IPod only working as a storage disk

For some reason, my iPod no longer opens iTunes automatically when I plug it in, but opens up as a storage disk. How do I revert it back to opening iTunes when it is plugged in?

Connect the iPod to the computer. Open iTunes. When the iPod appears in iTunes go to edit-->preferences. Click the iPod tab. Make sure automatically open iTunes when iPod is connected is checked. If it is, uncheck it, click OK, and then go back and recheck it and click OK.
Also, make sure enable disk use is not checked.
btabz

Similar Messages

  • HT201401 4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out l

    4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Ipod only works in fm transmitter

    my ipod only works when plugged into the fm transmitter. Once i remove it, it turns off and i can't get it to turn back on. It also isn't being recognized when i plug into computer everything from my itunes is still there but the ipod won't even turn on. When plugged into the transmitter the apple first comes on then the menu.When i turn it off everything on the screen slowly fades away. HELP!! thanks

    This exact thing happened to my first gen touch. Sadly, I don't have good news for you. First side of the earphone jack stopped working. A few weeks later the headphone jack wouldn't work at all. (Using the docking slot along the bottom still worked fine the whole time, just as you said.) Unfortunately it's not possible to replace the headphone jack without replacing other major components inside the touch so it's very expensive to repair. I could not fix the problem and had to buy a new touch.

  • My iPod only works when plugged into a wall socket!

    Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
    Any ideas??

    Sounds like a dead battery.  You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
    B-rock

  • My ipod only works when its being charged!

    my ipod only works when its charged. when i unplug it the screen slowly fades out and i can no longer turn it on. and when i connect it to the computer it doesnt even connect! can someone please help me???!!!!
    ipod video   Windows XP  

    "my ipod only works when its charged."
    Then it sounds like a battery problem.
    Try these.
    My iPod won't turn on.
    iPod has no power and appears frozen.
    iPod battery doesn't charge.
    If none of the above help, then it may be an issue that requires service.
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.

  • IPod only works in iHome docking station - nothing else (USB, power outlet, other docking stations)

    This just started last week after I'd loaded some songs to my iPod from my laptop and it wouldn't play or display anything.
    My iPod Classic only works when connected to iHome docking station and then it seems to work fine. It won't work when connected to another docking station, to laptop through USB or to power outlet. I restored while it was on iHome docking station but that didn't seem to correct anything. When I've tried to restore off the iHome, the screen flickers endlessly and nothing appears.
    Any advice greatly appreciated.
    Long live the Classic! (Hopefully)

    Hello spinney98,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with the iPod classic, please follow the troubleshooting in the article linked to below.
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    Take care,
    Alex H.

  • Ipod only works in one ear. PLEASE HELP!!!!!!

    My first generation ipod touch only works in one headphone. I've tried 10 different pairs of headphones but with all of them the sound only plays in the left ear. It works in both speakers when i plug it into the speaker that connects to its wider slot (the opening on the ipod next to where the headphones are plugged in) but when i use a cord that connects to the headphone slot that lets me play my ipod on my cars speakers it only works on the left side speaker.
    I don't know what's wrong with it and i really need your help, so PLEASE HELP ME!!!!!!!

    This exact thing happened to my first gen touch. Sadly, I don't have good news for you. First side of the earphone jack stopped working. A few weeks later the headphone jack wouldn't work at all. (Using the docking slot along the bottom still worked fine the whole time, just as you said.) Unfortunately it's not possible to replace the headphone jack without replacing other major components inside the touch so it's very expensive to repair. I could not fix the problem and had to buy a new touch.

  • My ipod only works 1meter away from router

    My ipod touch only works 1meter away from my BT Hub, how far should the wifi signal reach? my PC works at least14meters away, please help!

    Does it perform the same with other networks?
    1 meter is too short . Is the PC 4 or 14 meters? 4 meters is too short too
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem with all networks then make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod only works from 1 side of my headphones

    My iPod headphone jack only works on 1 side of the headphones but not both sides of the headphones. I try every headphones my friends have and my iPod is causing this problem. How can I fix the headphone jack inside my iPod??

    Have it replaced.  Either send it into Apple for replacement for a flat fee or send it to a third party repair comany to actually replace the part of for you at a cheaper cost.
    Here are Apple's pricing options.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • IPod only works while plugged into computer!

    Help! My 2Gb iPod nano went through the washing machine, and after a few days of drying out, it only works while plugged into the computer. As soon as I take it out, the screen goes blank. I can access all my music, podcasts and photos while it's plugged in. I have tried the 5 Rs to no avail. Anybody have any ideas?

    I also sent my nano through the wash and I found that if you get an ac adapter and plug it in for a few hours you will have battery life. This made me very happy however I have noticed that I can not turn the ipod off unless the hold button is on. Battery life is also not as long but long enough for me. Hope this helps

  • IPod only works when connected to computer?

    When I plug in the iPod Nano to charge, then "eject the disk", I am able to use the Nano. The screen works and shows that it is fully charged. When I removed the USB cord from the Nano, the screen gets dim then after 2 or 3 seconds, fades to black and does not work. How do I fix this? I tried holding the 'select' key with the Menu key to do a restart and nothing happened at all. I have looked on these forums and read variations of this question, but no one has ever answered it!
    If the battery is dead and needs to be replaced, I will be VERY upset because this iPod has only been used twice ever.
    ALSO if the battery is dead, can I take it back to the store and will they replace it for FREE? I got this as a gift (in the package and everything) so I know that it has not been used before but obviously I do not have a receipt or anything like that. And I do not even know where an Apple store is in my area since they only seem to be in wealthy places.

