Ipod partially recognized by windows and not at all by itunes

I haven't been able to find any1 else with this problem but when I connect my ipod to my computer(using either USB 2.0 or firewire) the "Do not disconnect" screen appears on the ipod and then it just sits there. (it also charges but ya) The ipod does appear in the Device Manager but doesn't appear in "My Computer" as any kind of disk. I tried restore, disk mode, update(took a long time and then said "can't mount ipod"), uninstalling ipod drivers and itunes and reinstalling them, restarted numerous times; all with no effect. Also, my computer does this with other people's ipods as well. I'm slightly frustrated as this seems to be a completely unheard of problem.
custom   Windows XP Pro  

hmmmm.
-when I first tried to install the drivers windows said they were up to date, then I clicked uninstall drivers and tried updating them but still had the same problem.
if the ipod is asking for drivers, but Windows says they are up-to-date, we'd better check on the possibility that it's a "fake" message.
i've seen a couple of cases lately where that message seemed to be being caused by a general connection problem that was horribly confusing Device Manager. (in one case it was a bad cable, in another, it was apparently some scruffiness on the PC's hard drive.)
so, let's see if you've got one of those. let's try the "general connection problem" techniques from this document and see if any of those help:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
love, b

Similar Messages

  • My ipod is recognized in windows but not in itunes. I ran the troubleshooter and followed all of the steps to fix it....itunes still does not recognize my ipod.  Anyone know how to fix this?

    My ipod is recognized in windows but not in itunes. It shows up in devices and gives me the ok to eject prompt, so I know that the connection is good. I ran the troubleshooter and did all the recommended fixes.  Hours and hours later, I still have the same problem. I uninstalled itunes and all its folders, restarted the apple device services and changed the drive letter. Checked my security settings and everything else I can think of. Does anyone know how to fix this?

    Did you remove all Apple related software including QuickTime, Safari, Software Update utility for Windows, etc using the exact instructions in this Apple support document?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Are you plugging the iPod into a high powered USB 2.0 port and not a USB or similar?  Have you tried different cables to help rule out a faulty or damaged cable? 
    Does it connect to iTunes okay on another PC or Mac?

  • IPod is recognized in Windows, but not in iTunes.

    Ive followed the support site on what to do if the iPod is recognized in Windows but not iTunes... but to no avail.
    ive had a 20GB photo thats been working o.k. (need to send it in) but now neither it nor my new 30GB Video will appear on iTunes... just in windows.... any suggestions? or should i just call up apple...
    p.s. i know its not the iPods cause they update fine on my sisters laptop...

    Does it say Cannot Mount iPod?
    Is the software on your computer up to date? You may want to try reinstalling it as well...
    iTunes
    iPod Updater
    Update iPod's Software
    Also, try right clicking on the iPod (in My Computer) and go to format. Does anything happen?
    btabz

  • My ipod is recognized by windows but not itunes

    Ok, I had trouble with my 4gb black nano when I had to install it, i used TrevorQ's tip and it worked.
    Now I need to update some songs on my ipod and it wont recognize it now
    6.05.20 Itunes
    2006-03-23 Ipod Updater
    I cant end the "IpodService.exe" process

    See if anything here helps: iPod shows up in Windows but not in iTunes

  • Ipod is recognized by windows but not itunes

    i got a 4gb nano and when i connect my ipod to my computer it dosnt show up in itunes i reinstalled everything but it still wont work

    hiya!
    okay, we'd better check through the usual suspects:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

  • Ipod mini recognized by pc and not itunes

    So I'm this close to demanding a refunding and never looking at another ipod product ever again, but I'm going to make one last try. This is my second Ipod in having only owned it for 3 months.
    My Ipod mini when plugged in is recognized by my computer and says the device is ready to be used. When I open itunes the icon for the ipod sometimes appears. When it does grace me with it's presence and I try to transfer music it doesn't actually do anything. It looks like it's transfering, but nothing new appears on the ipod when it is finished.
    Buddy at apple says it might be a driver problem. How do I fix that? Windows is up to date and it's the one providing the drivers for the usb ports. My printer and camera all work just fine off the other ports in the grouping.
    Someone must know something. And please no links to apple manuals or other info they have to offer. None of it works and I have tried it all. (ie restoring, restarting, software removeal and re installation, restarting computer, up to date programs....it goes on and on.)
    Help!
    ipod mini   Windows XP  

