Ipod photo freezes when using IM3 speakers

I have a 60gb ipod photo that freezes up when I use it with my altec lansing IM3 speakers. Sometimes it will play for a couple of hours, other times it happens after only a few songs. It works fine after I reset it but it often freezes up again a little while later. Anybody have the same problem? Or any suggestions?

I'm having the same problem. I have a 40G ipod. All of a sudden it doesn't work when I dock it in the im3. It plays about 20 sec of a song then goes to the next and freezes. Also makes a loud clicking sound. It works fine with the earbuds.
Any ideas?

Similar Messages

MacBook Pro freezes when using any app other than the web browser.

My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

IMac 10.6.2 freeze when using iSight

Hello
i have Problems - after i upgrade to 10.6.0 from 10.5... everything was ok .
Then i installed 10.6.1 - still not big problems sometimes hang up - only power off helped .
Since i use 10.6.2 - System freeze when using iSight , ini Chat or Skype after 20 sec.
I tried to go back to 10.6.1 - freeze after 20min .
With 10.6.0 so far no freeze .
I need help .

TnT Sweden wrote:
Hello , once again
i tried these steps with reset , .... did not work .
Also in another account .
So i think i will try to make a clean Installation .
As i am "new" into Mac - what will be the best way .
I had Leopard from the beginning - now bought Snow Leopard .I have Time Capsule for Backup.
My questions - with what System CD i should start to make the clean install ?
10.5 or 10.6 ?
And How ?
What Data will be lost - or is all backup with Time Machine like Photos ,......
Thanks in advance -
If you follow your plan, you will learn a lot and not be nearly so "new" to Mac. Here are my responses to your latest questions/statements:
So i think i will try to make a clean Installation .
In our jargon, a "clean" install means that you will erase your disk and individually reinstall your system and applications, and then restore your data files. This method is very thorough and will give you a pristine system, but it requires considerably more of your time and effort than other methods that may correct your problems.
Easier alternatives are available for your consideration. Before you undertake a system reinstall, read the rest of this post and then study this document and the links in the document that are applicable to your problem and plans:
http://support.apple.com/kb/TS1388
If you decide to reinstall your system, carefully consider your installation options:
http://support.apple.com/kb/HT1545 (also applies to OS 10.6)
As i am "new" into Mac - what will be the best way .
"Best" can mean different things to different people. For example:
• The method explained in the User Guide (manual) that came with your Mac is the easiest way.
• The "Erase and Install" option from http://support.apple.com/kb/HT1545 is quicker to reinstall, but requires more work for apps and data after the OS is installed.
• Archive and Install with the "Preserve user and network settings" option eliminates the need for reinstalling apps and reconfiguring network and other user settings by "preserving" these things during the OS reinstall. Unfortunately, it sometimes also preserves the problem that is causing your difficulty.
• Secure erase before installing OS assures that NOTHING unwanted remains on your disk to cause problems after the reinstall. One pass of writing Zeros is sufficient for your purpose. Note that secure erase will take hours, depending on the size of your disk. The help article below applies to your 10.5&6 as well as the 10.4 it states,:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1011.html
Perhaps easiest of all (as least for Time Machine users) is to use your Mac's Leopard Install DVD and your Time Machine backup to "Restore" your system to a configuration dated BEFORE you did the update that has caused your problems. This method will get you working quickly, but it will not help you use Snow Leopard. If you have not already figured out how to do this "Restore," see:
http://support.apple.com/kb/HT1553
The section entitled " Using Disk Utility" will help you use your Time Machine backup to take your entire system back to when Leopard was working. After it works again, either stay with Leopard, or uninstall or update whatever software is causing your Snow Leopard conflict before again updating to Snow Leopard.
My questions - with what System CD i should start to make the clean install ? 10.5 or 10.6 ?
Use Leopard Install CD if you want to backup to Leopard.
Only use Snow Leopard if you want to try a fresh install of SL to see if you can get it working.
And How ?
Depending on your needs and whether you bought your Mac and SL update locally, and especially if your time is valuable to you, the best way may be to contact your retailer for an appointment so he can either help you or fix your problem for you. If you can use this as a training exercise, you will find it easier to do than to read and write about, and you can ask questions during the process. If you retailer does not consider proper installation of the SL software you bought from him to be part of his service, and if he offers "One to One", you may find it well worth your time and its cost:
http://www.apple.com/retail/onetoone/
If you have plenty of time, or if you merely like doing things for yourself, follow the instructions for the Disk you are using (or the instructions in the links I cite above if you want to try one of those methods.) Remember, you can try an easy/quick way first in case it works without all the manual effort on your part. If that fails to correct your problem, you are only out your time. You can try the next easiest way, and keep trying increasingly complex methods until you find the one that works for you.
What Data will be lost - or is all backup with Time Machine like Photos ,......
This answer varies depending on which method you use to restore your system or reinstall your OS:
• NOTHING IS LOST when you Archive & Install
(if you "preserve user and network settings" before installing)
• EVERYTHING IS LOST when you secure erase.
• Other methods may keep data but lose application or user configuration settings.
(1) I use SL on two Macs and it work GREAT on both. I WANT to use SL because I like it MUCH better than Leopard.&ensp:You did not ask this, but here is how I would proceed to get SL working:
♦ Unless you already have it, I would make another, separate, backup of all important data in addition to the one you already have in Time Machine. One backup is not enough for me. In addition to your music, photos, and other data files, consider items like those listed here:
http://support.apple.com/kb/HT2980
♦ THEN, I would securely erase the startup disk and follow the instructions that came with the SL DVD to install SL.
♦ Immediately after the restart that completes the install, I would use Mac's Disk Utility to repair permissions.
♦ Then configure your internet connection, and download and install the Mac OS X v10.6.2 Update (Combo):
http://support.apple.com/kb/DL959
♦ Immediately after the restart that completes the Combo Update, repair permissions again.
♦ Once you have reinstalled SL, use  > Software Update... to update any other Apple software as needed. I repair permissions before and after any installer than asks me to enter my Administrator Password.
♦ Now you can test your iMac using http://support.apple.com/kb/HT2090 to verify that the problem is resolved. If your problem persists at this point, see your Apple Authorized Service Provider for professional help.
♦ You can restore your data files either now or after reinstalling third-party items.
♦ Now, you can reinstall necessary third-party software. Install only one item at a time and test thoroughly before adding another so you can tell if one of them is causing a problem.
(2) If you would rather retreat to Leopard and not bother trying to fix SL on your Mac, the easiest fix will be to restore your Leopard system from Time Machine. You can then restore any data newer than your last working Leopard system from your backups.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