    If this is a 2nd Generation Nano, and it has only been charged twice, I can guarantee that the battery is bad. Lithium ion batteries need "exercise" and should have at least 1 charge cycle monthly. You can be upset all you want but the lack of use is what did in the battery.
    You can send it to Apple and pay them to put in a new battery or try a 3rd party site, such as http://www.ipodjuice.com

  • How the cluster works when shared storage disk is offline to the primary ??

    Hi All
    I have configured Cluster as below
    Number of nodes: 2
    Quorum devices: one Quorum server, shared disks
    Resource Group with HA-storage, Logical host name, Apache
    My cluster works fine when either the nodes looses connectivity or crashes but when I deny access for primary node ( on which HA storage is mounted ) to the shared disks.
    The Cluster didn’t failover the whole RG to other node.
    I tried to add the HAstorage disks to the quorum devices but it didn’t help
    Anyways i can't able to do any i/o on the HAstorage on the respective node
    NOTE:This is the same case even on Zone cluster
    Please guide me, below is the O/P of # cluster status command === Cluster Nodes ===
    --- Node Status ---
    Node Name Status
    sol10-1 Online
    sol10-2 Online
    === Cluster Transport Paths ===
    Endpoint1 Endpoint2 Status
    sol10-1:vfe0 sol10-2:vfe0 Path online
    --- Quorum Votes by Node (current status) ---
    Node Name Present Possible Status
    sol10-1 1 1 Online
    sol10-2 1 1 Online
    --- Quorum Votes by Device (current status) ---
    Device Name Present Possible Status
    d6 0 1 Offline
    server1 1 1 Online
    d7 1 1 Offline
    === Cluster Resource Groups ===
    Group Name Node Name Suspended State
    global sol10-1 No Online
    sol10-2 No Offline
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    global-data sol10-1 Online Online
    sol10-2 Offline Offline
    global-apache sol10-1 Online Online - LogicalHostname online.
    sol10-2 Offline Offline
    === Cluster DID Devices ===
    Device Instance Node Status
    /dev/did/rdsk/d6 sol10-1 Fail
    sol10-2      Ok
    /dev/did/rdsk/d7 sol10-1 Fail
    sol10-2 Ok
    Thanks in advance
    Sid

    not sure what you mean with "deny access" but could be reboot of path failures is disabled. This should
    enable that:
    # clnode set -p reboot_on_path_failure=enabled +
    HTH,
    jono

  • My iPod only works when its plugged in, as soon as I take it off charge it turns off. Is this unfixable?

    Ive looked up ways to reset th ipod and nothing has worked, for it only turns on when plugged in and wont turn on when it isnt.

    Sounds like the battery needs to be replaced. Apple can do it or other authorized service centers as well.

  • IPod only works on the Power Adapter

    The only time that my iPod works is when it is hooked into the Power Adapter. Once removed it shuts down. When placed on the USB cord connected to the computer the low battery sign is displayed on my iPod screen.
    Looked through the troubleshooting guide but couldn't find anything for this specific problem. Any help would be greatly appreciated.

    bump

  • My ipod only works on my docking station. Any help would be great!

    I have a 4GB ipod I got in Dec. and I got a docking station in May and I use them all the time. Well I left my ipod plugged into the docking station for a couple days, and it works fine on it, but when I tried to connect my ipod to my computer,it just blinked with an apple and a line over and over again. I tried turning it on to listen with my headphones and I got absolutely nothing, it did not turn on at all. I have tried everything that apple.com provided and nothing has worked so far, so anybody that might know how to fix this, please help!
    Thanx

    Hi Blane756,
    Thanks for using Apple Support Communities.  This article has steps for a different issue, a gray screen at startup, that I think would still be worth trying for your freezing issues:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Cheers,
    - Ari

Maybe you are looking for

  • How to find out company code from a plant ?

    Hello friends, I have to modify a program that uses FM "BAPI_COMPANYCODE_GET_PERIOD".   For that, we have to export company code ID.  Currently it is hard coded with one company code.  Now we want to make this program usable by all company codes.  So

  • IBook G4 - Upgrade or Buy New System

    I need help making a decision: is it reasonable to upgrade my iBook G4 (RAM, operating system) (+bigger hard drive?); or do I need to abandon it and buy a newer system? My considerations are: 1) DC-inboard is probably flaky. Even with a new power sup

  • Error in RWB for EbXML Message

    Hello Experts, We are facing an issue with the Seeburger Adapter. When we trigger message TO THE sEEBURGER sYSTEM USING THE eBxml adapter, the message is successfully processed in PI 7.1 and shows a checkered flag. But on analyzing the related messag

  • ACS User Database Export

    Is it possible to export the user database stored in the Cisco Secure ACS Database to some file. I need to see all the user accounts and their group assignments etc to be able to do reporting on this. Any ideas?

  • Cross Tab Formatting a summarized field

    Hi All,     I have a field that is summerized in my crosstab. However, I want to be able to take that number and format it in HH:MM:SS and am having difficulty accomplishing this. In my drill down reports I was able to do this with ease. Could someon