Ipod powered off by it's self while on the web

I was on the web with my ipod touch 4th generation,then it just powered down.

Was the battery low?

Similar Messages

My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?

My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?

This is not a problem I have only had with 7th gen. iPod. I have had this problem with the 5th gen. It goes back a few years. Nike and Apple are aware of this. Nothing has been done. It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out. It then shuts down and reboots. Your mileage is lost. So sorry. Have a nice day.
Love the other aspects of running with a nano (small and light weight). I can keep it high and dry and out of the way. Like the software. Use it almost everyday. Hate the unknown dropped runs. I have logged over 2,000 miles with these devices. Today I lost another 3 miles - probably the 30-40th time it has happened. Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
This probably occurs with my iPod once or twice a month. Went to the Apple Store - three times. The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy. The problem returned. I then upgraded. The problem returned. The third time they did a reset and it seemed to help. Then, it returned. But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . . well, lame. And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).
Oh, one other thing. The Apple Store told me to complain to Nike. Nike said their software is fine. This is like dealing with General Motors or the government - but, worse. Not my problem man. See the guy over there. Got it.
I note that no one from Apple is jumping in the chain here with a fix. So much for customer exuberance. Generally like Apple. We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . . but, maybe Apple is an idea who time has come and gone, . . . like the wind.

TS3274 I have iPad 1 and while surfing the web, checking facebook the scene blacks out then goes to the home screen. Why?

While surfing the web, checking Facebook my screen goes black and the home screen comes up. What is the problem?

The apps are crashing for some reason - maybe an app conflict, a corrupt setting, low memory ....
try a few basic things and see if they help.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Keep swiping in the task bar to get to all of the apps. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or try this .... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may help as well. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Try again.

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

How can I watch a movie while surfing the web?

I've been trying to figure out if there is any way to anchor the iTunes player so I can watch a movie while surfing the web. I've had no luck, Please tell me there is a way! =)

There are two ways I do this.
1. I set the playback in preferences to play the video in a seperate wind. Then I size the browser window so I can see both at the same time.
2. My prefered method is to play the movie on my extra monitor I use. That way I can run it full screen while working with a full screen browser.
Mort

While surfing the web, I started receiving pages regarding cleaning my mac. What's happening?

While surfing the web, I started receiving pages regarding cleaning my mac. What's happening?

Trilogygal wrote:
While surfing the web, I started receiving pages regarding cleaning my mac. What's happening?
They are known as pop-ups. To stop them download and install GlimmerBlocker.

Windows will randomly close while on the web.

Hi, I have an ASUS x501A-BSPDN22 lap top with windows 8 operating system. While on the web my window will randomly close by itself. At first I thought maybe it was the browser I was using (which was chrome at the time) but I installed firefox and the problem
would still occur. Usually it will close like an hour using it and also the flash plugin will randomly crash as well. Am I worrying for nothing or is there a possible problem?
Also is Avast agood antivirus?

Hi,
Collect the crash dump file:
Then upload it to forum, we can analyze it to see what is the culprit.
Alex Zhao
TechNet Community Support

Why do I randomly lose connection while on the web?

Why do I randomly lose connection while on the web?

Yep, that was it! I removed the auto login and it showed only a single image.
May I ask how you provided feedback on this issue? I'd like to do that as well, but I'm not sure how. Please let me know.
Karen
search feedback on start menu or taskbar search.
you can also locate feedback app at start menu -> all apps., feedback app is also pinned on live tiles by default.

What can I do when my iPad runs slow while searching the web?

What can I do when my iPad runs slow while searching the web?

Goto Setiings > Safari... Clear Cookies & Data.
Then...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..

HT201413 ipod powers off during restore

Cannot get my ipod touch to restore. It powers off during restoration. Is this normal?

Hi tckm,
A restart is normal, as in step 4 here:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
However, if the device is powering off and staying off, this article is probably the way to go:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
I hope this helps!
- Ari

Mac powering off problem (-- is it likely to be the hdd?)

