IPod not taking H.264 video

I have a divx converted video to H.264, that will not go on to my iPod, I have done this sucessfully before, b/c the other 50 or so videos work fine. I have actually re-encoded the video to make sure that I did put it into H.264. I'm using QT7 Pro on a 17in PB 1.67 1.5mb ram

I have actually re-encoded the video to make sure that I did put it into H.264. I'm using QT7 Pro on a 17in PB 1.67 1.5mb ram
Try re-encoding using the "Movie to MPEG4" export option using the H.264 ("base" MP4 option) using the "baseline" profile in the single pass mode with a video data rate of 400-600 kbps video tab setting, LC 128 kbps audio data rate at 44.1 khz sampling rate in Audio tab, and Streaming tab turned off.

Similar Messages

My webpage will not display h.264 videos. Why?

My website uses h.264 codec and the video is not being displayed in internet explorer 10. Is there a fix for this?

Hi,
Internet Explorer 10 does support h.264 with the HTML video element.
(http://ie.microsoft.com/testdrive/graphics/videoformatsupport/default.html)
Let's try to check H.264 video in IE compatibility view:
Fix site display problems with Compatibility View
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10
You can also change document mode as IE 9 to check the issue:
Fix common IE problems: Update your docmode for web standards
http://msdn.microsoft.com/en-us/hh779632.aspx
Hope these could be helpful and keep post.
Kate Li TechNet Community Support

SIR MY WEBCAM NOT TAKING PICTURE AND VIDEO ONLY SOUND,,I REINSTALL ITS DRIVER,,

SIR MY COMPAQ 610 ,,DOES NOT TAKE PICTURE OR VIDEO,,I REINSTALL ITS DRIVER,,ONLY RECEIVE SOUND,

Can you please update the latest webcam driver from the software and driver download page on www.hp.com and check if this resolves the issue? I would also suggest you to download the latest Cyberlink Youcam from the driver download page.
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Iphoto will not play H.264 video: error message "The operation couldn't be completed. (OSStatus error -101.)" Any suggestions to fix?

Hi, I am on iphoto 11 version 9.2, Mac OS 10.7.5 using a macbook Pro 2.8Ghz Intel. All of a sudden I cannot play video (H.264) on iphoto. I get the message "The operation couldn’t be completed. (OSStatus error -101.)". I rebuilt the iphoto database and videos played once, since then, they will not play and I continue to get the error message, even if I rebuild the database.
Any thoughts or helpful suggestions from anyone gratefully received.

Hi Terence,
Thank you for your help.
My saved iphoto library is in iphoto 09 and I have now iphoto 11 in my iMac as I upgraded from OS X Lion Mountain to OS X Mavericks.
Thanks
Charles

IPod not playing music or video

I updated to 4.1 and all of a sudden my iPod won't play music or videos. Also I can't hear any of the keyboard clicks when I type on it. Won't play through the AUX or the USB ports either.
Things I tried:
1. Reseting
2. Hard reset
3. Factory Restore
4. Downgrade to 4.0

Welcome to the club. My 2nd gen did the same thing when I "upgraded" to 4.2.1.....

IPod not receiving newly downloaded videos

I downladed v.7 and downloaded a movie but when I tried to put it on my ipod it gave me an error message "your ipod software is too old. Go to the Summary tab and click update" when I go to the summary tab it says that my ipod is up to date. I have the 30GB ipod. How do I get videos on to my ipod?
PC Windows XP Pro

To Apple Discussions!
This area is for G5 iMacs.
You need to post your question in one of the iPod Forums that pertain to the model you have.

IPod not taking update after iTunes update.

I just finished upgrading to iTunes 7 and it said my iPod needed an update (software version 1.2). It's in the process of updating but then it stopped and gave me an "unknown error 1417." I tried updating again and it gave me the same error. What does it mean?
Thanks.

some folks have been having some success getting past the 1417 using eboncairn's technique:
eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

