Ipod ok on mac but not on PC after the famous update

As I read in many topics, after the new update Ih ad my 60gb frozen for a long wierd time... it seems to be ok now by your help.
Now, when I connect it to my PC, do not deconnect appear and wooof it disappear and let the ipod charge and show it to the desk as a drive with nothing in it.
When I plug it to my prtable mac... it 's all fine.
I downloaded the last update version for i pod and itune.
Is there anything I miss knowing that five days ago everything was fine.
Thank you for your support.

In addition to Neds suggestions, empty the Safari cache (which should be empty after a clean install).
Goto the Safari Get Info screen (in Finder or in Dock if you have Safari there), click the triangle on languages, and disable those you don't use.
My Safari response time was significantly slowed after the 10.4.5 update, and using the combo updater took care of that. The 10.4.6 combo update is located here.

Similar Messages

Can I recover music that was stored on my Mac but not in iCloud -- after the Mac is not repairable?

My I-Tunes purchases (years ago) were never stored in the iCloud. My Mac with the ITunes purchases crashed and is not repairable. Can I recover those I-Tunes purchases through the I-Tunes store? Would the store have the record of my purchases and let me access them to my new authorized device?

If the instructions in this article aren't applicable, click here and ask.
(119055)

IPod Touch (4th gen) will not sync music after the latest iTunes update

I'm using iTunes on a PC with Windows 7 and after the latest update (iTunes 11.2.2), it will not sync with my iPod touch 4 (also updated to the latest possible version - iOS 6.1.6).
Before the update there was no problem with the sync. And this iPod has always been synced only with this computer, and this iTunes library.
After the iTunes update, several songs on my iPod were greyed out and unplayable (the library plays fine in iTunes).
Now, when I try to sync, iTunes goes through all the steps, saying it finished syncing, without any error message but there is no actual change on the iPod.
I've tried deleting all the music on the iPod, to resync the entire music library anew.
Again, iTunes went through all the steps, finished "syncing" and nothing - and, of course, all the music on my iPod is now missing.
When I check the "On this iPod" option in iTunes, the entire song list shows up there but appears greyed out and unplayable.
On the actual iPod device, there is absolutely nothing in the Music app - no songs, no playlists.
The iPod always shows "no data" in the Music app.
Sometimes iTunes shows that I have 18GB of music on the device, sometimes it shows 0GB ...at one point it showed "no space available". But it has plenty of space - 23.5 GB of available space out of 32GB.
To fix this I've tried the following:
- automatic sync, manual sync, manually adding/deleting songs on the iPod, autofilling and replacing songs;
- resetting my iPod by holding the (on/off and home buttons) and resetting through the "reset all settings" option on my iPod;
- reset and restore from backup;
- uninstalled and re-installed iTunes on my PC.
- I've run the diagnostics tool in iTunes - all tests passed;
...plus various other suggested solutions I have found in the similar topics around here.
(I've checked and there are no restrictions to the songs, the computer is authorized, etc.)
Absolutely nothing works and it is very frustrating, as I usually only use the iPod for the music.
Please help.
Violet

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

Pages does not open anymore after the latest update

I did all suggested problem solving steps, but after the last update Pages does not open anymore.
It opens a window and immediately crashes again.
I paid for it, and I used it for my business - and I'm so angry, that there is no support for apps in fact...

Welcome to the Apple Community.
Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

[SOLVED] Amarok not starting up after the latest update

Hi there,
as the title says, my Amarok isn't starting anymore since I did the latest update (from today to 2.4.1-3).
I see my bouncing logo animation on the cursor for a few seconds and after that it just disappears and nothing happens.
Did this happen to anyone else? Any hints what I can do now to fix this?
Thanks in advance!
Last edited by derblub (2011-06-28 22:13:52)