After i updated to 10.7.5 my mac keeps freezing when using Safari

After i updated to 10.7.5 my mac keeps freezing when using Safari, I've to restart it everytime. What's the problem with 10.7.5? Is this a known problem? How can I fix it?

Go Here > http://support.apple.com/kb/DL1582 and download and Install the Combo Update.
It is Safe to install over existing.
After the Successul Install be sure to Restart your computer.

My iMac freezes when using Firefox

My iMac freezes when using Firefox. We have to restart our computer.

TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams

Grrrrrr.... ipod Mini freezes when connecting to mac

when i connect to synch with itunes -
itunes does not recognize ipod
ipod freezes with regular screen (not the "do not disconnect" screen)
itunes recognizes my 40GB ipod and synchs fine; just not the mini
i have done the following with no success -
reset the mini (over and over)
put it in disk mode
reinstalled latest updater (ipod still freezes when connecting)
what could be the matter? please help ...
iBookG4 Mac OS X (10.3.9)

See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.

Windows 8 freezing when using Firefox

When I'm using Firefox or Chrome browsers the whole entire PC is freezing.
Already posted my issue on the Microsoft Community forum, where you can read the details and the troubleshooting steps I tried:
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-freezing-when-using-chrome-or-firefox/d6bad301-6c55-4469-96cb-0ec3d43e1113
Also I found another post here on the Mozilla forum, who had the same issue and he did not seem to solve it either: https://support.mozilla.org/en-US/questions/975278?esab=a&as=aaq
Please help me to fix this annoying issue! Thx!

Well, the MS site was a bust, wasn't it?
it would help to know how Firefox is configured.
Can you send me your troubleshooting information from the Firefox installation that's having issues? This is a good part in troubleshooting.
*Navigate to <code>about:support</code> via Address Bar
*Click the button that says <code>Copy text to clipboard</code>
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Firefox has hardware acceleration set to "on" by default, but it's still young, which means some video cards or drivers might have problems with it. You can try to disable hardware acceleration to see if that alleviates your problems.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps for Firefox version 29.0 and above:
*Click the menu button [[Image:New Fx Menu]] and select Options for Windows or Preferences on Mac or Linux. For Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window, click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Note that if this issue happens in both Chrome and Firefox that it may be a system issue and not a Firefox related issue,
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I have just upgraded to Yosemite and now Photoshop Elements freezes when using spot healing or clone stamp, is there an update due?

