IPod not registering on windows when connected

Hi,
My ipod is connected up to a usb 2.0 port and it just isnt registering. ive tried on another computer with the same result. Has anyone encountered similar problems?
Please help thankyou

I might have an answer....
I had this problem for 5 days and I finally sorted thru 15 articles to get it to work.
1. If you have a lap top go to this support web site and follow the instruction. I had the same problem with my creative media MP3 player.
2. The other useful tip is that the IPOD tries to pick a default drive on your computer and if u are already using that drive for something, then it does not work. To check/fix this...
a. Go to "MY computer"
b. Each drive will have a letter ("c:\")
Write down all of the ones you are using.
c. Right click on the "My computer icon" and select "Manage" from the menu.
d. Under "storage" pick "Disk management"
IT MAY TAKE upto 5 minutes to load!!!
e. Find the ipod in the menu on the right and make sure that the drive letter is not one that you wrote down in step b. If it is, then right click and change it.
f. Restart your computer.
3. IF this does not work, re-install ITunes.
AFter than... keep looking.
I got this stuff off of other discussion page so thanks to everyone who has helped me out!!!

Similar Messages

  • Error message claims iPod not formatted for windows, when it is. HELP!!

    I've had a 4th generation iPod for a couple of years now, and yes this same crappy computer as well. Now all of a sudden, my computer doesn't recognize the iPod as my own. It will show up as hardware, and in my computer just says generically Apple Ipod USB device, not what I had name my ipod originally. If I try to open it up to look at the files that way, which I've done before many times, storing files on it, now it just brings up this message
    "Your Ipod needs to be reformatted for use with Windows. Click update to run the ipod updater to restore your ipod."
    Well, I'm not doing that, because I have files and music on there. From my ipod itself, when I select "About" from the click-wheel, it shows my ipod perfectly fine- with the name I gave it, having the amount of space used that it should, and shows it formatted for windows. All the music is still there- it works in my car. But I can't get to the files now, or add more music because somehow windows doesn't recognize it.
    This started after I updated itunes from 6.05 to 7.02. So then I uninstalled 7 and reinstalled 6. It still doesn't work. I even tried to restore my computer to before I installed itunes 7, in case it's registry keys or something, but it won't even let me do that restore- it's unable to. The iPod software that's been installed is still in my system, unchanged.
    So what can I do? Anyone know? Please help, because I'm at a loss and really, really upset.
    thanks.

    Are you connecting the iPod directly to the computer or through an usb hub .. if you are connecting through an usb hub .. try connecting the iPod directly.
    Is the computer connected to a network or is it a stand alone ... if it is connected to a network try following the below article:
    http://docs.info.apple.com/article.html?artnum=93499
    Try using the iPod reset utility from a different port if that doesn't work try from a different computer.
    If nothing helps, please take the iPod to the nearest Apple Store and they will let you know the further course.

  • Ipod not being recognized/freezing when connected to computer

    Hey all
    My Photo Ipod has stopped syncing with my computer. When I plug it into the firewire cable it just freezes on whatever screen it is on and doesnt appear in Itunes, or under My Computer. I have tried resetting the Ipod while it is connected to the computer, it gets so far as the apple screen and then locks up and stays on that screen till I unplug it. I know the issue is not the dock connector, because it works just fine when I plug it into my FM Transmittor in the car. Any help would be appreciatted.
    Thanks

    Have a read
    http://discussions.apple.com/thread.jspa?messageID=2001071#2001071

  • Why does my iPod not register with iTunes when I plug it in?

    My iPod has been having a continual preoblem, where it shuffles through my entire library, song by song, and stops at each one for about a second each. It has happened a few other times. I plug it into my pc to try to correct the problem, but my iPod doesn't reister with my iTunes. Does anyone know what's wrong? I'm beginning to think I have a defective iPod.

    have you tried resetting it Resetting
    have you read the following:
    http://docs.info.apple.com/article.html?artnum=61711

  • TS1591 my classic iPod no longer appears in iTunes window when connected to iMac.  does this mean my device is no longer supported by iTunes? or incompatible with OSX?

    my classic iPod no longer appears in iTunes window when connected to iMac.  does this mean my device is no longer supported by iTunes? or incompatible with OSX?

    Hello stiannac
    Check out the article below for troubleshooting to get your iPod showing back up on your iMac
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

    Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

    For both
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My MacBook Pro with Retina display displays power point and not other windows when connected to a projector

    My MacBook Pro with Retina display displays power point and not other windows when connected to a projector. Can anyone help out please?

    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • I keep getting ' user not register for online ' when trying to get track names for my CD imports for Windows 7

    I keep getting ' user not register for online ' when trying to get track names for my CD imports for Windows 7 and I'm unable to find a solution.

