Ipod Not working (burned by ipod usb cable)

I connected my 20gb ipod to my pc with the ipod usb cable to transfer songs to my ipod, after about a minute or so by ipod got hot so i disconnected it and now my ipod wont turn on and it smells burned. What should i do, and will my warranty cover it?
I would appreciate any help thank you!

I think that the only way you'll find out if the warranty covers it is if you send it for service and let Apple look at it.
http://depot.info.apple.com/ipod/
Could be a battery problem (overheating).

Similar Messages

4th Gen iPod not working with older ipod speaker docks

Has anyone else had issues when docking a 4th gen ipod to portible speakers or an adapter that works fine with 3rd gen ipods? I've had 2 different things happen... with an alarm clock w/ ipod jack, the ipod will play, but it won't charge. With a travel speaker set for ipod that I use, the ipod won't play or charge. The same thing happens in my car which has a jack for an ipod.. my 3rd gen will play and charge, but my 4th gen will only play.
Any help out there to resolve this?

This might help with the charging problem:
http://www.scosche.com/products/productID/1667

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

IPod not working with my computer

I hadn't upadated my iPod in around a month when i noticed that some of the songs wouldn't play at all, some would play for a little while then skip to the next one, and then the ones that would play took a while to start up. I tried to update my iPod but iTunes didn't recgonize my iPod. My desktop would show that there was a "Mass Storage Device" but it would not stop the device so that i could safely remove it. After fiddling around with my computer nothing was happening, so I unsafely removed it by just plain out pulling the USB plug. Then it showed to apple symbol and then the folder with the exclamtion mark. Then i reset my iPod and over the course of trying to fix it i reset it about 5 more times. I reinstalled iTunes and iPod updater. I restarted my computer. I put my iPod in disk mode and then plugged it in. My computer showed that there was a "Mass Storage Device" but iTunes didn't recgonize the iPod and when i clicked on My Computer but it didn't show up. Then when i turned my iPod off and on again it turned on like it normally does with the same problems i said above. I then tried to restore my iPod by using the iPod updater. I plugged my iPod in and then I opened the updater. It says initializing and then just sits there untill it doesn't respond. My iPod just says "Do not Disconnect". Any help could be appreciated. Thank you
Windows XP Home Edition 2002: Dell DIMENSION 8400 Intel(R) Pentium(R) 4 CPU Windows XP 3.19 GHz, 512 MB of RAM

I got the same error, still cant fix it. Try this?
Here you go, the definitive guide to fixing these chugged-up iPods. I had the exact same problems described below, and it took a variety of methods to fix.
Attempt the following methods at your own risk! You will loose all your stored music and settings on your iPod. Apple's Support articles are still the best way to safely restore a non-functioning iPod. Remember, the best way to repair a damaged or non-functioning iPod is through your authorized Apple retailer or through Apple's Mail-in support services.
Step .5 - Plug iPod into wall adapter and let sit overnight (charges and attempts to start all night)
Step 1 - Completly uninstall iTunes and iPod updater, restart your computer.
Step 2 - Reinstall iTunes and iPod updater (in that order). Restart your computer.
Step 3 - Holding iPod perpendicular to the ground, with the bottom of the iPod closest, drop the iPod from approx. 4 inches onto a soft carpeted surface. (you can start by dropping it onto your bed or pillow first)
Step 4 - Start iPod (press menu button). If iPod fails to start, repeat step 3 and 4 with increasing heights (2 inch increments)
Step 5 - Once iPod has started into the menu screen, verify that there is no (or little) disk damage by playing a song or two.
Step 6 - Place iPod onto a flat surface face up. Put the iPod into Disk mode using the following procedure:
i. Turn hold on, then off
ii. Press and hold Menu and Select buttons simultaneously for approx 6 - 10 seconds. Release when display 'flickers' and goes blank
iii. When the Apple image displays on the screen, immedeatly press and hold the Play/Pause and Select buttons. Continue holding until the iPod enters Disk Mode, signified by an "OK to Disconnect" prompt and a check-mark.
If you are attempting to connect your iPod to a Toshiba laptop/Tablet PC, then complete the steps outlined in Apple Support Article 300836 - http://docs.info.apple.com/article.html?artnum=300836
Step 7 - Plug in your iPod using the supplied FireWire or USB cables. Allow Windows to recognize the iPod and allow iTunes to open. This may take up to 2-4 minutes. A rotating arrow will appear in the iPod screen at the upper left-hand corner. This signifies your computer is communicating properly with the iPod.
Step 8 - When iTunes window appears, it may prompt you if you want to associate your iPod with the library. Cancel all prompts and close iTunes.
Step 9 - Open the iPod updater, and click restore.
Step 10 - When the restore is complete, the iPod will display an image of the adapter plugging into the wall. Disconnect your iPod from your computer and plug it in with the included power-supply and FireWire cord.
Step 11 - The iPod will boot up normally, showing a progress bar at the bottom. The language select screen will soon show up afterwards.
If you are attempting to connect to a Toshiba computer, complete the steps "Re-enable high-speed interfaces" in Apple Support article 300836 - http://docs.info.apple.com/article.html?artnum=300836
Step 12. Plug in your iPod normally. Allow iTunes to boot up. (This could take another 2-4 minutes) A prompt will appear asking you what you would like to name your iPod. Follow the onscreen instructions.
Congradulations! You have successfully fixed your iPod. Once again, attempt these methods at your own risk. I am not responsible for any damages or loss of data incurred by the following steps. An Apple Retailer is still the perferred way to repair your iPod.
Source: http://discussions.apple.com/thread.jspa?threadID=249220&tstart=0

