Ipod not to be a detachable hard drive

now i know what my problem is...
how do i get my computer to not recognize my ipod as a detachable hard drive? i want it to recognize it as an ipod again.

now i know what my problem is...
What?
how do i get my computer to not recognize my ipod as a detachable hard drive?
Open iTunes prefs -> iiPod.
Deselect Enable disk use.
This has nothing to do with the iPod not being recognized though.
i want it to recognize it as an ipod again.
Is it showing up in iTunes or in Windows?

Similar Messages

IPod cannot be synced because external hard drive could not be read

I moved my music folder to an external hard drive to create space on my laptop, and changed the location under Preferences / Advanced. Since I did this, my iPod trys to automatically sync but gives the error message "The iPoD "[name]" cannot be synced. The disk could not be read from or written to." The external hard drive is on and working. Is there some reason that the iPod will not sync with this external hard drive? What do I need to do to fix it? Thanks, Bill

First question, since you made
the change, can you still play your music from within
iTunes?
Patrick
Sorry for the delay in answering as I have been traveling. Yes, I can play music from iTunes. The music is located on my external hard drive. iTunes software is on my laptop, and the music library points to the music folder on my external hard drive.
Thanks, Bill
Dell Laptop Windows XP

Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

thank you for the tip.
Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
Thanks again for the help.
jglaiche

IPod 4th Gen Click Wheel replaced hard drive; problems

Ok, So I replaced the 20gb hard drive with a new EXACT replacement hard drive, no other problems with iPod. But iTunes will not recognize it because the hard drive is not formatted. I tried formating it with Disk Utility but keep getting error messages. Im not sure what format to use. When the 4th gen came out Intel processors werent here so Im sure I need to simply format as Mac OS Extended. There is no HFS= format in Disk Utility. Im lost as to what to do. Please help??!

hmm - curiouser and curiouser
I've now managed to get it to manually update (after iTunes took 100% of system resources and I had to force quit it...) but that still doesn't really help me with the auto-sync feature which still won't work
aaaaaaggggggghhhhh

My computer was totally destroyed & I do not have backup or external hard drive with my iTunes library. Will I be able to access my iTunes library when I purchase a new computer? It was the only computer authorized to play library.

My computer was totally destroyed & I do not have backup or external hard drive with my saved iTunes library from it. That was the only computer authorized to play library. I do not have an iPod or iPhone with any of that library (which has over $2K in music purchases & over 5K in songs I ripped). Will I be able to access my iTunes library when I purchase a new computer?

You should be able to access your past iTunes purchases. You'll need to re-rip your CDs See: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
See also this backup tip so you don't get caught out again.
tt2

Can ipod be used as an external hard drive?

Can the 80 GB ipod be used as an external hard drive if a certain section is partitioned? I bought the ipod with the most space for this purpose, for my music and a portable HD.
What is the RPM on ipod HD?
What is the best way of using the ipod as an external HD but at the same time making it compatible with itune for transferring music?
Thanks.
Dorian

It is not recommended that you partition the iPod hard drive.
You may render it useless as a music player if you do.
http://docs.info.apple.com/article.html?artnum=60957

How can I restore my iPod touch data to a new hard drive when the old one crashed

My computer crashed and I want to put the contents of my iPod Touch back on the new hard drive. How do I do this without accidentally Syncing and copying over my data? The vast majorioty of the music on my iPod is my own from DCs I own.

You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabilng the prevent iPods,iPhones, and iPads from automatically syncing option.
Next, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials.
If possible, either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync. To do this, right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
http://support.apple.com/kb/ht1766
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this older post from another forum member Zevoneer covering different software availbable to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
http://support.apple.com/kb/ht1414
B-rock

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Windows 7 and iTunes doens't recognise iPod Classic 80g after wipe clean hard drive and format fat32.

