help, it would be much appreciated.
    This problem literally started today. (I even tried re-installing ITunes to no avail!)

  • Ipod not showing up on itunes or computer when plugged in

    Trying to sync my ipod touch, but when I plug it in it doesn't show up on my itunes or on my laptop, a prompt just comes up saying something about the camera. I have windows 8. I need help, I don't know how to fix this problem by myself.
    I also have a problem, syncing new songs onto my ipod touch, it wouln't let me put my new cds on it, so if someone can help me fix these problems it would be greatly appreciated! Thanks!

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod not detected by Windows or iTunes!!

    I bought a new iPod Video days ago but it's not detected by Windows/iTunes!!
    However, it worked when I connected my old ipod mini...
    Any reply would be appreciated.

    hi,
    try the following article my friend...it will definitely resolve your problem..
    http://docs.info.apple.com/article.html?artnum=302420
    http://docs.info.apple.com/article.html?artnum=61711
    Regards,
    Sam

  • My ipod 3rd generation is not recognized by windows/itunes,please help

    My ipod 3rd generation is not recognized by windows/itunes,please help. Have tried restoring a number of times but did not work, any suggestions?thanks

    Start with this Apple support document.
    http://support.apple.com/kb/TS1369
    B-rock

  • Hey Apples Users, my iPod 80 GB ins not showing in windows, itunes and my computer

    hey Apples Users,
    my iPod 80 GB ins not showing in windows, itunes and my computer
    Could anyone in there show me the best solution for the same
    thanks in advance

    First of all does, the iPod power on okay? 
    Have you tried plugging the iPod into a different USB ports, preferably a high powered USB 2.0 port on the back of your PC tower (these are directly soldered onto the motherboard and receive much high outputs of power than the ones on the front).
    What about a different USB sync cable?
    What shows up on the iPod's screen when you connect it?  Does it charge at all?  Maybe try resetting it with it still connected to your PC.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Ipod will not show up, in iTunes library please help.

    Ipod will not show up, in iTunes library please help.
         I just updated to the newest version of ITunes well, not just but a few days ago. Anyway I have windows 8, and in ITunes my Ipod 5th gen will not show up. I have tried somethings such as unpluging repluging, going to services and restarting, basiclly everything on yoyutube, none still work. It's ***** to cause I just wanted to put music on my Ipod, if anyone has an idea of what to do please give some suggestions.
    Thank you, for trying to help.

    Hello Stephen19wfwake,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    1. Try the iPod troubleshooting assistant:
    If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below.
    2. Restart the iPod Service
    3. Restart the Apple Mobile Device Service
    4. Empty your Temp directory and restart
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Change your iPod's drive letter
    7. Remove and reinstall iTunes
    8. Disable conflicting System Services and Startup Items
    9. Update, Reconfigure, Disable, or Remove Security Software
    10. Deleting damaged or incorrect registry keys
    Best of luck,
    Mario

  • Ipod not showing up on itunes or my computer.it recharges when i connect it

    Ipod not showing up on itunes or my computer.it recharges when i connect it but it dosent show up under devices so i cant sync any music!!the screen on the ipod would usually say "connecting"or"do not disconnect"but it dosent say that anymore!!Ive been trying to fix it for DAYS but i cant find a good enough solution.PLZ HELP!!(p.s. i have a 4th generation nano)

    Hey there,
    A file or some files may have become corrupt somehow during connecting or disconnecting the unit. Try putting it into Disk Mode and see if that helps. To put it into Disk Mode, hold the Menu and Select buttons until the Apple logo appears. When it does, immediately press and hold the Center an Play/Pause buttons until you see a confirmation that your iPod has been put into Disk Mode.
    If you are able to do this, it may be a good idea to restore the iPod to its original settings. Keep in mind that by doing this you are erasing all the music and files from your iPod so make sure they are backed up on your computer somewhere. More on restoring your iPod can be found in the Apple document below.
    Hope this helps.
    http://support.apple.com/kb/HT1339
    B-rock

  • TS3540 ipod not coming up in itunes

    my ipod not picking up in itunes help plz

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    -Griff W.

Maybe you are looking for

  • Will the late 2013 Mac Pro boot from an external drive (4Tb, USB 3) with a cloned Win7 x64 partition on it?

    Hello all, I ordered a CTO Mac Pro for heavy rendering and animating work, and I am planning on using bootcamp to install a windows partition (for 3DsMax). As I am now using a HP Elitebook 8770W that has several valuable files and projects on it, I h

  • CG3Z working not open dataset for output

    Hi, I am trying to upload data into the application server for which m using the OPEN DATASET statement. My file name is as follows in lowercase. p_file = '/usr/upi/out/test_20100220.dat'. TYPE c. While trying to execute this i am getting a short dum

  • Some dependencies problem [SOLVED]

    For some days when I try to do an update I get this: :: Synchronizing package databases... testing is up to date current is up to date extra is up to date unstable is up to date community is up to date danimoth is up to date :: Starting full system u

  • Chats in one grouped window, most recent pops up

    Hi I installed Beta because my sister doesnt like IMing, and I don't like texting at work. Anyway-- I have my all of my chats into 1 window, but one thing is really annoying me, how do I stop from a chat going up to the top, when a new message is sen

  • Automatic group switching and notification in Resource Manager

    We are creating resource plans that don't kill out-of-control processes, but automatically move them to a low-priority group for investigation. Is there a means by which a session which gets automatically switched can notify something else, like via