Ok, sorry for that - just thought someone else run into that too - now some details:
[blub ~ ]$ amarok
KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
amarok: symbol lookup error: /usr/lib/xine/plugins/1.29/xineplug_inp_cdda.so: undefined symbol: xine_get_homedir
unnamed app(4575): Communication problem with "amarok" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name org.kde.amarok was not provided by any .service files" "
[blub ~ ]$ sudo amarok
unnamed app(4881): KUniqueApplication: Cannot find the D-Bus session server: "/usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
Autolaunch error: X11 initialization failed.
unnamed app(4880): KUniqueApplication: Pipe closed unexpectedly.
[blub ~ ]$ kdesu amarok
kdesu(4586) startApp: Daemon not safe (not sgid), not using it.
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 293 ] Running "/bin/su"
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "Password: "
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 293 ] Running "/bin/su"
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "Password: "
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::WaitSlave: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 379 ] Child pid 4593
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line ""
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "kdesu_stub"
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 293 ] Running "/bin/su"
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "Password: "
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::WaitSlave: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 379 ] Child pid 4597
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line ""
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "kdesu_stub"
in my .xsession-errors I'm seeing just this - not sure if it's really related
[/usr/bin/nepomukservicestub] '' is not a UTF8 or latin1 string
'' is not a UTF8 or latin1 string
'' is not a UTF8 or latin1 string
[/usr/bin/nepomukservicestub] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/nepomukservicestub] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 9
[/usr/bin/nepomukservicestub] Soprano::ODBC::Connection::Connection() Soprano::Server::ServerConnection(0xa692a0)
and
yakuake(1539)/kdeui (KWindowInfo) KWindowInfo::desktop: Pass NET::WMDesktop to KWindowInfo

My iPad mini will not turn on, after the newest update.

Just received an iPad mini from my mother the iPad was up and running. I put the new update on it Friday night and Saturday evening plugging it in but it still had battery. Went back to look at it and it was black screened plugged in. I unplugged try to turn it on and it won't start up. I tried to reset with holding the off and home button. Didn't work. I tried to reboot with the computer and it does even recognize it. Please help!

Hold the home and power button downs until it restarts. If iTunes doesn't recognize it, get it replaced. http://www.apple.com/retail/geniusbar/

Help! I have and iPod classic 120GB but with the latest iTunes downloaded to my computer, I can't download to my iPod. I had possible not kept up with the latest updates (?) so I downloaded what seems to be the latest iTunes but I still can't dnload tunes

Can't download my new iTunes songs. Maybe I had not done iTunes updates for a few months (?) so I downloaded what seems to be the latest iTunes to my computer and it still doesn't download my new songs. Am not to computer savy so I would appreciate any help. Thank you very much.

Do you, perhaps, mean "sync" instead of "download?" Please describe the problem you are having in more detail so we can better help you. Include the exact text of any error messages you are getting.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I can connect to MAC but not my PC

I have a new Nano, that connects to Mac but not my PC. When I try to connect to PC it says "iTunes as detected a Macintosh formatted iPod. You must restore this iPod before you can use it on Windows."
How can I get my Nano to work on both?
Thanks!

Windows cannot read a Mac formatted disk.
You need to Restore on iTunes for Windows and it will then work on Mac & Windows.

Bug/Solution: iPod seen by Windows but not by iTunes

(apologies if this has already been reported)
So I had the problem where iPod would show up in Windows as a drive letter, but iTunes wouldn't see it at all. I had followed all the instructions in this article to no avail:
http://docs.info.apple.com/article.html?artnum=93716
And then I tried something which ended up working. This may be somewhat of an edge case scenario, but it's possible others may hit it:
My OS is installed on the D: drive, instead of normally on C:. Also, there was nothing assigned to C:. So when the iPod was plugged in, Windows gave it C:. As I said, iTunes would not recognize the device at all.
On a whim, I reassigned some other USB device to C: so that the iPod would be forced to a different drive letter (I think it was G). Lo and behold, iTunes recognized the iPod just fine.
I didn't do any other testing on it, but it seems if iPod's drive letter < OS letter, iTunes won't see it(?)
Anyway, hope this helps someone else.<br>
30gb Windows XP

Thanks a lot, I must have spent close to 15 hours trying to figure out why my ipod didn't work with my re-installed windows. It turned out my windows was on drive H:, and the ipod was being mounted to drive C:. I switched the ipod to drive I:, and it finally worked! The following instructions may help if your computer sees your ipod in windows explorer (My computer) but not in iTunes, and the ipod is mounted on a drive letter lower than the operating system.
To switch your Ipod to a different drive letter:
1. Connect your ipod to the desired usb 2.0 port.
2. Go to the start menu and click "Control Panel".
3. If you are in "Category view" (check the upper left where it says "Switch to classic view") switch to classic view.
4. Double-Click "administrative tools".
5. Double-Click "computer management".
6. Under "storage" on the left, click "Disk Management", and wait for it to connect to the logical disk managament service.
7. Your Ipod should show up in "volume" column; RIGHT click on it and select "Change Drive Letter and Paths..." from the pop-up menu.
8. Click on the "Change..." button.
9. Select a different drive letter from the pull down menu. (Pick a drive letter higher than the one your operating system .ie Windows XP.. is installed on. For example if Windows is on drive D:, then pick a drive letter E: or higher.)
10. Click "Ok"
11. Click "Yes"
12. Restart the computer, and see if your Ipod will connect to iTunes!
Dell Dimension 8200 Windows XP Pro

