Ipod playback audio in mono

my ipod only plays back audio in mono (another words, i only get audio in one of the earbuds.) i've tried several pairs of earbuds (that i know work fine on other devices) on the ipod in question, but only get audio in one of the ear pieces. does anyone know how to correct this?
Windows XP

the problem is most likely the jack itself. in which case it
needs to be professionally repaired or replaced.
did you buy it with this problem?
and in that case hopefully your still under a return policy.

Similar Messages

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

IPod Playback on iPhone Has Unwanted Echo/Reverb

All iPod playback has annoying echo/reverb sound. Is this a software issue or maybe a back earbud connector? I've tried several earbuds/headphones and the problem is the same each time. I've also tried restarting.
It's running Version 3.0 software.

Same problem. Echo/reverb only heard on saved podcast playback. Streaming audio/podcast is fine. Phone call sound with external speakers is fine. Same reverb heard with and without earbuds. iphone 3G with OS 3.0.1. I have tried reseting and erasing all. Same problem on recover from backup. I guess if I had the time I would reset and erase, then reinstall just OS 3.01 and retest. Maybe a conflict with one of the apps? Recent apps I've loaded include NPR News, KAYAK, reQall, Racers, and Medscape, but my kids are always loading new game apps.

Design flaw in 'Play stereo audio as mono' of Universal Access Hearing-tab

The option to 'play stereo audio as mono' that comes with OSX 10.6 does not work as I expected.
When I enable this option it sounds like only one of the two channels becomes mono, while the other one does not sound mono to me.
It's hard to notice this, because the total sound does change to 'less' stereo.
I've done some testing with different soundcards and testing signals, and found out that when the option is enabled, the mono signals are routed incorrect.
While the right channel becomes mono, the left channel seems to be something else; I'm not sure if it's the original left channel of the stereo signal, though.
I have reason to believe that the resulting mono sound on the right channel correctly is the 'monofied original sound', but that from the left channel.
The resulting mono sound on the left channel sounds like the original left channel of the stereo sound, maybe added with the mono sound of the right channel.
Why do I think so? When using a sound card with more than two outputs, I can clearly see that sound is being sent to the second and the THIRD output, instead of the first and the second output, immediately after I enable mono. Resulting in output on THREE channels:
original left
monofied (left)
monofied (right)
On my soundcard I can disable the extra outputs, and than I hear:
original left + maybe monofied right
monofied (left)
I think the programmer of this great feature made an 'off-by-one error', consequently sending the monified output to the wrong channels;
to channel[1] + channel[2] instead of channel[0] + channel[1]
I don't know what happens to sound that is sent to channel[2] (the third channel) on a two channel soundcard.
It could be mapped to the the first channel, but that of course is speculation. Could be tested though, with the right audio signal.
I hope someone can confirm this. If more people experience this problem, maybe Apple can fix this so I can enjoy listening in mono.
I have tested this on the internal soundcard and three external firewire audio interfaces, of which 2 have 8+ output channels.
Thanks!