    I hear ya angie, I and MANY others (see post started by KorosDragon) have had this problem. My problem is, sometimes I plug it in and everything is fine and dandy (iPod mini recognized by iTunes, I can transfer music fine, etc.), but other times like today, nothing is working. I'm at the point of selling this stupid thing and buying something more Windows-compatible, like an iRiver. So if you're under warranty and can just return yours and get a refund, I highly suggest you do so and find an mp3 player that's more compatible with Windows and a PC. Apple clearly has no clue as to what's going on with this issue (from reading other users' posts about how fruitless visits to the Apple Store have been), and it isn't in their best interest to find out.
    Dell   Windows XP  

  • IPod nano recognized in Windows but not in iTunes

    My iTunes won't recognize my iPod. And this message always pop-up : iTunes cannot read the contents of the iPod nano.Please use the iPod Software Updater application to restore the iPod to factory settings.I read the manual, but I just can't find anything about restoring to factory settings !?!? I'm new to iPod and I'm begining to lose interest for my iPod nano !!!!

    Found another, this one seems to be just right for you!
    iPod appears in Windows Explorer but does not appear in iTunes
    Just for a heads up, try typing into the search field the error message you get, sometimes it has an article on it.

  • IPod shuffle recognized in windows, but not in iTunes? Anybody please help!

    I need help... my BRAND NEW shuffle (4th gen) will not come up in the devices list... iTunes will not recognize anything is plugged in even though it shows on the H drive in windows....

    Have you checked that Windows has downloaded the driver?

  • From Mac to PC. 3rd gen.iPod shows in Windows and not in iTunes

    3rd Generation iPod version 2.3
    Installing on a PC using Windows XP Home Edition
    My son gave me his old iPod having just bought the newest version. I already own an iPod shuffle and have not had any difficulties. I would mention however that my son used the iPod with his Mac computer.
    My difficulty is that the iPod shows up in Windows and not in iTunes. I just cannot get iTunes to recognize this iPod.
    On the settings on the iPod it states my name, the format is Windows and funnily enough all my playlists have been downloaded but not the tunes.
    I have uninstalled the iPod shuffle and uninstalled, reinstalled the software registering the new iPod to me and have gone through all the points mentioned on the Apple site on http://docs.info.apple.com/article.html?artnum=93716 many times.
    Because I kept getting the balloon “One of the USB Devices attached to this computer has malfunctioned and windows does not recognize it” (Even though it appeared in Disk Drives in Device Manager) I have bought and installed a USB 2.0 port PCI card. I really thought this would be the answer. However the usual balloons came up the first time (after having uninstalled and reinstalled the software yet again). The balloons stated that the hardware device has been installed and ready to use. However nothing appears in iTunes. Upon reconnecting the iPod again in whatever port I am still getting the balloon message “USB device attached to this computer has malfunctioned……………………..” All the USB port function properly with other devices (including the iPod shuffle when the software is uninstalled and installed again giving the shuffles details) and on the Device Manager windows they show as working properly. Still on the iPod “do not disconnect” and nothing on the window in iTunes and everytime I plug it in the same old notice comes up.
    Any ideas of a solution would be greatly appreciated.
    Dell Dimension 3000 Windows XP

    No reply from this discussion group but if this helps anyone else it would be good.
    I reformated iPod by right clicking on disk in My Computer and clicking format.
    After many different notices when trying to open I went to http://docs.info.apple.com/article.html?artnum=304996 and followed the instructions.
    The problem was solved and my iPod now appears in iTunes and I am able to sync.
    Millbrookman

  • What do i do when my ipod is recognized by windows but wont be recognized by itunes

    my ipod is recognized in windows but not itunes

    Hello chickaling
    Check out the article below to troubleshoot your issue to get your iPod to show back up in iTunes.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    -Norm G.

  • TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    not recognized by anything: http://support.apple.com/kb/TS1369
    recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
    solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
    (make sure you go to the next slides.