IPOD detected by Windows but NOT iTunes – possible solution

I have a new 30GB Video IPOD with an AMD PC running Windows XP SP2 and like many others posting on this site, my iTunes stopped recognizing my IPOD. ITunes did work correctly immediately after my initial software installation and I was able to sync some music, but it failed thereafter and I was unable to add any more files. Like many other users, I tried all suggested fixes including the 5R’s, uninstalling and re-installing the software, changing selective start-up items using “MSCONFIG”, etc. Nothing worked – until I tried the following…
1) Uninstall iTunes & IPOD updater software using Windows Add/Remove Software tool in the Start/Settings menu
2) Reboot Windows
3) Connect IPOD to USB port (Windows should detect the IPOD)
4) Run the original IPOD CD installation disk, load the IPOD Updater software (but not iTunes …yet)
5) The IPOD Updater software loads first, so when prompted to load iTunes, wait (you may minimize the window), go into the IPOD Updater software (Start/Programs menu) and open the IPOD Updater window by clicking on the icon. If your system works like mine, the IPOD should now be recognized and the “RESTORE” button should now be available. Don’t click the “RESTORE” button – just leave this window open (minimize the window if you wish) and go back to the iTunes install window.
6) Continue with the installation of the iTunes software.
7) Once installed try opening the iTunes program to see if IPOD is detected (at this point it still didn’t work for me)
8) With the IPOD still connected, and the IPOD updater window still open, go to Add/Remove Software (Start/Settings) and click on “remove” iTunes – you’ll be prompted to “Repair” or “Remove”. Choose REPAIR. Once this process is complete, try opening iTunes again – at this point my computer now recognized the IPOD

i could do everything fine up until step 6), the installation of itunes. when i tried to, with the ipod updater window still open, it said it could not continue without closing the updater program. any suggestions?

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Download the Brother Mountain Lion drivers here.

TS1363 "iPod: Appears in Windows but not in iTunes" Isn't working!

I've tried all of the things in the "iPod: Appears in Windows but not in iTunes" but none of them work.
I'm on Windows 8 and those are the instrucations I've followed.
The only thing I haven't done is reset my computer to factory mode but that Isn't an option for me cause I got saved games that can't be backed up.
I've literaly tried everything in that help page and it doesn't work.
All I get is the iTouch charging, asking me to trust the computer, I say trust, nothing happens, I check the device manager and it doesn't shw the USB no matter what, I restart the ipod services and the apple software services, nothing happens, I completely take dwn my McAfee firewall and scanning system, it doesn't work, restarting it to make sure no viruses attack, uninstalled Razer Synapsis because it has been a pain in the butt before, that doesn't work, I emptied my Temp file and that didn't work, And in the end the iTouch is charging but not even being see by Itunes and no updates, restarts, reinstallations, uninstallations, checking, researching, and anything else I can do works.
Can someone please explain why apple tech is such a pain when it comes to Windows 8 and how I can fix this without losing 2 years worth of school and saved games?!?!?!?

Try a full teardown as in Troubleshooting issues with iTunes for Windows updates?
A recent poster to forum is suggesting uninstalling WMP from Windows?
Connect the device to a different compuer and back it up there. You should be able to copy off the library to a portable hard drive. See also Recover your iTunes library from your iPod or iOS device.
tt2

I-pod touch works on a Mac but not a PC

Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

HT201250 If time machine puts all of my photos onto my external hard drive using time machine, can I then delete the photos from my computer put view them again from the external hard drive? Basically, can I free up space on my mac but not lose years of p

If time machine puts all of my photos onto my external hard drive using time machine, can I then delete the photos from my computer but view them again from the external hard drive? Basically, can I free up space on my mac but not lose years of photos?

To add to Niel's comment bear in mind that if you have a backup copy on an external HD and later delete the orignals on your Mac HD you will then only have one copy - so no backup.
If the pictures are precious you should have at least two copies, and ideally another copy kept off site,

Ipod ok on mac but not on PC after the famous update

Similar Messages

Maybe you are looking for