Ipod not showing up in itunes windows 8

after updating my iphone 3gs, which i now use an ipod, when i plug it up to my computer and open itunes, itunes does not recognize my device. help

Hi there puga805,
You may find the troubleshooting steps in the article below helpful.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W. 

Similar Messages

  • I have a 7th generation ipod nano that is not showing in the itunes window after being put on the USB. how do i fix this, i have a 7th generation ipod nano that is not showing in the itunes window after being put on the USB. how do i fix this

    I have a 7th generation ipod nano that is not showing in the itunes window? how do i change that?

    Thank you Bilbo! I was trying to find the instructions on how to do this, but was unable to locate them until you pointed me to it!
    After running the diag, it shows me error...
    [Device Opened]
    Error
    Menu to continue
    From the information Ive read on this occurance, my HD is shot? Is this true or likely? What would be recommended as the next step?

  • Ipod not showing up on itunes or my computer.it recharges when i connect it

    Ipod not showing up on itunes or my computer.it recharges when i connect it but it dosent show up under devices so i cant sync any music!!the screen on the ipod would usually say "connecting"or"do not disconnect"but it dosent say that anymore!!Ive been trying to fix it for DAYS but i cant find a good enough solution.PLZ HELP!!(p.s. i have a 4th generation nano)

    Hey there,
    A file or some files may have become corrupt somehow during connecting or disconnecting the unit. Try putting it into Disk Mode and see if that helps. To put it into Disk Mode, hold the Menu and Select buttons until the Apple logo appears. When it does, immediately press and hold the Center an Play/Pause buttons until you see a confirmation that your iPod has been put into Disk Mode.
    If you are able to do this, it may be a good idea to restore the iPod to its original settings. Keep in mind that by doing this you are erasing all the music and files from your iPod so make sure they are backed up on your computer somewhere. More on restoring your iPod can be found in the Apple document below.
    Hope this helps.
    http://support.apple.com/kb/HT1339
    B-rock

  • TS1363 1st generation iPod shuffle does not show up in iTunes (windows 7)?

    1st generation iPod shuffle does not show up in iTunes on my Windows 7 PC (but shows up in my computer).  Tried all the Apple trouble-shooting steps (some several times).  It used to work with Windows 7 on this PC.  Are there other steps I can try? 

    I'm not sure what "all" means, unless you state them, so if you have not done so already, you should use this procedure to reset the iPod shuffle
    http://support.apple.com/kb/HT1655
    Then, shut down your computer (power off) and start it up, with iPod shuffle NOT connected.  Run iTunes.  Then, try connecting the iPod shuffle again.
    Since this is a first gen iPod shuffle that IS recognized by the computer (so it's probably not a bad USB connector), you can also try using the iPod Reset Utility
    http://support.apple.com/kb/HT1238
    This is for the first and second gen iPod shuffle only, and does a lower level reset than using a normal Restore in iTunes.

  • Ipod shuffle not showing up in itunes windows 8

    New computer with Windows 8.  Downlaoded the latest version of Itunes and plugged Ipod shuffle tnto USB port.  Ipod is not showing up in Itunes as it did on the previous computer running Vista.

    Hi there puga805,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • IPod not showing up in iTunes (but it worked before)

    Hey... this is my second day of having my iPod and all was working fine. I had loaded songs into iTunes and was able to transfer them onto the iPod..
    The problem I am having now though is that I always leave my computer on at night, but I turn off my monitor. I went to sleep last night and when I turned on my monitor this morning, my computer had shown that it had been reset (it was prompting me to log in) so I did so, and now my iPod wont show up in iTunes anymore... but it does show up in windows explorer.
    Any fix to this? I've restarted my computer several times, uninstalled and reinstalled iTunes, and also stopped the iPod process in the device manager thingy and restarted it, but to no avail.

    I've posted several questions over this and no one has helped me either, i've done all the delete, uninstall, reinstall, computer management things too, and nothing has worked for me either, I am quite disappointed at how I am not getting any help. Hope you find someone who can help you!

  • Why isn't my Ipod not showing up on itunes

    Why is my Ipod not showing up on Itunes

    Type "ipod touch not recognized in itunes" into the search bar at the top of this page by "Support".

