IPod on iPhone 4 starts playing when switching between apps

My iPhone 4's iPod starts playing when I switch between apps, it goes on and off

Not sure if this is the deal or not, when I click on my ipod app it's playing a song, I can't here any music but the pause button is showing, is it playing and running down the battery.. BTW I never seem to have earphones around to see if it's playing, however I have sync in my car and it is playing when I switch to aux..
Thanks for any help and I hope I'm not stepping on your positing. sorry if I am..

Similar Messages

  • Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

    Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • CC aplications go to white screen and lock up the computer when switching between apps

    We have been successfully using CC for several months, then about 30 days ago suddenly when we tried to switch apps between dreamweaver, and Photoshop the computer went to a White screen and froze.  This problem is completely repeatable, and we are at a complete loss to correct the problem.  Any ideas? It doesnt do this when you switch withing Bridge and Photoshop, but with anythign else,,,,,,,,,,,,,,, CRASH!!

    I am unable to get into the chat.  I tried explorer and chrome and neither will allow us to access the chat.  It continues to go around and around.
    De: John T Smith 
    Enviado el: Thursday, November 20, 2014 8:41 PM
    Para: Beatriz Neto
    Asunto:  CC aplications go to white screen and lock up the computer when switching between apps
    CC aplications go to white screen and lock up the computer when switching between apps
    created by John T Smith <https://forums.adobe.com/people/JohnTSmith>  in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6949285#6949285>

  • How do I stop Firefox mobile from having to restart when switching between apps?

    When I'm switching between apps, firefox takes 10 seconds to load up again. Why isn't it already loaded since I just had it up? The Opera browser doesn't do that.

    Android automatically closes apps in the background when it needs more memory. To let Firefox run in the background longer, we will need to reduce its memory usage. We are continuing to work on this with each new version of Firefox.

  • Audio Menu MOtion continue play when switching between menus?

    How can encore continue playin the same background music when the user is switching between main menu and submenus? and not having to restart the song when you choose a submenu.

    There is plenty about Encore to be frustrated about, but you should spend a bit of time investigating Scenarist or DVD Lab Pro (authoring programs that provide scripting).  They are also missing some "features" (that are related to limitations of the DVD spec).  And their price tags indicate why Adobe licensed the sonic authorcore only, and not "Scenarist" itself for the Adobe authoring component.

  • Tabs refreshing by themselves when switching between apps

    Sometimes when I switch between Firefox another app, when I come back to Firefox all my tabs refresh even though I did not close Firefox. How to prevent?

    hello jlamoure, i think this might be due to the memory management of your operating system. resources might be moved away from the applications running in the background when they are needed elsewhere, so that may be why firefox is reloading the tabs once you come back...

  • My computer tells me I purchased the Rod Stewart Christmas album, but I did not. How can I get iTunes to cancel this "purchase". Also this thing has just started playing when I turn on my computer, how do I stop it?

    My computer tells me I purchased Rod Stewart's Christmas album. I DID NOT. How do I get iTunes to cancel the purchase. Also, this thing has suddenly started playing when I turn on my computer. How do I make it stop?

    It is probably too late to cancel it, but contact the iTunes store support staff at http://www.apple.com/emea/support/itunes/contact.html and see what they can do for you.

  • This isn't achely a question it's about iPod  not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

    This isn't achely a question it's about iPod  not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

    And it's totally impractical for any OS to provide complete backwards compatibility in perpetuity. So no, Apple cannot grant your request. As WJ said, it's the developers' reponsibility to provide updates to their applications to be compatible with newer operating system releases, whatever the platform might be.
    Regards.