Thanks for the quick-and-dirty test.
Your findings are not a surprise to me.
It would be more interesting though to not use one's ears for proof.
Also, I have reason to believe that this result is valid for any two channel audio interface.
With the test below I can proof that audio is sent to three channels instead of just two, when enabling "Play stereo audio as mono" on an(y) audio interface with more than two outputs (enabled).
The test takes a little longer than the quick-and-dirty test.
If you don't have an audio interface with more than two channels of output, you can still perform the test by installing Soundflower first.
Soundflower is a virtual audio interface with multiple inputs and outputs, and can be used as an audio router or audio patchbay.
Get Soundflower from http://code.google.com/p/soundflower/ - it's free.
Here's the test …
Open System Preferences, choose the Sound prefpane and select the Output-tab
Select any audio interface with more than two channels of audio outputs as your sound output device ( Or use "Soundflower (16ch)" )
Keep the System Preferences open
Start Garageband
Create a new project
From Preferences select for Audio Input your interface-with-more-than-two-channels-of-audio ( Or use "Soundflower (16ch)" )
( selecting an Audio Output is not necessary, because we're not actually going to use our ears for proof )
Enable multitrack recording from the menu (Track / Enable multitrack recording )
Create four tracks as "Real instrument"; each one with an increasing Input Source: Mono 1, Mono 2, Mono 3, Mono 4
( the last one is just for verification )
Enable recording on these four tracks (if you can't select more than one, try enabling multitrack recording)
Open System Preferences, choose Universal Access (probably click 'Show All' first) and select the Hearing-tab
Make sure audio is played in stereo (unchecking the checkbox)
Keep the System Preferences open
Switch to the Finder or iTunes
Playback any song
Switch back to Garageband and check the meters on the individual tracks
( remember this is stereo, notice the number of channels with signal )
Switch back to System Preferences to enable mono (on the Universal Access prefpane)
Switch back to Garageband and check the meters on the individual tracks ( this is mono ! )
End of test ...
You will see that in mono a third audio channel is addressed, while there should have been only two in both mono and stereo.
The signal strength of channels 2 + 3 seem equal, and channel 1 looks much louder.
This difference in signal strength is very noticable when listening to channels 1 and 2 on separate speakers or headphone.
What is that playing on channel 3?
I must admit (against my original post) that this test does not proof that the signal on channel 1 is or is not mono or anything else; that requires another test.
One can of course record these channels and do some comparisons and subtractions or some other clever tricks.
Hope anyone can second this, preferably with an actual audio interface like Apogee Ensemble, Motu, RME, Presonus, Focusrite, etc.

I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message: [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message: [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
Never had any issues before now... any ideas?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

"Play stereo Audio as Mono"

I recently was tearing out my hair because I had mono checked (somehow). It was playing Mono through my Apogee Duet Audio interface, but playing stereo through my headphones jack on the core audio. I remembered it always worked fine in Snow Leopard, so I installed SL on a partition for testing purposes and sure enough the Duet played in stereo. So naturally I thought there was a problem with the drivers between Lion and the Duet. After much discussion with Apogee, frustration and online searching I found out about this "Play stereo Audio as Mono" business.
In your next update or release, please link "Play stereo Audio as Mono" in the Sound preferences pane as well. It is a major problem when your audio is playing in mono and you cannot figure out why because the option is hidden away in "Universal Access". As a non-impared user of OSX I have no need to go into "Universal Access".
Thank you.

Philmac88 wrote:
the setting still resets itself after restarting.
Then I'm stumped. I don't know why or what to do.
You could go around the issue by running a script at login to set this option. Here's a script I found on the net:
--script begins
on run
          tell application "System Preferences"
activate
                    reveal anchor "Hearing" of pane id "com.apple.preference.universalaccess"
          end tell
          tell application "System Events" to tell process "System Preferences"
click checkbox 2 of tab group 1 of window 1
          end tell
          quit application "System Preferences"
end run
--script ends
(It requires the "Enable access for assistive devices" pref to be enabled.)
Save it as an app in a convenient location (eg, <~/Library/Scripts>), and add it to your Login Items. It will run every time you log back in. Note that this is a toggle—if the preference is on, it will turn it off.

"Play stereo audio as mono" disabled after restart

I've been using the "Play stero audio as mono" option in Universal Access, but ever time I restart, the setting is disabled. As far as I know, this is the only setting that does this. I also have the "Balance" slider bar all the way to the left in the Sound control panel; this persists through restarts. What can I do to fix this?

Philmac88 wrote:
the setting still resets itself after restarting.
Then I'm stumped. I don't know why or what to do.
You could go around the issue by running a script at login to set this option. Here's a script I found on the net:
--script begins
on run
          tell application "System Preferences"
activate
                    reveal anchor "Hearing" of pane id "com.apple.preference.universalaccess"
          end tell
          tell application "System Events" to tell process "System Preferences"
click checkbox 2 of tab group 1 of window 1
          end tell
          quit application "System Preferences"
end run
--script ends
(It requires the "Enable access for assistive devices" pref to be enabled.)
Save it as an app in a convenient location (eg, <~/Library/Scripts>), and add it to your Login Items. It will run every time you log back in. Note that this is a toggle—if the preference is on, it will turn it off.