Hi all,
i'm hoping to get some help with a problem I am having with my mac book pro.
Some Specs:
MacBookPro (model identifier seems to be 3,1)
Intel Core 2 Duo, 2.4GHz
2gig memory
SMC Version 1.16f8
160gig HDD - ST9160823AS (split into 2 partitions: Mac partition 123GB, Journaled HFS+, Windows partition FAT32)
OSX 10.5.6
The problem is that my mac, from time to time, just turns off in the middle of whatever I am doing (the screen goes black and the computer is off - this happens instantaneously). Then, when I go to power up, it begins the boot sequence - grey screen, spinning cog/gear - and then turns off again (black screen, no power).
On some occasions, if i try to power up enough times it will boot. On other occasions, many, many power up attempts do not work.
However, when in this state, it will still boot to the windows partition, or boot from an external drive.
Also, when i was booted into mac OS from an external drive, I ran disk repair on the Macintosh HD and got the 'Invalid Sibling Link' error.
After the invalid sibling link error, I ran fsck_hfs - r in single user mode. This found and fixed a number of errors.
Unfortunately, it powered off again. But recovered without me having to resort to fsck_hfs.
Most recently, i ran applejack (auto) in the hope that this will help resolve things.
I also tried resetting the SMC.
So, my main question is -- can I be certain the harddrive is the cause of the power offs? Or is it possible that something else is causing the power-offs and the harddrive errors are a symptom, rather than the cause of the power-offs?
Aside from running the hardware test (holding D with install disc on boot), which I have done (and nothing showed up) is there anything else I can do to try to isolate the problem?
If i can be reasonably sure it is the harddrive I will buy a replacement.
Also, not sure if this is relevant, but the poweroff only seems to occur when the laptop is running on battery.
Any help or advice would be much appreciated.
Thanks
Daniel

can I be certain the harddrive is the cause of the power offs?
No. It's probably the power supply and/or logic board, and the constant shut offs are causing directory damage to the hard drive.
Get it repaired

Can I view a video from my macbook pro on my TV using apple TV while doing something else on the laptop desktop? I.E. watch a video on the tv, while searching the web on the laptop screen?

First off, I just want to clarify that I know how to view my macbook screen, videos, music, photos etc. through the apple tv connected to my hdtv. What I'm trying to do is use it like a second monitor. For example, I'd like to watch a video from the web through the apple tv on the hdtv screen, while simultaneously able to search and use the laptop like I normally would. I know there are two desktops with Mountain Lion, but I haven't been able to figure out how to link one to the apple tv and leave the other as the macbook. I know I've done this before when I had a macbook 13" and a cable connector, there was a setting in system preferences to view one screen (tv) with a video, and then still have the macbook screen free to search for files, the web, etc.... This is different from mirroring, but I haven't located this setting on the new macbook yet.
Ideally I'd like to be able to use my hdtv as a second monitor so I can be sorting and organizing photo files on the macbook, while viewing full size high resolution images on the TV screen. I've got a ton of photographs, close to a personal library you could ask me for a type of photo and I've probably got it, but there is a decent amount of extras, doubles, and just stuff I don't need. This would really help me get organized and allow me to share my work a little bit more efficiently.
I appreciate any insights and hope I can return the favor.
Much Love
Soulprogression

I do not know how to do this with an Apple TV (I don't have one), but as far as I know Apple TV only does mirroring.
If you have an HDMI cable long enough to reach your TV from where you sit, then it's easy. The TV could be set up in Extended Desktop mode (mirroring off) as if it was simply another computer monitor, and then you could just drag windows to it. If you have the Displays icon in your menu bar, that's where the setting is, or if the icon is not there, then the setting is in the Displays system preference. But again, that's for conventionally connected monitors, not Apple TV. If you don't have an HDMI cable and wanted a long one that's affordable you can get those at monoprice.com.
The answer we are still waiting for is if anyone knows if Apple TV can be used in extended desktop (non-mirroring) mode.

Classpath error while building the web dynpro project

Hi
I have created an application in which on clicking the button on one view , next view opens and data is displayed in the tables. This data i am giving as static, and for that i have created a java file. this java file is located in the subfolder i have created in the package path i have given. While building the application, i get these two errors :
1) The project was not built due to classpath errors (incomplete or involved in cycle).
2) Missing required source folder 'BPOutageTable/BPOT'
BPOutageTable is the application name, and BPOT is the subfolder in which java file is present.
This application is similar to "The Master/Detail Viewer Application" example in the tutorials.
Can anybody please help in this?
Thanks & regards,
Anupreet

Hi,
You have give your classpath in your "lib" folder of the Dynpro application.
check your lib folder shows exact class path or not.
if you wish to add any jar files import it to your lib folder so you will not have compilation problem.
Hope it helps.If it is then close this thread.
Regards,
Guru

I am getting a error while executing the Web Dynpro Application Page.

Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
    The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_WDR_CLIENT_APPLICATION=====CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
    Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika

>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

Ipod powered off by it's self while on the web

Similar Messages

Maybe you are looking for