MP4/H.264 Video to iPod

OK, let's start by saying that I have read the specs from Apple on what the iPod will take as far as video goes.
I have encoded numbers files with iMove and QT Pro to Apple standers and I still can not get the video on my iPod
My encoding settings for iMove;
Video; Movie to MPEG-4, Video Format = H.264, Image Size = 320 x 240 QVGA, Frame Rate = 15, Key Frame = Automatic, Restrict Profile = Main, Encoding Mode = Faster encode (Single-Pass)
Audio; Audio Format = AAC-LC (Music), Data Rate = 128 kbps, Channels = Stereo, Output Sample Rate = 44.100kHz, Encoding Quality = Best
Now come on that sounds like what apple.com posts on there site at http://www.apple.com/quicktime/tutorials/creatingvideo.html
I encode the video file, drag it to iTunes, Update my iPod and I get an error saying that they can not play on this iPod.
If I encode using Movie to ipod (320x240) it works just fine.
Can anyone help???
P.S. Why with QT Pro does Apple lock out the Options when encoding "Movie to iPod" I just want to lower the frame rate and sound bit rate as the movies I am encoding are from the 30's and 40's
P.S. To the Mac guys that post back to other questions thats for the TidBit on HandBrake I will be checking it out for my DVDs
Midnight Animation

If I am not mistaken, you are not the first to have encounter this problem from exporting video from iMovies to iTunes to iPod 5th Gen using that settings... apparently I read elsewhere people have more luck when exporting in the format of .mp4 rather tha the H.264... and I think that is the default setting in QT Pro's settings you talk about. I think some have better luck to re-export whatever iMovie they have using that QT Pro iPod Export Setting and that video would be able to play in iPods...
Ya I know, sounds silly that Apple make us go the long way round, maybe there is an update in iMovie for this in the near future?
Cheers

ITunes does not recognize 5th Generation video iPod in WinXp

PROBLEM: 5G iPod not recognized in iTunes (shows as removable hard drive in My Computer) via USB on HP Pavilion Notebook running WinXP. Latest error states insufficient power to run hi speed USB device on this computer. HP support replies that installed USB should comply to 480 Mbps hi speed standard. Trying to connect iPod via firewire results in "iPod can not be connected with firewire" error. Have tried the following steps before reaching this point:
Description of iPod: 5G, 30 gig video iPod model MA002LL contains 1.2 gig data (282 songs, 4 videos, 0 pictures)
Action: 5G iPod worked fine until connected to download purchased music 3 weeks ago.
Result: iPod screen shows "Do not disconnect" iTunes does not recognize iPod.
Action: Reset iPod (iPod works fine when not connected to any computer).
Result: same as above
Action: Recharged iPod overnight with wall outlet to confirm full charge.
Result: same as above
Action: Tried to run iPod Updater but iPod was not recognized by Updater (it does recognize iPod Mini and 4G)
Result: same as above
Action: Reinstalled latest version of iTunes.
Result: same as above
Action: Reinstalled COM interface for IPod Service several times.
Result: same as above
Action: Ran repair maintenance on iTunes (repair successful).
Result: same as above
Action: Uninstalled iTunes and iPod software, deleted their folders and bin files and cleaned out Temp directory, disabled virus protection and disconnected from network. Ran Windows Installer Cleanup Utility. (Uninstall successful)
Result: same as above
Action: Restarted and reinstalled iTunes and iPod Updater
Result: same as above
Action: Diasabled all non critical items in start menu
Result: same as above
Action: Uninstalled all three USB controllers
Result: same as above
Action: Reinstalled USBs
Result: same as above
Action: Tried to connect by firewire
Result: Error this device cannot be connected by IEEEE use USB cable.
Action: Talked to HP support to confirm USB standards on Pavilion Notebook.
Result: USB should read all 3 standard data speeds up to hi speed 480 MBps
Action: Tried 5G iPod on 2 other PC desktops with WinXP with powered USB 2.0 ports
Result: iPod shows "Do not disconnect" iTunes does not recognize iPod and both computers respond with the following error (which is not received on the notebook) "insufficient power to run hi speed USB device on this computer" both Desktops are older than the Notebook and have older versions of USB 2.0.
Action: Tried it on my iMac G4 thinking I could reformat it. Mac understandably does not read it as a drive. I tried the following three connections:
1) Firewire connection: iPod screen shows: firewire connection is not supported; 2) Powered USB port connection: drive is not recognized by Mac and iPod screen shows do not disconnect; 3) Unpowered USB port connection returns an error of "USB Low power notice" on Mac monitor and iPod screen shows menu but won't connect to Mac.
QUESTIONS:
Has the 5G iPod reached a point where it now pulls too much power to be read by USB? Is HP not giving me correct specs regarding the performance of the Notebook's USB? Why can I update my iPods with firewire on my Mac but not the PC? Any suggestions regarding what I should try next?
Thanks.
HP Pavilion dv notebook Windows XP

