IPod Problems help PLZ

i have a 80gb classic and it just stopped working all of a sudden. When i turn it on all it does is go to the apple logo and turn off. When i try to connect it to my computer it doesnt reconize it. what should i do.
Please help

Hello OZ1989,
And welcome to Apple Discussions!
With the iPod hooked up, I would try putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363] to help the iPod stay powered on and mounted in Windows "My Computer" as an external drive. If you are able to get it to stay mounted, I would attempt to reformat the iPod using the tools provided by Windows, and then [Restoring|http://support.apple.com/kb/HT1339] the iPod via iTunes.
Here are instructions on how to reformat your iPod.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
Hope this helps.
B-rock

Similar Messages

HELP ME!!! PLZ I HALF SERIOUSE IPOD PROBLEMS! PLZ HELP!

OK! I GOT MY IPOD VIDEO FROM MY FRIEND AND HE HASNT CHARGED IT IN A WHILE, AND HE DIDNT HAVE A CHARGER! SO I BOUGHT ONE AND I PLUGGED IT IN AND IT DOESNT EVEN DO ANYTHING ON THE COMPUTER! I DOWNLOADED ITUNES TWICE.....AND THE IPOD I GUESS HAS A LITTLE POWER BECAUSE IT SWITCHES FROM A DARK SCREEN WITH THE BATTERY ON IT WITH THE LIGHTNING BOLT(which i dont know what it means) AND GOES TO THE SCREEN WITH THE APPLE LOGO (also a dark screen)THEN IT GOES TO A WHITE SCREEN THAT HAS A SAD FACE IN THE IPOD AND A TRIANGLE AROUND AN EXCLAMATION POINT! I CANT FIND ANY OF THESE PROBLEMS ON THE APPLE WEBSITE. I WENT TO THE SITE AT THE BOTTOM OF THE WHITE SCREEN THAT SAYS "www.apple.com/support/ipod" IVE GONE LIKE 4 TIMES AND IT SAID TO CHARGE THE IPOD FOR ABOUT 30 MINUTES OR SO. I HAVE BEEN CHARGING IT FOR LIKE 2 AND A HALF HOURS AND NOTHING! I REALLY DONT KNOW WHAT TO DO BUT I AM TO THE POINT THAT I WANNA THROW IT AT THE WALL!!!!!!!!!!!! PLZ HELP ME PLZ!

Please have a read the following, very likely your iPod can be solved by connecting it with a Mac computer
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

ITunes/iPod problem. help me plz

Is it possible to copy music files from my iPod Nano to iTunes? I lost all my music files from the computer and I have them on my iPod. I need to get them into the computer.
Thanks

If your iPod is set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7 installed hold down the Control and Alt keys (or Shift + Ctrl keys in older versions). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes 7 Keyboard Shortcuts for Windows
Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 so it requires a little adaptation, also it won't recover playlists but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
TuneJack Windows Only
iPod2PC Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. Relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days you can get loads of storage for a reasonable outlay.