Turning Stereo audio to mono

I have the Sony PMW-EXR1. The camera has 2 XLR audio inputs. I took some video using 2 lapel mics plugged into each of the inputs. Input 1 recorded to the left side and input 2 recorded to the right side. I want all audio to be turned into mono. I can't figure out how to do this...ideas?
Thanks,
Dean

Also, audio that imports into Pr as stereo can be tagged as dual-mono by selecting the clips in the Project tab, and choosing Clip>Modify>Audio Channels>Mono button.
You can only do this before you edit any clips into a Timeline. Once your clip is in a timeline, this option isn't available. But, after you do this, and you drag a clip to a timeline, the audio will map to two mono tracks, instead of a single stereo track.

Playback Audio Drops in Adobe Premiere CC 2014

Hey, my playback audio drops in and out, as well as switches from left to right speaker, every few minutes. Does anyone have a solution to this? This is really harming my workflow,

I have had it happen in two separate projects now. If I go five or six autosaves back then I can open a project that works okay, but at that point there are time consuming edits that are missing.
I just tried importing the corrupt project into a brand new project and it seems to be working okay, but I'd like to prevent it from happening again.

Plantronics Voyager 855 unable to lower volume during iPod playback

I wasn't sure if this should be in 3GS or music and video, so I figured I would pick one.
I have a 3GS 32gb running version 3.1. The problem I have is during iPod playback. My Voyager 855 locks the volume slider on the phone at half way. Using the volume control ON THE HEADSET, I can increase the volume and see the volume slider on the phone increase correspondingly up to the point that the music is very loud. But, when I try to turn the music down, again using the volume controls ON THE HEADSET, the slider on the phone will only go down to the halfway point. I can continue to click the volume down button ON THE HEADSET and the button will beep along with a split second decrease in volume but as soon as the button is released the volume has not changed-it remains at the halfway point. I have this problem with watching youtube videos, everything, EXCEPT for on the rainfall app that I have. I can increase/decrease the volume all the way up or down to the point that I can no longer hear the rain or until it is so loud it hurts my ears. This is very frustrating as I would really like to use this headset while reading and for sleeping, but the iPod function is just too loud. My friend has a 3G 8gb with the exact same headset and he does not have this problem. Is this a feature/limitation of the 3GS?

Yeah, ha ha, that is my post to Plantronics and their reply to me. I tried what you suggested and no go:
Un pairing, rebooting, and re pairing did not result in a fix. I still have the same problem. I tried it on my wifes phone-hers is running 3.1.3, and no-go, it had the same problem.
The volume slider works when the music is not outputed through the headset. When through the iPhone speaker, it works as it should-the volume is able to be adjusted up and down via the slider. Videos behave as they should, any program that needs to be adjusted via the volume slider or the rocker button on the side of the phone works as it should. To expand on what I stated eariler: while using the iPod function I can set the slider all the way to the left (volume 0), press the option for output and set it to the headset. When I do that, there is a split second where you can see the slider move from the left to the middle, and then the slider disappears. It's almost as though the headset is resetting the default/baseline sound level from 0 to 50 (if we are working on a 0-100 scale). I can increase the volume using the buttons on the headset, and I can lower the volume only to half way. If I then select the option for sound output and change it back to speaker, the slider reappears, and it is all the way to the left where I originally set it. This is very frustrating. I can understand Plantronics response. but they are wrong. I can control the loudness of music via the iPod application. I guess maybe this is just a hiccup I will have to deal with. I have placed a request to Apple that they fix this. Maybe in the next upgrade they will, or at least add an option where you can adjust it in the settings.

HT1535 I use my iPod for audio books. How do I delete books from the iPod after I have listened to them?

I use my iPod for audio books. How do I delete books from the iPod after I have listened to them?