  • Dreamweaver 6.1 - JavaScript error when switching between open tabs

    When switching between open tabs a sequence of javascript
    errors occurs. I had not used Dreamweaver for about 2 weeks, and
    last time I used it with no problems.
    I have tried uninstalling it, OKing removal of all files when
    asked, re-installing it and updating with dwmx61_updater.exe, but I
    still get the same errors.
    This has rendered the software virtually unuseable, so any
    help would be greatly appreciated, as I'm working to a
    rapidly-approaching deadline.
    "While executing Browse_Back enabled in toolbars.xml, a
    JavaScript error occurred"
    followed by
    "While executing Browse_Forward enabled in toolbars.xml, a
    JavaScript error occurred"
    followed by
    "While executing Browse_Stop enabled in toolbars.xml, a
    JavaScript error occurred"
    The relevant code seems to be :
    <!-- Browser nav toolbar -->
    <toolbar id="Browser_Toolbar" platform="win"
    label="Browser Navigation" container="document"
    initiallyVisible="false">
    <button id="Browse_Back"
    image="Toolbars/images/MM/back.gif"
    disabledImage="Toolbars/images/MM/back_dis.gif"
    tooltip="Back"
    label="Back"
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
    command="dw.getDocumentDOM().browser.backPage()"
    update="onEveryIdle"/>
    <button id="Browse_Forward"
    image="Toolbars/images/MM/forward.gif"
    disabledImage="Toolbars/images/MM/forward_dis.gif"
    tooltip="Forward"
    label="Forward"
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
    command="dw.getDocumentDOM().browser.forwardPage()"
    update="onEveryIdle"/>
    <button id="Browse_Stop"
    image="Toolbars/images/MM/stop.gif"
    disabledImage="Toolbars/images/MM/stop_dis.gif"
    tooltip="Stop"
    label="Stop"
    enabled="dw.getDocumentDOM().browser.getPageBusy()"
    command="dw.getDocumentDOM().browser.stopPage()"
    update="onBrowserPageBusyChange"/>
    <button id="Browse_Refresh"
    image="Toolbars/images/MM/browserRefresh.gif"
    tooltip="Refresh"
    label="Refresh"
    enabled="true"
    command="dw.getDocumentDOM().browser.refreshPage()"/>
    presumably the next error is caused by the previous ones
    failing :
    "While executing getCurrentValue in AddressURL.htm, a
    JavaScript error occurred"
    the relevan tcode :
    function getCurrentValue()
    var dom = dw.getDocumentDOM();
    var value = dom.browser.getURL();
    if (value && value.length)
    //check if is it not a temp file
    //extract the tail of the url
    var filename = value;
    var slashIndex = filename.lastIndexOf("/");
    filename = filename.substring(slashIndex+1);
    var tempIndex = filename.indexOf("TMP");
    if (tempIndex != 0)
    addRecentAddress(value);
    return value;

    You can try this simple fix -
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "earthdoctor" <[email protected]> wrote in
    message
    news:[email protected]...
    > When switching between open tabs a sequence of
    javascript errors occurs. I
    > had
    > not used Dreamweaver for about 2 weeks, and last time I
    used it with no
    > problems.
    >
    > I have tried uninstalling it, OKing removal of all files
    when asked,
    > re-installing it and updating with dwmx61_updater.exe,
    but I still get the
    > same
    > errors.
    >
    > This has rendered the software virtually unuseable, so
    any help would be
    > greatly appreciated, as I'm working to a
    rapidly-approaching deadline.
    >
    >
    > "While executing Browse_Back enabled in toolbars.xml, a
    JavaScript error
    > occurred"
    > followed by
    > "While executing Browse_Forward enabled in toolbars.xml,
    a JavaScript
    > error
    > occurred"
    > followed by
    > "While executing Browse_Stop enabled in toolbars.xml, a
    JavaScript error
    > occurred"
    >
    > The relevant code seems to be :
    >
    > <!-- Browser nav toolbar -->
    >
    > <toolbar id="Browser_Toolbar" platform="win"
    label="Browser
    > Navigation"
    > container="document" initiallyVisible="false">
    >
    > <button id="Browse_Back"
    > image="Toolbars/images/MM/back.gif"
    > disabledImage="Toolbars/images/MM/back_dis.gif"
    > tooltip="Back"
    > label="Back"
    >
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
    > command="dw.getDocumentDOM().browser.backPage()"
    > update="onEveryIdle"/>
    >
    > <button id="Browse_Forward"
    > image="Toolbars/images/MM/forward.gif"
    > disabledImage="Toolbars/images/MM/forward_dis.gif"
    > tooltip="Forward"
    > label="Forward"
    >
    enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
    > command="dw.getDocumentDOM().browser.forwardPage()"
    > update="onEveryIdle"/>
    >
    > <button id="Browse_Stop"
    > image="Toolbars/images/MM/stop.gif"
    > disabledImage="Toolbars/images/MM/stop_dis.gif"
    > tooltip="Stop"
    > label="Stop"
    > enabled="dw.getDocumentDOM().browser.getPageBusy()"
    > command="dw.getDocumentDOM().browser.stopPage()"
    > update="onBrowserPageBusyChange"/>
    >
    > <button id="Browse_Refresh"
    > image="Toolbars/images/MM/browserRefresh.gif"
    > tooltip="Refresh"
    > label="Refresh"
    > enabled="true"
    > command="dw.getDocumentDOM().browser.refreshPage()"/>
    >
    >
    >
    > presumably the next error is caused by the previous ones
    failing :
    >
    > "While executing getCurrentValue in AddressURL.htm, a
    JavaScript error
    > occurred"
    > the relevan tcode :
    >
    >
    > function getCurrentValue()
    > {
    > var dom = dw.getDocumentDOM();
    > var value = dom.browser.getURL();
    > if (value && value.length)
    > {
    > //check if is it not a temp file
    > //extract the tail of the url
    > var filename = value;
    > var slashIndex = filename.lastIndexOf("/");
    > filename = filename.substring(slashIndex+1);
    > var tempIndex = filename.indexOf("TMP");
    > if (tempIndex != 0)
    > {
    > addRecentAddress(value);
    > }
    > }
    > return value;
    > }
    >
    >