Solution was found: HP was encountering a conflict with a trial version of Symantec Security Center and Norton Anti-Virus causing an incomplete install of iTunes.
The following actions resolved the problem. Uninstalled both Symantec applications, uninstalled QuickTime 6*, installed QuickTime 7.1.3 (iTunes would not install successfully prior to this step, seems redundant but worked), installed iTunes 7.1 (with Quicktime 7.1.3 again), connected iPod 5G which was finally recognized, received error that iPod was currupted, restored iPod and is now working fine.
I hope that this helps someone else with similar video iPod problems.

Using iPod as hard drive.. video of girlfriend accepting proposal will not

Hi there,
We've got an iPod photo, which we've used now for a while to store photos and video files when our 1Gb Compact Flash card in the digital camera gets full.
We've just got back from a holiday, and I've copied all the files (mixture of photos and video files) to the PC, and they all work fine.
However on the day (her 40th Birthday) when I took some photos, then 2 videos where she opened her presents and found a marriage proposal inside.... on the iPod itself it shows the photos, plus the 2 video files as usual.... but when I go to transfer these to the PC, it only copies the photos, not showing these 2 video files at all... even when you go into the iPod's drive through 'my computer'... it doesnt show the 2 video files.
Does anybody have any idea why these might show on the ipod when you go into 'photos... photo import.... roll #5... browse' ...........but NOT when you look at it on the PC?
I could have lost all the photos from the 2 weeks and I wouldnt have minded... but i NEEDED to keep this video.... I have short term memory problems and I'll forget the look on her face and her tears and the 'yes' she blurted out if I dont have this video to watch
thanks in advance for any help you can offer
3G iPod photo Windows XP

Restoring an iPod will erase everything on it; prior to restoring the iPod, you can install MacDrive onto the PC and copy the files from the iPod onto the PC.
(18476)

My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

If the Reset didn't work, you'll need to do a Restore.
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad.

Ipod updater 2006-01-10: VIDEOS NOT playing correctly now...........

i updated to 1-10-06 ipod software & having problems. i have several vid i converted using videora. worked great till now. Now about 20 sec into my vid, my ipod will pause for about 5 seconds, like its thinking about wether it likes my video, then continues. i was not having this problem before i updated my ipod to 2006 software. videos still play fine in itunes. i have reformated ipod & reinstalled with no luck.
i tried to download the older software, 2005-11-17, wich is listed on apple downloads but when i open it, its the 2006 updater.
this is really annoying. did apple put some frickin bug in there for non purchased vid? how can i get old updater software bck on my ipod. help.

hiya!
"firmware update failure disk write error".
you don't explicitly say what you've already tried. so i'm going to have to start by asking this question ...
is that PC a Toshiba laptop?
iPod not recognized correctly on Toshiba laptop
love, b

Not able to add video podcast to ipod

i am having a couple of issues with my 5th gen ipod......first one is my computer is not recognizing my ipod and two i'm now not able to add videos from another computer that does recognize my ipod. can anyone give me some help.

No, the version has effect on syncing music
Have you succesfuly synced from this iTunes libary/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod

How to refer to video from iPod Notes???

How do I refer to an M4V video
from an iPod note???
5G Windows 2000

Sorry that this is not an answer to your question. I have just tried to do this as well and ended up here after searching the discussions.
I tried a number of things (<A HREF="movie=...">, "video=...", and many other combinations of ipod:music... ipod:videos..., etc.) and none worked. The link is there in the notes reader only for "song=..." (and variations), but it is not active. (But you probably knew all that already.)
Anyway, I post this mostly to keep the topic alive.
Cheers!
-- Michael

My ipod is not taking a charge. Can anyone help?

I have an older Ipod which is not taking a charge.

How are you trying to charge it? Have you tried a different cable to see if that makes a difference?
If nothing else, your iPod's battery may be shot and in need of a replacement.
B-rock

IPod not taking H.264 video

Similar Messages

Maybe you are looking for