My iPod Classic 80gb every now-and-then goes funny, and eventually iTunes doesn't recognise it. In the past I could put it on disk mode, and do a reset, but some times I would have to format (FAT32), uninstall and reinstall iTunes, so it would work. Now it happened again, this time wiped clean the hard drive and formatted. However windows 7 and iTunes still doesn't recognise it. Tried many tips online but nothing works. All software I have used don't see the hard drive, so can't format it again.
I can get it on disk mode but even then windows and iTunes don't recognise it. When connecting to laptop my machine goes boiling hot. Left it connected with iTunes on for few hours but still no luck.
Any suggestions?

Hello @turingtest2.
Following your threat I realized it was time to have my hard drive changed. My iPod classic has a Samsung Model: HS081HA, 80gb/3600 rpm (real hard to get it open and check out!!!).
My question is if I DO HAVE to buy exactly the same hard drive, or I could get away with another manufacturer and model, such as Toshiba (80 GB MK8009GAH FOR iPod Video 5th 5.5th iPod Classic 6.5th 7th Gen Hard Drive - Ebay listing)?
I ask you that as these Toshiba hard drives are considerably cheaper.
Help much appreciated.

Your firmware can not be updated because the hard drive...SMC 1.3

Hi all !
I have a problem. I'm have a macbook pro Santa Rosa =
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f1
This morning I saw the update for the SMC firmware (1.3).
Before restarting, I have this error :
http://img411.imageshack.us/img411/6606/26048579.jpg
Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partiton or RAID scheme.
When I went into Disk Utility in order to check, here is what I have =
Name : FUJITSU MHY2200BH Media
Type : Disk
Partition Map Scheme : GUID Partition Table
Disk Identifier : disk0
Media Name : FUJITSU MHY2200BH Media
Media Type : Generic
Connection Bus : Serial ATA 2
Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 186.3 GB (200,049,647,616 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 0
I thought Boot Camp could be involved becauseI know it's the only thing related to the EFI.
I searched on internet, and Ifound nothing. There was a solution in order to reset the partition table, but the tool is no longer available. The link on on the application explains that I have to reformat my macbook pro. I find a bit weird to make this , I can't spend hours for backup / restore just because the SMC update does not work. have you any lead for me ?
Thanks ,
Razique

Have you tried this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

I recently had to replace my hard drive and lost my iTunes library. When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

Recover media from iPod
See this post for options on moving your iPod data back to your computer.
tt2

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine.

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine. What do I do?

Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.

Why will my projects not move to an external hard drive within iMovie?

My movie list has grown so big I need to move them into an external hard drive. I searched on apple.com and found out the way this is best done. Firstly it states that it is done within iMovie, which is what I did. Secondly it states that you select a toggle button to display the various hard drives which are attached and again I did this and can see the hard drive I want to move the projects and events into. I then selected the projects and dragged then over the relevant hard drive, I can not seem to drag the event. However when I release the project to drop it into the hard drive it won't fall. It just returns back to it's starting position in the Project Library. I have tried to do this both with holding down the cmd button to move them or without the cmd button to copy them.
For some reason my files, either events or projects, won't move into the displayed hard drive. I am not sure if there is a bug in my iMovie8 or my hard drive is some how not configured properly. The hard drive was bought especially for a mac and runs Mac OS Extended (Journaled).
Can anyone suggest what is happening and how to get around this? In worst case is there a way to move the files outside of imovie that will still allow them to be properly displayed within imovie?

Hi
Can anyone suggest what is happening and how to get around this? In worst case is there a way to move the files outside of imovie that will still allow them to be properly displayed within imovie?
I don't think that it can be done that way - BUT I KNOW that it can be very destructive
most probably end up as un-reparable.
The move of projects and events - works so much better in iMovie'09
Yours Bengt W

I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say install to Applications but it's not there. How do I find it and can I put it in my dock?

I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?

In Safari's preferences:
Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder.

Ipod not to be a detachable hard drive

Similar Messages

Maybe you are looking for