  • Graphic distortion when switching between external and built-in display (rMBP)

    Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
    Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

    Do you have intel gpy as well as other graphic card?  You may be viewing document on different gpu's.  PS does not like multiple gpu's.

  • The zoom in zoom out gesture doesn't work on my iPhone 5c. Like when opening an app it doesn't zoom out and opens.

    The zoom in zoom out gesture doesn't work on my iPhone 5c. Like when opening an app it doesn't zoom out and opens. It also doesn't zooms in while pressing the home button to return. The gesture is just like any other Android phone. Like while closing an app by pressing the home button the icons seem like zooming in and falling back to their respective places. This thing happens in my friends' iPhones but this thing doesn't happen on my iPhone 5C. Please help.. I am unable to find anything wrong with the settings either.
    Message was edited by: Prats20

    I have another query though. Is it possible to always logged into my Gtalk from iPhone? I am using an app called Gtalk Lite. But every time I double press the home button and swipe up the apps to close them from running in the background Gtalk lite logs me off. I have to log in to Gtalk lite again. I was looking for something like that happens on Android phones. You are always logged in even after you close them from running in the background. And also is it possible to log in to more than one gmail account on Gtalk in iPhone?

  • How to keep location in a table persistent when switching between pages

    Hi -
    How would I keep my last location persistent in a table when switching between pages? If I am on cell X and switch to another page, when returning to the previous page, I return to the top of the table. This can be very annoying when trying to find the same location in a large table (or even in a small one).
    Thanks.

    If by "page" you mean "sheet", you can do it. To get back to the same place you were in the other sheet, click on the sheet in the sidebar (the list of sheets/tables/charts/etc on the left). Don't click on the table, click on the sheet.

  • Auto show/hide Plug-in when switching between patches in Mainstage 2

    Hi, I was wondering if there is a way to have Mainstage 2 automatically reveal a plug-in when switching between patches. For instance, when switching to a Clav patch, have it reveal the EVD6 plug-in. Then, if you switch to a Rhodes patch, it automatically closes the EVD6 and reveals the EVP88.

    As far as I know, no. I haven't found a way to do this. It would be useful in certain setups.

  • Flash CS3: Serious lag when Switching between Applications

    I've got a serious problem with Flash CS 3 on my Macbook Pro,
    which makes it almost unworkable.
    When I'm working in flash, switch to another application
    (Mail, Illustrator, any...) and then switch back to flash. the
    program freezes for at least 9 to 10 seconds: The Menu's are all
    transparant and greyed out, and the only thing I see is the beloved
    "beachball" spinning.
    Needless to say that this makes it very hard to work with the
    program, since switching between apps is a big part of my workflow.
    Is anyone experiencing the same problem?
    I have re-installed the whole CS3 suite (twice) and even
    cleaned up my computer and did a clean install of OS X!!
    I'm running on a 15" mac book pro (2,33) with 2gig memory,
    bought last may.
    Any help is welcome,

    I'm having the same problem as well. I was using Flash 8,
    thought I would upgrade to Flash CS3 and solve the problem but that
    was no good. There's still a long lag time when switching to Flash
    from any other program. Not sure if it's a Memory problem or a Font
    problem. Any word on a solution for this annoying problem?
    I'm running a PowerPC G5 with dual 2.0ghz processors and 2.5
    GB of ram.
    Thanks!

  • Error when switching between drafts: "The instruction at "0x009f6487" ...

    Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
    The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
    Click on OK to terminate the program
    Click on Cancel to debug the program
    I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
    Any help or suggestions are much appreciated.

    Can you please try clearning the Contribute preferences?
    To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
    Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

Maybe you are looking for