Table Control Text fields problem , help plz

Hello Anand , Rich , John & All
I hav problem with Text 3 fields( type c)(either L or R aligned ) , it is not geting updated , otherwise everything else is perfectly fine(scrolling,sorting etc ....) .
Fields giving problem are
1. Status(20) type c
2. Fdat type date
3. Remark(100) type c
All numerical fields are working fine .
 My yahoo messenger-id is [email protected]
Any light on this will be awarded plz .
FLOW LOGIC
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
 WITH CONTROL TCL1
 CURSOR TCL1-CURRENT_LINE .
 MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE UPD_OK_COD.
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
 MODULE UPDATE_ITAB.
ENDLOOP.
MODULE UPDATE_TABLE.
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
 WA_ITAB LIKE ZSD_TABL_ORDBANK,
 OK_CODE LIKE SY-UCOMM,
 SAVE_OK_CODE LIKE SY-UCOMM,
 UPD_OK_CODE LIKE SY-UCOMM,
 ANSWER TYPE C,
 I LIKE SY-LOOPC ,
 J LIKE SY-LOOPC,
 V_LINES LIKE SY-LOOPC,
 LINE_COUNT LIKE SY-LOOPC,
 STS TYPE N,
 EMGRP LIKE MARA-EXTWG,
 QTY LIKE ZSD_TABL_ORDBANK-QTY,
 UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
 TOT LIKE ZSD_TABL_ORDBANK-TOT,
 INO LIKE VBAP-POSNR,
 COL TYPE CXTAB_COLUMN,
 COPIED_ONCE ,
 FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
 <FS_ITAB> LIKE LINE OF ITAB,
 <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_SORG FOR ZSD_TABL_ORDBANK-SORG
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
 S_DIV FOR ZSD_TABL_ORDBANK-DIV,
 S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
 S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
 S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
 S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
 S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
 S_SONO FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 REFRESH ITAB.
 CLEAR COPIED_ONCE.
 CALL SCREEN 0200.
 ELSE.
 MESSAGE E012(ZQOTBANK) .
 ENDIF.
*& Module SET_STATUS OUTPUT
* text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
 IF COPIED_ONCE IS INITIAL.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 DESCRIBE TABLE ITAB LINES V_LINES.
 TCL1-LINES = V_LINES.
 ENDIF.
 COPIED_ONCE = 'X'.
 REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
 ENDIF.
 LOOP AT ITAB.
 QTY = ITAB-QTY.
 UPRICE = ITAB-UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-CGL_QTY.
 UPRICE = ITAB-CGL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-CGL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-BHEL_QTY.
 UPRICE = ITAB-BHEL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-BHEL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-ALSTOM_QTY.
 UPRICE = ITAB-ALSTOM_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-ALSTOM_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-SIEMENS_QTY.
 UPRICE = ITAB-SIEMENS_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-SIEMENS_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-TELK_QTY.
 UPRICE = ITAB-TELK_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TELK_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-OTH_QTY.
 UPRICE = ITAB-OTH_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-OTH_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 MODIFY ITAB.
 ENDLOOP.
ENDMODULE. " SET_STATUS OUTPUT
*& Module SET_LINE_COUNT INPUT
* text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE. " SET_LINE_COUNT INPUT
*& Module UPD_OK_CODE INPUT
* text
MODULE UPD_OK_COD INPUT.
IF OK_CODE = 'SAVE'.
 UPD_OK_CODE = OK_CODE.
* CLEAR OK_CODE.
ENDIF.
ENDMODULE. " UPD_OK_CODE INPUT
*& Module EXIT_COMAND INPUT
* text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
 WHEN 'BACK'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Go BacK ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
 WHEN '%EX'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Exit ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMAND INPUT
*& Module UPDATE_MOD INPUT
* text
MODULE UPDATE_ITAB INPUT.
 MODIFY TABLE ITAB FROM ITAB.
ENDMODULE. " UPDATE_MOD INPUT
*& Module SCROLL INPUT
* text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
 TCL1-TOP_LINE = 1.
WHEN 'P-'.
 TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'P+'.
 I = TCL1-TOP_LINE + LINE_COUNT.
 J = TCL1-LINES - LINE_COUNT + 1.
 IF J LE 0.
 J = 1.
 ENDIF.
 IF I LE J.
 TCL1-TOP_LINE = I.
 ELSE.
 TCL1-TOP_LINE = J.
 ENDIF.
WHEN 'P++'.
 TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'SORTUP'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB ASCENDING BY (FLDNAME).
 ENDIF.
WHEN 'SORTDN'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB DESCENDING BY (FLDNAME).
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND INPUT
*& Module TABL_UPD INPUT
* text
MODULE UPDATE_TABLE INPUT.
 CASE UPD_OK_CODE.
 WHEN 'SAVE'.
 UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
 IF SY-SUBRC EQ 0.
 MESSAGE I002(ZQOTBANK) .
 CLEAR UPD_OK_CODE.
 ELSE.
 MESSAGE E003(ZQOTBANK) .
 ENDIF.
 ENDCASE.
ENDMODULE. " TABL_UPD INPUT
Thnx
moni
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman

Hi Moni,
The problem as I had replied in your earlier post is with the MODIFY statement.
MODIFY TABLE ITAB FROM ITAB. This statement will do the modifications based on the table key. When you have character fields as editable, then some problems are to be anticipated. In such a scenario, you must update the internal table based on the index, rather than based on key.
So consider using
MODIFY ITAB FROM ITAB INDEX TCL-CURRENT_LINE.
Where TCL is the name of the Table Control. Also observe the difference in syntax here, don't use the TABLE keyword for the MODIFY statement.
Please try it out and let me know.
Regards,
Anand Mandalika.

Nokia 5220 WHITE SCREEN PROBLEM *Help plz*

hello guys ... my phone's (5220) screen has gone White ... !! i have absolutely no idea what the problem is ! i took out the battery and put it back again .. but when i turn it on ..after the nokia logo the screen goes white again !! i cant do anything except for looking at the white screen...! the phone doesnt even turn off until you take out the battery !
I tried to connect it to my PC (via data cable) but the phone does not get connected with the PC suite !! PLZ HELP ME !!

Jimmyireland is right - anything that you could do yourself requires the phone to at least boot up properly, at the moment your phone is like PC with no Windows involved, it can't find its OS to start.
The 5220 is a series 40 phone, there is facility for a forced reboot, it needs its software to be reflashed which is why you need the Nokia service point.

Annoying podcast problem help plz

hi guys,
first if this is in the wrong place, i apologise, as you can see a new user.
anyway, heres my problem,
i just got hold of an ipod mini, and i use my itunes extensively for podcast listening,and i have a problem regarding when it comes to syncing them with my ipod.
basically i would like my ipod to put any podcast that is listed as new in itunes on my ipod when i connect it.
and yes it does that fine.
but what problem i have is, when i come to syncing again, it will get the new ones ok, but it will remove all the ones previously put on there, and its annoying, as there are some i have not listened to yet.
is there a setting were i can get my ipod/itunes to put all new podcasts on automatically, but leave them on until i decide to remove them.
i have tried all the settings in the ipod/podcast settings, but none do that.
so any help guys appreciated.
is there a way to get my new podcasts on my ipod, but leave the others on.(and then what would be the easiest way to remove them when i do want them off??)