Why exchange email will not work on my ipod touch, but ok on iphone

Why will microsoft exchange email not work on my ipod touch, but with the exact same settings, it works fine on my iphone? What is the reason for this?

Try a soft reset, press and hold both power and home buttons together until the Apple logo appears, about 15 seconds, then release both. If still no joy, go into Settings>General>Reset then tap Reset All Settings. If still no joy, back up your iPod to your computer then do a Restore to Backup, if that doesn't work Restore to new through iTunes. If a full restore to new does not work, you may have a hardware issue, contact Apple Genius Bar to have your iPod evaluated. Good luck, Cheers.

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Is the imessage server down? because is not working in my ipod and my friend's one

because is not working in my ipod and my friend's one, then i logoff but now it doesnt let me log in :/

Hi check here
http://www.apple.com/support/systemstatus/
As you can see imessage is down right now, so all you can do is wait for apple to fix whatever is wrong

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

My mail is not working from my ipod i looked it up it says it trouble shooting but its not giving me anything to fix it can someone help me?

My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?

Can you access the account from another device?
Without you telling use the email provider and type of account we can't really help you.

TS1538 Running Windows XP,Ipod Mini works fine,but Ipod Nano visible in Windows,but not Itunes.Have loaded latest version of ITunes.How do I prceed

Am running Windows XP pro,Ipod Mini works fine,but Ipod Nano is visible in my computer as a mass storage device,but not in Itunes.The settings on the Ipod says Version 1.0.2 Mac.Have tried all the trouble shooting solutions under Itunes help,but no success.Is it a problem with the Ipod or my Windows computer?Please help.Thanks Marcus.

http://support.apple.com/kb/TS1363

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

My touchscreen is not working on my ipod 3rd generation.. any tips from any one....

my touchscreen is not working on my ipod 3rd generation.. any tips from any one....

To rule out a software problem
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you have a hardware problem.

Smart playlists not working on my ipod touch?

my smart playlists (such as top 25 most played, recently added etc) are not working on my ipod touch 3rd gen 64gb. they are syncing the correct info on my other ipod nano, but on my ipod touch they are coming up with different songs. this is very annoying!!! please someone help me?
does anyone else have this problem?

same... please help!

Why apple password did not work with my Ipod Touch

why my apple password did not work with my Ipod Touch?

Just where are you entering it?
What happens when you try?

HT1212 Reset does not work on disabled Ipod touch. I did the never synced device option on a computer that we have never synced with. Still says try again in 22,462,172 minutes. Itunes says it cannot sync also. Any ideas???

Reset does not work on disabled Ipod touch. I performed the reset procedure Apple recommended and it did not work(Never synced device with itunes). Comes back to try again in 22,462,160 minutes. I tunes says Ipod is locked and can not access. Any ideas???
Thank you

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Ipod Not working (burned by ipod usb cable)

Similar Messages

Maybe you are looking for