    I can't be certain exactly which steps are going to be needed in each case, but if you work through this in sequence hopefully one of the steps will prove effective.
    First try this:
    With iTunes closed.
    Press the WinLogoKey+R
    Type in %appdata% and press return
    Double click on Apple Computer
    Double click on iTunes
    Delete the file CD Info.cidb
    Start iTunes and try again.
    If that doesn't work close iTunes and try deleting com.apple.iTunes.Gracenote.plist in the same folder.
    If that doesn't work close iTunes and try deleting iTunesPrefs.xml. This will reset your some of your preferences in iTunes so be sure to check them and reset as required.
    If that still hasn't resolved things close iTunes and try deleting the entire %appdata%\Apple Computer folder or look for parallel files/folders in the C:\Users\<User>\AppData\Local or C:\Users\<User>\AppData\LocalLow in case a corrupt file is persisting there.
    Note that any iOS device backups are stored in the MobileSync folder within Apple Computer. Once things are working you should backup your devices again as soon as possible.
    Or it might not be the preference files after all...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no jo

    i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • IPod not recognised by windows iTunes

    iPod not recognised by windows 8 computer.
    After I recently updated iTunes I plugged my iPod Touch 4th Gen into my windows 8 desktop.
    It was not recognised as an iPod by iTunes, only as a storage device in MS Windows.
    After much searching I identified the problem was there was no apple mobile device USB driver installed.
    I searched for … devmgmt.msc
    Which opened the Device Manager
    In Device Manager, under Portable devices, the Apple iPod should have been listed. It wasn’t.
    So I Right Clicked on ‘Apple iPod’ and left clicked on ‘Update Driver Software’.
    Then ‘Browse my computer for driver software’.
    Browsed to this location … Windows (C) / Program files / Common Files / Apple / Mobile Device Support / Drivers /
    And then clicked on ‘usbaapl64’
    It installed the Apple mobile device USB Driver, as it should have done already, when I recently updated iTunes.
    Could someone check the above to see if I have described the problem and the solution correctly.
    Thanks. Chris KV

    OK, update to try to provide a clearer description of the problem and solution that worked for me.
    Problem.
    After I recently updated iTunes I plugged my iPod Touch 4th Gen into my windows 8 desktop. It was not recognised as an iPod by iTunes, only as a storage device in MS Windows. After much searching I identified that there was no Apple Mobile Device USB driver installed. Without the driver Windows did not recognise the Apple iPod when connected via USB.
    Solution.
    I needed to use the Windows Device Manager, so I searched for … devmgmt.msc (You need to include the .msc) and clicked on it, which opened the Device Manager in a new window.
    In Device Manager, under Portable devices, the Apple iPod should have been listed. It wasn’t.
    So I Right Clicked on: ‘Apple iPod’ and left clicked on: ‘Update Driver Software’.
    Then clicked on: ‘Browse my computer for driver software’.
    Then clicked on browse and drilled down to the following location on my hard drive:
    C:\Program files\Common Files\Apple\Mobile Device Support\Drivers /
    And then clicked on ‘usbaapl64’
    This installed the Apple Mobile Device USB Driver.
    Now Windows recognises my iPod again.
    PS. I can’t remember if I had to restart the computer once the device driver was installed. But if the above doesn’t work for you, then at the end, try restarting to see if that finishes the installation of the device driver. Good luck
    ChrisKV

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

    my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

    Has the iPod been wetted?
    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer.
    Also see:
    https://discussions.apple.com/message/12690674#12690674
    https://discussions.apple.com/message/13032101#13032101
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • IPod Classic 80 GB Freezes when connecting to Computer

    Hi.
    My iPod Classic 80 GB Freezes when connecting to my computer (Vista... yes... I know). I've got my iPod for over a year now and I've never had real trouble with it.
    When I plug it in (iTunes already running) my computer gives me the 'thumbthumb' noise because an USB thingamajib is connected to the computer. At this moment my iPod freezes and stays on. iTunes doesn't seem to find my pod. When I disconnect my iPod, it'll stay on (doesn't go energy safe mode) and stays frozen until the battery is empty. But by then, I've already lost my playing info (Which I really value).
    Pllllllease help me out her.

    Someone has finally found a solution to this problem and i decided that i would spread the word around ... so here are the steps:
    1) Quit iTunes.
    2) Delete iTunes from your Applications folder.
    3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.
    4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".
    6) Go to <http://support.apple.com/downloads/iTunes8_21> and download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the diskimage and run the installer.
    You should now be able to run iTunes 8.2.1 again.
    And your iTunes will restore to before you upgraded and you won't lose anything.
    *If you download the iTunes file from the "support.apple" link, and you can't open it, go to http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/ and download "iTunes 8.2 for Windows: iTunesSetup.exe
    WhittWhitt

  • My iPhone 4s does not appear on devices when connected to iTunes in my Mac

    My iPhone 4s does not appear on devices when connected to iTunes in my Mac

    Check to make sure you have enough free space to include the videos.

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Maybe you are looking for

  • Designer with 8i release (8.1.6)

    I did a upgrade of my database from Oracle 8.1.5 to Oracle 8.1.6, I recover the information of Designer Repository successfully, but now when I try to do a change in a project in designer I found the next error: ORA-04031 Unable to allocate 472 bytes

  • From Clause query with form variables

    forms 9.0.4 rdbms 9.2 Is it possible to create a From Clause query with form variables generated from another block (but in the same form)? I am not having any success. I searched Metalink. It appears that according to DOC ID # 69884.1, in Forms 6i,

  • How to make Smart Builds repeat?

    im sorry if this question has been answered already, but how do you repeat smart builds, so that they never end, until you move to the next slide? (for example, using the 'thumb through' smart build the animation ends when the last picture is reached

  • CS6 Sprite Sheet animation alignment puzzle

    Hey all, I greatly enjoy using Flash CS6's Generate Sprite Sheet tool since it's much much quicker than exporting all the sprites and using TexturePacker (though I wager TP would provide far better optimization). One problem I seem to have is alignin

  • General: applet-specific SW and ISO7816

    Hi all! I'm newbie to Java Card, so apologies if question is stupid. 1) In ISO 7816-4 a number of smart card return codes/ instruction bytes, еtс. are defined. When I write an applet, should I use them or define my own? For example, the applet should