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • TS1363 I'm trying to set up my new ipod nano, it appears in windows and not in itunes- if I reinstall itunes, will the files of other ipod users on the computer be lost?

    I'm trying to up my new Ipod Nano, it appears in Windows and not in Itunes, if I reinstall Itunes, will files previously set up by other Ipod users sharing the computer be lost?

    You said " I sign in but her music list shows up mixed with about 1/3 of mine."
    Sign in where?
    What music list?
    It also sounds like that computer is not authorized for the account. You can only have 5 computers authorized for one account. If yo go to iTunes>Store>View account and then sign in it will tell you how many (but no what computers) are authorized. There is no way to find out what computers are authorized.
    You can deauthorize all computer once a year.
    See:
    iTunes Store: About authorization and deauthorization

  • Fix for "iPod shows up in Windows but not in iTunes"

    This is a possible fix for those with the "iPod shows up in Windows but not in iTunes" problem. This also fixes those have the update/restore problem (ipod disconnects after clicking update/restore in itunes)
    SOLUTION
    SOLUTION
    I had the exact same problems before, iTunes doesn’t recognize iPod after connecting it, I had to use the restart iPod Service method to get it working.
    I tried this on my second computer and it worked perfectly, iTunes recognizes iPod every time I plug it in.
    I compared the process/services opened in both computers, and I turned on some services which were previously on disable(excluding iPod Service). Unfortunately I forgot which services it was, so I took some screenshots and compare these with your services.
    After modifying the services, I tried plug and unplug the iPod several times without closing iTunes, iPod was instantly recognized by iTunes every time!
    I attached the links to screenshots of my automatic services and manual services, ignore the service if its not on your list!
    For those don’t know how to open Services, Start -> Run -> “services.msc”
    http://img214.imageshack.us/img214/6200/automaticservicesec2.jpg
    http://img216.imageshack.us/img216/3700/manualservicesce3.jpg
    -If anyone know the specific services required to be turned on, please reply in this thread.
    -I am using the 2nd Gen Nano 2GB version with latest iTunes.
    IBM T43 Windows XP Pro
    IBM T43 Windows XP Pro

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

  • Ipod in windows, but not in updater or itunes

    I followed the help/support links for both updating the ipod and the "windows sees it but itunes doesn't" but none of the tips worked. I reinstalled itunes and have the most recent ipod updater installed, but when i go to update it says "Plug in an ipod to update it." However, it is plugged in and recognized by windows and shows up on My Computer. The same problem in itunes: under file - "Update ipod" is not a selectable option. Please help!

    Welcome to Apple Discussions.
    You mean you have tried the things here: iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes
    Or if you are using a laptop: iPod not recognized when connected to Windows laptop via USB?
    Sorry but please confirm. Any other things such as strange noises?

Maybe you are looking for

  • Creating a Survey - Novice Javascript Question

    Hello, I am extrememely new to Javascript.  I have been doing some research online and copy/pasting code to create the results I need.  I am trying to create an online survey in Dreamweaver in which users select buttons to answer questions and then t

  • Source directory of file adapter

    Hi. I want to use windows share directory as source directory of sender files adapter. So we need set the path UNC name. for example. <hostname>\d:\sourcedirectoy Does this setting is supported? And are there any problem? regards,

  • Dynamic CRM connect outlook Client with different domain

    Hi Guys, I had installed CRM 2011 in cloud with different domain. If I use browser is working fine just that when i use Outlook client it show  15:24:16|  Error| Exception : The request for security token could not be satisfied because authentication

  • QM_QCERT_01 - DISPLAY MODE to CHANGE MODE

    Dear Experts, I had make a copy of SAPScript form-QM_QCERT_01 in to ZQM_QCERT_01 and does some changes, the changes/enhamncements are working fine but i want to add a new window of footer for which it is not allowing since all its attributes are in d

  • Final Cut Express BLEEEEEEEP! (ITS DRIVING ME NUTS!!)

    OK, so i got final cut express last night, and it works fine apart from when I import a clip I get a message saying unrendered - which pecks my head so much - but I found a way to get past that but when im past and it and I play the video all i get i