I have just updated to OSX10.10 Yosemite and now Elements freezes when using spot healing or clone stamp.

If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!!

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys.. I have to restart to continue.
Does it have to do with the disk utility?
I already did the disc repair job

Open System Preferences - Universal Access and check whether 'Mouse Keys' are activated.
If so, then deactivate them. They could be the cause of your problem.
Stefan

When using external speakers, they won't unmute

I am using a U530 Touch with Realtek HD Audio driver version 6.0.1.7535 and Windows 10 build 10240. When using external speakers, everything works fine, except when I mute speakers they will not unmute without unplugging the 3.5 mm speaker jack and plugging it back in to the unit. Using the laptop's internal speakers does not produce the same proplem (mute/unmute works fine). I have looked at every setting and find nothing, nor have I seen this problem reported in the forums. HELP!!!

Rattle Snake wrote:
Firstly how do I know if this is a 1st or 2nd generation shuffle? Bought in May at Palo Alto Store but there doesn't seem to be anything on the packaging to tell me.
1st Gen shuffle was white, plastic, and shaped like a chewing gum package.
2nd Gen shuffle is aluminum, with a spring clip on the back and comes in silve and assorted colors...
When the shuffle is connected to the external speakers(bought at the same
time) it only plays about 5 songs and then stops.
Does it play through the earphones after this happens? Does it still have power or is the battery depleted after it stops playing?
What Brand & model are the speakers?

Test runner freezing when used with Dynamics CRM (and other apps) - Both applications freeze and never come back...

We are trying to use test runner with dynamics CRM.
MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
Tried on windows xp, windows 7 etc on various specs of pcs.

I am experiencing this same issue with
Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
issue for me seems to be sporadic and I can't
reproduce it every time.
The message I get is "waiting on application under test".
DLM

Crash or freeze when using Spot Removal

I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding can anyone help to understand what may be happening ?
Message title was edited by: Brett N

yes it is Windows 7
Date: Sat, 27 Oct 2012 14:46:54 -0600
From: [email protected]
To: [email protected]
Subject: Crash or freeze when using Spot Removal
    Re: Crash or freeze when using Spot Removal
    created by Geoff the kiwi in Photoshop Lightroom - View the full discussion
Is that Windows 7.You can look in the Help Menu in the Menu bar for Lightroom and under System Info you will find what is being asked for.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4805402#4805402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4805402#4805402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4805402#4805402. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Imac keeps freezing when using safari

my imac keeps freezing when using safari or finder
The beachball appears and I have to wait.
My safari cache is emptied, have run Disk Utility to check permissions.
Rebooted various times.
Sorted out ``the community toolbar not supported" issue and still it's happening.
Anyone any tips on what to do next??
It's a 24 inch iMac - early 2009 version
Processor is 3.06 Ghz Intel Core 2 Duo
Memory 4GB 1067 MHz DDR3
Software is OS X 10.8.2 (12C60)