Hello ListenIt,
While the following was written for the iPhone, the process should be the same on your iPod Touch.
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
iPhone User Guide - Playlists
http://help.apple.com/iphone/7/
Cheers,
Allen

I use my IPod for Audio Books, how do I 'fast forward', I use my IPod for Audio Books, how do I 'fast forward'

I use my IPod for Audio Books, how do I 'fast forward',

While listening to an audiobook, click the Center button twice to reveal the scrubber bar. Use the scroll wheel (like you do to move up and down the menus) to fast forward or rewind through the audiobook or audiobook track.
B-rock

Air thinks there is a Midi connection when there is not. I get no playback audio out of Air.

Hello..I am trying to rehearse songs for studio session. Keep getting message that Garageband that my Air thinks there is a Midi connection when there is not. I get no playback audio. How do I tell Garageband/Air to stop looking for Midi/Logic?
It is looking for the Logic Pro used at my recording studio I go to when I transfer my cuts over to the studio's Logic Pro system from my air. I can probably wait and have my engineer figure it out but hoping somebody here will return a quick answer... Please...thanks!
I have tried everything I can think of in audio, preferences, etc.
Seems so simple to tell my Air..hey...we are no longer connected to Logic Pro at the studio!

19 Views and 0! replies...i must really have an oddball problem...my machine still thinks it needs to look for Midi because it is using LogicPro...at the music recording studio.
How do I tell it we are at home and act normally so I can hear the Air internal speakers??? Ack!

No ipod mini audio playback

audio selection on mini shows play status however no audio through earphones or itrip. audio playback fine in itunes.
NOW WHAT???

Reset your mini.
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.

Complete Show playback - audio/video

Hi all, I'm posting this in both the Logic and Mainstage forums.
I've created an entire show that will be scripted from beginning to end and want all the audio/video elements to be in sync with each other, played back from my Mac Book Pro, feeding an audio interface and a VGA output to a projector.
What is the best and most stable program/solution for running multiple audio stream playback (one stereo wav file, one mono wav file, and a live vocal channel), along with several different video clips, on a timeline?
I have numerous songs or medleys that will be played live, along with a stereo backing track, as well as a mono click track (in sync, obviously). The fourth track, and this is optional, but ideal, would be to process the lead vocal channel live through the same timeline, with effects changing at specific moments in the song.
Lastly there are video elements that would be synced up to various pieces of music.
I was hoping to accomplish this in either Logic Pro or Mainstage, but I don't see a video playback option in Mainstage, and Logic seems to allow only one Quicktime Movie at a time. I could render the entire show's video content into one long movie that runs the length of the show, but was hoping to have each song or segment as its own separate piece, so that later I could change the order of playback.
Additionally I could see using a MIDI track to send program change information to the lighting desk....but that's down the road.
If this happens inside Logic, is there a way to set up chapter markers so that I can start and stop playback, and jump to the next marker?
Thanks for your help.

inside Logic, is there a way to set up chapter markers so that I can start and stop playback, and jump to the next marker?
Yes. Markers are helpful, and they're easy to work with, especially if you learn to control them with the keyboard. Here are some relevant key commands. They are all available by default (i.e., there's no need to load a particular key command preset):
⌃K Create Marker
⌘↩ Rename Marker
⌘⌫ Delete Marker
⌃, Go to Previous Marker
⌃. Go to Next Marker
As you're scrolling through the project to create Markers, it helps to know about these commands:
, Rewind
. Forward
⇧, Fast Rewind
⇧. Fast Forward
If you have the US preset loaded, the commands are a little different, as follows:
⇧⌘' Create Marker
⌘↓ Delete Marker
⌃⌘← Go to Previous Marker
⌃⌘→ Go to Next Marker
It makes no sense that the US preset uses these more difficult keystrokes. It uses the other keystrokes (⌃K, ⌘⌫, ⌃, and ⌃.) for no other purpose. This is one of several reasons that I tend to avoid the US preset.
Anyone confused by any of those symbols can find an illustrated guide here or here.

Ipod playback audio in mono

Similar Messages

Maybe you are looking for