  • Ipod not showing up in Itunes on Mac computer

    When I plug in my ipod touch to my computer it does not show up in Itunes. do I need to reset my ipod touch?
    Help!!! I have done all the things to troubleshoot this situation other than reset my ipod. I am afraid to do this. I don't want to loose anyting.

    I would try:
    - Rebooting your computer
    - Resetting the iPod.  Nothing would be lost.
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Trying another USB port and cable
    - The troubleshooting here.  You di not say what you alread tried.
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - Last would be to place it in recovery mode and then restore it.  However, you will loose everthing on the iPod.  Restoring from backy and syncing will then restore you iPod to what it was before the last backup.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • IPod not showing up on iTunes 12

    It was all working fine before but today my iPod classic 120gb 2009 just not showing up on iTunes 12.1. There has been no software updated installed and the computer recognised my iPad perfectly. i have changed the usb port, the cable and restarted both my mac and iPod.
    when i plug the iPod in the iTunes actually starts and on the iPod screen it says "connected" but it just is not showing the device.

    Im using Yosemite Beta 10.10.2
    and yes I'm having the same problem
    can you beta bug report it with the feedback assistant?
    I think its not you.. its all of us..
    I think its a bug
    we need to let apple know

  • Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes

    Hello,
    I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged my iPod into my computer, but it only connected to My Computer and didn't connect to iTunes and update my iPod accordingly. So, the iPod is charging and the iPod is showing the "Connected, Eject before disconnecting" screen, but it isn't adding new music (which kind of defeats the purpose of buying new music). I thought it was because I was using 9, so I downloaded iTunes 10, but the issue still popped up.
    This hasn't pop up today after I installed 10, but back when I was using iTunes 9 the following error came up on my computer: "Windows Service Manager 32-bit Has Stopped Working." Now, no error messages pop up, even though the problem persists.
    I've tried suggestions in this post as well as in this post. Also, with the fix being recommended in those threads to change the code in Notepad by clicking "edit" under the System tab under My Computer? There's one problem - there is no edit button on my options. I've included a screen grab to prove this.
    I don't know if the relative age of the discussions makes any difference - maybe a new fix has com up and i'm just not finding it? Plus, since this issue began with iTunes 9, I can't help but feel like getting rid of iTunes 10 is going to help the issue, either.
    This is incredibly frustrating, not being able to add new music to my iPod, so if anyone can help me out, I would greatly appreciate it, as previously recommended ones aren't useful.
    Screen grab of iPod connecting to My Computer, but not iTunes:
    Screen grab of the lack of an "Edit" button in the place to edit codes as recommended in previous topics:

    One again shamelessly asking for help

  • IPod not showing up in iTunes, and...

    Windows Vista, Home Premium, 64-bit.
    Brand new 32GB iPod touch, 2G.
    I bring it home from the store, plug it in, everything works perfectly fine. By that, I mean it charges, shows up as a device in iTunes, and gets all my songs and videos on it. I also install iTunes 8.2, since it tells me I should.
    That was yesterday. Now, when I plug it in, it makes two beeping noises. The iPod itself doesn't react at all, the screen just stays black. The iPod doesn't charge, and it doesn't show up in iTunes.
    So, I call Apple for support, and I get it. Uninstall/reinstall, messing with the AMDS service, everything I could. The guy brought it down to either a problem with the cable, or the computer, but said it doesn't seem like it's a problem with Apple.
    After the fact, I try plugging it in again, while holding down the home button, and something new shows up. It says this:
    "Found New Hardware"
    "Windows needs to install driver software for your Apple Mobile Device (Recovery Mode)"
    and it gives me these options:
    "Locate and install driver software (recommended)"
    "Ask me again later"
    "Don't show this message again for this device"
    of course, I choose the first one and I click it. It then says:
    "Driver Software Installation"
    "Installing driver software"
    "Apple Mobile Device (Recovery Mode) Searching Windows Update..."
    "Apple Mobile Device (Recovery Mode) Pending..."
    After a few moments, something new pops up, while "Driver Software Installation" is still running, saying:
    "Found New Hardware - Apple Mobile Device (Recovery Mode)"
    "Insert the disc that came with your Apple Mobile Device (Recovery Mode)"
    "If you have the disc that came with your device, insert it now. Windows will automatically search the disc for driver software."
    and of course, iPod touches don't come with a disc. It gives me this option:
    "I don't have the disc. Show me other options."
    so I click that, and it gives me a this:
    "Windows couldn't find driver software for your device"
    it tells me I can:
    "Check for a solution"
    or
    "Browse my computer for driver software"
    I click "Check for a solution." Instantly, it says:
    "Windows was unable to install your Apple Mobile Device (Recovery Mode)"
    "Windows could not find driver software for your device."
    "If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
    there are no more options except for "close" at that point, and the Driver Software Installation says "Failed" as a status, so I just close it.
    Here's the other catch. I'm willing to try about anything to get it to work, so I think "might as well plus it into my laptop." So I do. Within moments it says:
    "New hardware detected: iPod"
    and then:
    "iPod USB drivers installed and ready to use"
    my iPod begins charging, and would apparently work fine on my old laptop, running XP.
    I have no idea what to do at this point. Any suggestions?