I have only been able to read your reply by going online on my phone -
I started up my iMac in safe mode on Saturday morning and reran Disk Utility , no problems.
I shut it down and re started it as normal. Whilst I was able to use my Mail and MS entourage and Safari brower,
the computer was very slow and the beachball appeared briefly each time I used a program.
On Monday , it didn't recognise one of the printers and was continually hanging.
All software is up to date and I have run Disk Utility - repair permissions again.
I shut the computer down yesterday and rebooted in Safe mode this afternoon so that I could try to look in
Console.
There are 4001 messages (11-02 to 13-02)
I have only included some of the most recent
13/02/2013 15:59:33.000 kernel[0]: disk0s2: I/O error.
13/02/2013 15:59:33.350 AddressBookSync[296]: [0x7feff941fd50] |ISDException|Error| *** SyncServices Exception
Type : ISyncDataDirectoryCorruptedException
Reason : Detected database corruption: 5 (Input/output error)
Filesystem Reason : Input/output error
Database Path : */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Database Access Mode : Read Write
Open SQLite Files :
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ recordids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ constructedids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Stack Trace :
0 SyncServices 0x000000010343222c _ISDSQLiteBlowOut + 1107
1 SyncServices 0x0000000103431dc5 _ISDSQliteFullIOErrCorruptionHandler + 821
2 SyncServices 0x0000000103399dcc -[ISDDatabase(SqliteHelpers) stepStatement:] + 238
3 SyncServices 0x00000001033a1cb0 -[ISDDatabase(SqliteHelpers) runStatement:withBoundObjects:startingAtIndex:callback:context:] + 376
4 SyncServices 0x00000001033a23fe -[ISDDataDatabase updateRelationshipsForRecordsInDictionary:withRecordIds:stringTable:constructRe lationshipMap:] + 182
5 SyncServices 0x000000010339f95c -[ISDDataDatabase createDictionaryAndArray:withRecordsWithIdentifiers:constructRelationshipMap:] + 334
6 SyncServices 0x000000010339f6b3 -[ISDRecordStore createDictionaryWithRecordsWithIdentifiers:constructRelationshipMap:] + 69
7 SyncServices 0x00000001033c6dbf -[ISyncConcreteSession _newDictionaryWithRecordsPushedByClient] + 249
8 SyncServices 0x00000001033c6815 -[ISyncConcreteSession _processModifiedRecords] + 161
9 SyncServices 0x00000001033c6515 -[ISyncConcreteSession _processPushedStuff] + 488
10 SyncServices 0x00000001033c5f28 -[ISyncConcreteSession _leavePushing] + 80
11 SyncServices 0x00000001033c2380 -[ISyncConcreteSession _transitionStateMachine:] + 339
12 SyncServices 0x00000001033c37f7 -[ISyncConcreteSession _prepareToPullChangesForEntityNames:inBackground:target:selector:] + 232
13 SyncServices 0x00000001033c36c9 -[ISyncConcreteSession prepareToPullChangesForEntityNames:beforeDate:] + 37
14 AddressBookSync 0x00000001015b2d6d AddressBookSync + 23917
15 AddressBookSync 0x00000001015b1fea AddressBookSync + 20458
16 AddressBookSync 0x00000001015b1ab5 AddressBookSync + 19125
17 AddressBookSync 0x00000001015b9454 AddressBookSync + 50260
18 libdyld.dylib 0x00000001048157e1 start + 0
13/02/2013 15:59:33.353 WindowServer[113]: reenable_update_for_connection: UI updates were finally reenabled by application "Microsoft Entourage" after 104.98 seconds (server forcibly re-enabled them after 1.00 seconds)
13/02/2013 15:59:33.420 AddressBookSync[296]: [0x7feff941fd50] |ISDException|Error| *** SyncServices Exception
Type : ISDSQLiteStatementExecutionException
Reason : error executing 'rollback transaction;': 1 (cannot rollback - no transaction is active)
Filesystem Reason : Input/output error
Database Path : */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Database Access Mode : Read Write
Open SQLite Files :
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ recordids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ constructedids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Stack Trace :
0 SyncServices 0x000000010343222c _ISDSQLiteBlowOut + 1107
1 SyncServices 0x0000000103394818 sqliteExecuteWithCallbackAndOptions + 660
2 SyncServices 0x0000000103394559 -[ISDDatabase(SqliteHelpers) execute:] + 207
3 SyncServices 0x0000000103440451 -[ISDRecordStore rollbackChanges] + 57
4 SyncServices 0x00000001033c5f0f -[ISyncConcreteSession _leavePushing] + 55
5 SyncServices 0x00000001033c2380 -[ISyncConcreteSession _transitionStateMachine:] + 339
6 SyncServices 0x00000001033c6680 -[ISyncConcreteSession _processPushedStuff] + 851
7 SyncServices 0x00000001033c5f28 -[ISyncConcreteSession _leavePushing] + 80
8 SyncServices 0x00000001033c2380 -[ISyncConcreteSession _transitionStateMachine:] + 339
9 SyncServices 0x00000001033c37f7 -[ISyncConcreteSession _prepareToPullChangesForEntityNames:inBackground:target:selector:] + 232
10 SyncServices 0x00000001033c36c9 -[ISyncConcreteSession prepareToPullChangesForEntityNames:beforeDate:] + 37
11 AddressBookSync 0x00000001015b2d6d AddressBookSync + 23917
12 AddressBookSync 0x00000001015b1fea AddressBookSync + 20458
13 AddressBookSync 0x00000001015b1ab5 AddressBookSync + 19125
14 AddressBookSync 0x00000001015b9454 AddressBookSync + 50260
15 libdyld.dylib 0x00000001048157e1 start + 0
13/02/2013 15:59:33.730 Microsoft Sync Services[293]: Warning: NSBundle NSBundle </Users/name/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
13/02/2013 16:00:04.327 mds[35]: (Error) Server: Disabled store registered for scope "/Library/Application Support/Apple/Fonts"
13/02/2013 16:03:25.062 WebProcess[306]: CoreAnimation: failed to create OpenGL context
13/02/2013 16:08:21.427 WebProcess[306]: CoreAnimation: unhandled combiner function: 11
13/02/2013 16:18:13.087 WindowServer[113]: Resampling logo assets. This should be considered a bug. (height = 21)
13/02/2013 16:19:26.633 com.apple.backupd[329]: Starting automatic backup
13/02/2013 16:19:27.269 com.apple.backupd[329]: Attempting to mount network destination URL: afp://name;[email protected]/Data
13/02/2013 16:19:27.797 com.apple.kextd[11]: Can't load /System/Library/Filesystems/AppleShare/afpfs.kext - dependencies not elibible during safe boot.
13/02/2013 16:19:27.807 com.apple.backupd[329]: NAConnectToServerSync failed with error: 22 for url: afp://name;[email protected]/Data
13/02/2013 16:19:28.030 com.apple.backupd[329]: Backup failed with error: 19
13/02/2013 16:21:16.867 universalaccessd[335]: CGSGetZoomParameters: Invalid connection
13/02/2013 16:21:16.867 universalaccessd[335]: CGSSetZoomParameters: Invalid connection
13/02/2013 16:21:16.867 universalaccessd[335]: CGSSetZoomParameters: Invalid connection
13/02/2013 16:21:43.190 Finder[184]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
13/02/2013 16:21:43.191 Finder[184]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
13/02/2013 16:25:39.096 universalaccessd[339]: CGSGetZoomParameters: Invalid connection
13/02/2013 16:25:39.096 universalaccessd[339]: CGSSetZoomParameters: Invalid connection
13/02/2013 16:25:39.096 universalaccessd[339]: CGSSetZoomParameters: Invalid connection
Hope this gives some info so that the problem can be resolved and I can use my computer without further issuses.

