Ipod permanantly stuck with apple logo and not responding!

help help I had some problems changing my 3G ipod from a windows formatted ipod to a Mac formatted ipod. i tried reformatting using disk utility on the mac... and it took a really really long time so i disconnected the ipod... and now, the screen shows an apple logo... permanantly! and when i try restarting the ipod it does restart but it wont even switch off...
when i connect to my mac or my pc, no hard disk volumn shows up so i cant use itunes to reset ipod... what should i do!!??????? is there someway to force my comp to aknowledge that there is something at the end of the USB wire....

OMG i fixed it!!! okie what i did was... http://discussions.apple.com/thread.jspa?threadID=715583&tstart=75 follow the diagnostic thingy of pressing RW/FW/SELECT... all the other tests didnt really work well but when i randomly tested USB driver or something, it appeared on my mac!!!! so from there i was able to use itunes to fix it =)

Similar Messages

When i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour .

when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>

Wrong Forum

My ipod is locked on the initial screen that appears black apple logo, and not respond to any button, please someone knows I do? PLEASE it is urgent

My ipod is locked on the initial screen that appears black apple logo, and not respond to any button, please someone knows I do? PLEASE it is urgent

Try to connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore

TS3694 hi i recently updated into ios 7.0.4 now i want to fully restore my ipad to resell but when i restore it it got stuck with apple logo and progress bar with 45% completed as firware file is downloaded using ipad 4 wifi itunes 11.3.8

hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

Ipod mini stuck with apple logo displayed

My ipod mini only displays the apple logo, will not reset, and is not recognized by the computer (doesn't open iTunes or appear on the desktop when I manually open iTunes). Has charged all day so battery should not be the problem. When I try to reset, the apple logo will briefly disappear then immediately come back on. Cannot get anything else to display. Any suggestions??

Thanks. I tried to put it into disk mode but it wouldn't do it. The apple logo still displays, but now it blinks when plugged into the computer, and stays solid when plugged into the AC adaptor. It is my son's iPod and he just told the battery hasn't been holding its charge as long as it used to. But this sounds like more than a battery problem to me. What do you think? It was purchased in Dec of last year. Thanks for all your effort to help me!
theresa

My iPod is stuck on apple logo and I get a 1434 Error when trying to restore it.

Hello, I hope somebody can help me. I have a 120 gb ipod classic (6th generation). I purchased it a long time ago. It was working fine for a few years and then suddenly it's been stuck on the apple logo ever since.
I tried to restore it by putting in on disk mode and connecting it to my Mac. My iTunes recognizes the device (But my Mac doesn't!). On iTunes, I tried to restore it, but I get an error message 1434, stating that the restoration could not be completed.
I read that I should try to erase the drive with Disk Utility, but when I get there, the button to erase the drive is unclickable. I tried to partition as well, but it also did not work (maybe I am doing it wrong? Could somebody direct me with better instructions?)
I'm wondering if the hard drive is dying, or if I have a bad ribbon, or if the logic board itself is broken. Not sure what method of action I should take. I can't even get into the diagnostic screen.
PLEASE HELP!

Hello E1777,
You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
iTunes 11.0.4
http://support.apple.com/kb/dl1614
Thanks for using Apple Support Communities.
Regards,
-Norm G.

IPad 2 stuck on apple logo and not charging but keeps rebooting without getting to the lock screed

My iPad 2 ran out of battery last night while I was playing a game on it, it keeps attempting to reboot but only gets as far as the apple logo before powering off, displaying low battery screen and rebooting again, it has been on it's charger all night, I have tried resetting it but it just starts up again, can anyone tell me how to force it to shut down so it can try to charge before i try it again? (I can't get to the lock or the screen and pressing the power button and the home button together won't work) I thought the charger/cable may have been the problem but no cable or charger seems to work.
It doesn't seem to matter to it if it's connected to a computer or not

I am having the exact same problem!! did anyone figure anything out with this?!?!?!
it just keeps trying to reboot and it only gets as far as the logo then it'll reboot again!!

My iPod is stuck in apple logo and after 1 min. if comes to download something but it stuck there please help soon Thank U

Please Help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My iphone 4 after update ios wont turn on and stuck in restore with apple logo and loading bar not move

When I update the ios on my Iphone 4 it wont turn on and I tried to restore it, but it stuck in restore with apple logo and loading bar not move at all, I contact apple support and they tried to help me but nothing work, then they told me to send it to replace it and I need to pay $149, that's mean if anybody has any problem with his iphone even the problem from apple software you need to pay, that's not fair at all.... I will try to sale all our apple device and by Samsung device to resolve this problems.

I believe this means that it is bricked, just sell it for parts, to someone like me

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.

Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.

While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

Iphone 4s is stuck on apple logo and the power button is broken.......Also, the phone has not been jail broken......HELP?

iphone 4s is stuck on apple logo and the power button is broken.......Also, the phone has not been jail broken......HELP?

Greetings bruce0bruce,
It seems your device is not functioning, and the Sleep/Wake button isn't working as well. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Imac will not boot up, chimes with apple logo and beach ball spin??

imac will not boot up, chimes with apple logo and beach ball spin?? after installing adobe flash and up graded apple softeware

If your iMac came with or is running Lion, startup holding either the Command-R keys or the Option key and select the recovery partition and then use Disk Utility to repair the Macintosh HD.
see > OS X Lion: About Lion Recovery
If your running Snow Leopard or earlier OS X, pop in your Install DVD and startup holding either the Option or C key, then open and use Disk Utility to repair the Macintosh HD.
see > Mac OS X - Using Disk Utility to Repair a Disk

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

Maybe this might help.
http://support.apple.com/kb/TS2570

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Ipod permanantly stuck with apple logo and not responding!

Similar Messages

Maybe you are looking for