    Aaand, FIXED!
    Thanks to this: http://technicallyeasy.net/2009/03/restoring-a-previous-version-of-your-itunes-l ibrary/
    Everything working perfectly now. Thanks!

  • Ipod not showing up in Itunes

    When I plug in my ipod, it doesn't show up in itunes at all.
    but it charges fine, and it shows up in my computer.
    What do I do?

    I have this problem with several versions of iPods nano. They are mounted on the desktop but don't show up in iTunes. Interestingly, the iTunes window comes to the front, so it thinks something should be happening -- like showing the iPod in its sidebar list -- but it's not happening.
    I have found the following works:
    Quit iTunes
    Plug in the iPod
    When iTunes is launched with the insertion of the iPod, it seems to show up in the list but not when iTunes is already open.

  • Ipod not showing up on itunes or computer

    My ipod is not showing up on my itunes or one my computer. When I plug it in, it comes us as "do not disconnect" on the ipod, but nothing happens on itunes, or on my computer. How do I get it to come up?

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.

  • Ipod not showing up on itunes or computer when plugged in

    Trying to sync my ipod touch, but when I plug it in it doesn't show up on my itunes or on my laptop, a prompt just comes up saying something about the camera. I have windows 8. I need help, I don't know how to fix this problem by myself.
    I also have a problem, syncing new songs onto my ipod touch, it wouln't let me put my new cds on it, so if someone can help me fix these problems it would be greatly appreciated! Thanks!

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod not showing up in itunes or ipod updater

    my ipod worked fine...then i realized i had to install the ipod updater so i did that...then by accident i unplugged my ipod video while it said do not disconnect, now my ipod doesn't show up in itunes, but does in my computer...also my wireless usb adapter is my interenet connection and has stopped working...in my network connections, hi speed and wireless options do not even show up anymore...what could be the problem? also nothing is showing up in my device manager...what is wrong? plus when i open the ipod updater which is where i would do the restore...neither of the buttons are clickable...i think something is wrong witht he ipod updater software

    There are some bad sectors on the hard drive of the iPod, see if you can do a Restore on a window base PC, if so, reconnect it back with your Mac and hopefully it will get recognized for you to do the following :-
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes and click “Restore”

Maybe you are looking for

  • Address book: Find and replace characters?

    Hi all, I just imported VCF file from Outlook to Address book. I am in Iceland and the Icelandic characters came wrong. Is there any way to batch find and replace characters in Address book? That is in individual cards. Thanks, Hilmar

  • Designer syntax errors in correct code.

    I have added some trigger code to a bound item. The designer syntax checker finds errors in the code but the generated form runs correctly. It appears that the syntax checker doesn't like DECLARE. The code doesn't do anything and I believe it is fine

  • JDBC Receiver Stored Procedure

    I want to trigger a receiver stored procedure. According to SAP Help the following should be the structure. <StatementName5> <storedProcedureName action=u201D EXECUTEu201D>    <table>realStoredProcedureeName</table>    <EmployeeID [isInput=u201Dtrueu

  • Appleworks 5 claris to Appleworks 6

    I have a friend who had all her addresses in Appleworks 5/Claris. But that was on her old Mac. She's got a new iMac and transferred all her files. But now says that Appleworks 6 won't open her old Claris address data. Does anyone know where I can fin

  • Integrating Xcelsius into a website

    Hello! I am planing to have a website built which requires many types of charts to illustrate results. Does someone know if I can have the functionality of Xcelsius dashboards generating these interactive charts? Is there a special version of Xcelsiu