Why does my mac book pro freeze when using photo shop

Why does my mac book pro freeze a lot when using photo shop?

What version of Photoshop are you using?
Clinton

IPod Classic Freezes when fully 'loaded'

I am not able, to synch more than ~ 23,300 songs to any of my two 160 Gb iPod classics.
When synching more than 23,300 songs, my iPods are no longer able to play any songs. In the 'About' menu, the iPod shows the wrong number of songs (i.e. 17,300 instead of 24,000) and a huge amount of 'disk space used' is flagged as 'other' (in orange). When clicking on 'Album' or 'Songs', the iPod shows the message 'No songs found'.
When synching less than 23,300, I am able to resolve this issue by restarting the iPods after synching. However, even when synching less than 23,300 titles, the iPods show the wrong number of songs, right after synching, and the huge amount of 'disk space used' for 'other'. Therefore, I have to restart my iPods every time I synch them.
So I have talked to every level at Apple's iPod support, and to list all the things they made me do would exceed the size limit of this message board. They even made me send back my original iPod Classic, and I had to wait for almost 1 month to receive my replacement. Here is a summary of my problem, that they (Apple support) have not been able to solve :
I have a very extensive iTunes collection - over 200,000 songs. All of them were ripped, using iTunes.
I use the ID tags extensively - i.e. every field is used, and the comments are filled to the maximum allowed characters.
The same problem occurs when using my old Power Book G4 (OS X 10.4.10), and on my new 2.4 GHz MacBook Pro (OS X 10.5.1).
I am using an external HD to hold my music files, which is directly connected to my USB2 port on either Laptop.
I have uninstalled and re-installed iTunes and all the firmware and software is up-to-date.
I have rebuilt my iTunes Library from scratch several times.
I have no problem, playing any of the songs in iTunes.
Thank you very much for your help.!

Perhaps?
I have the same problem, with my ipod (80gb classic) freezing quite alot), I did some research and the solution is to hold both the menu button and the middle button down together, untill the screen goes black and restarts with the apple logo. It should be fine after this. Spread the word, this was too hard to find out (it's frozen like 4 or 5 times now and I only just discovered this) - http://www.topix.com/forum/gadgets/ipod/TFCD7RF74RF71UUJ5

Ipod photo freezes when using IM3 speakers

Similar Messages

Maybe you are looking for