You should try to restore the iPhone using iTunes make sure you back up, see if it helps.
iPhones won't show as removable device if you are referring to be able to copy/transfer files similar to a usb flash drive. It is restricted based on Apple's specification altho it should appear as "Digital Camera Device" having access to your captured photo's or "camera roll" you should unlock your iPhone first before connecting to PC or Mac if you do have a password.
As of saving issues, try to restore the firmware by itunes or resetting through iPhone settings as reset or restore.
It should fix and work as normal, if it doesnt you can always go back from where you purchased it but it will. Goodluck.

Annoying iphone problems, help plz?

well, I'm having two annoying problems with my iphone, the first is that when I record a video or a photo, it does not save and the second is that it does not appear as a removable drive on the pc, SOMEBODY HELP ME PLZ :/

You should try to restore the iPhone using iTunes make sure you back up, see if it helps.
iPhones won't show as removable device if you are referring to be able to copy/transfer files similar to a usb flash drive. It is restricted based on Apple's specification altho it should appear as "Digital Camera Device" having access to your captured photo's or "camera roll" you should unlock your iPhone first before connecting to PC or Mac if you do have a password.
As of saving issues, try to restore the firmware by itunes or resetting through iPhone settings as reset or restore.
It should fix and work as normal, if it doesnt you can always go back from where you purchased it but it will. Goodluck.

Iphone and Ipod problem help me!!

I just bought a iPhone and I want to give my iPod to my boyfriend but I only have one computer there for I only have one way to get to my iTunes,me and my boyfriend have different tastes in music and he doesn't want my music and vise-versa I've tired to change our apple IDs but I cant seem to figure it out :-( Please someone help me I want to try and not go to the apple store
Thank you!!

The iPhone and the iPod sync characteristics are configured separately. The iTunes application keeps track by S/N. Apple ID doesn't matter. (I currently have two IDs and the only problem is very minor - log out/in to update apps obtained with the "wrong" ID.)

TIRED OF IPOD PROBLEMS - HELP

Ok, im sick of having problems with my half a grand f-ing music machine...
I took me days to figure out how to rip dvds with handbrake and its still very very inconsistant, works whenever it wants, now when i copy those mp4 files to iTunes, they work whenever the **** they want and now i get error messages constantly when copying movies/updating my ipod.
"Attemping to copy to disk "Zacks iPod" failed. Disk could not be read from or written to."
What the crap is this about, and i noticed that it sais DISK now instead of IPOD, I have tried to turn the disk enable on and off with no change, can anybody help before i throw this thing in bottomless pit of useless techlogical junk.
Mac fan for now, Zack

I understand your frustration. I hope that you can solve yours as easily as I have solved mine. Basically all by looking on this forum for help.
I received my 60 gb yesterday and while updating it today, the do not disconnect would not go away, i reset the ipod, and that fixed that. So then my itunes would not recognize my ipod, so I turned everything off and unhooked the ipod and reset again, then let the computer boot back up, then hooked the Ipod up and all is well. I think the problem was my computer and not the Ipod. We will see.
My point is (after rambling on) take it easy, get up and walk away for a moment if you have to. Try to do what they suggest on here, and if all that fails, give ol Apple a call, I am sure they will be more than happy to help you out! =P

WRH54G linksys setup problem help plz

i just bought the WRH54G linksys wireless-G home router. I put the cd rom in and i followed every step and i have everything in the right place but when it is at step 9 when u have to choose between DHCP, PPPoE, or Static Ip i dont know which one to choose so i go with DHCP then step 10 after i put in the passwords and click next and it is checking internet connection it says the router is not able to connect to the internet. try turning cable/dsl modem off and back on again. do you want to try again?. that is where i get stuck and i have tried to turn it off and back on again and i doesnt work. can anyone help me out?

I HAVE A DSL .. ROUTER PROBLEM
STAYS IN STEP 9 AS WELL ..
checking internet connection it says the router is not able to connect to the internet. try turning cable/dsl modem off and back on again. do you want to try again?
after some research am going to try to put MY MODEM in brigde Mode. maybe that'll fix the problem... Since it apears the linksys WRH54G is trying to connect to the internet DIRECTLY... i dont knoe .... first time newbe , i have a high level of computer experties.. but am having pro with dis NAW 25$ discounted outer.lol
I have DSL from verizon... in there instusction on how to.. the first thing is to put the MODEM that they issued A WESTELL into brigde mode .. and setup..
if anione gat this thing working after u gat this CANT CONECT TO INTERNET
the router is not able to connect to the internet. try turning cable/dsl modem off and back on again. do you want to try again?
please e-mail me with anifinding..
.thanks in advance

Displaying problem Help Plz !!!

Hi all
For some reason i cant seem to get any applets to run on my computer, they just wont show up, if any one could help, sorry now if i am in the wrong room for this
Thanks

Go tp this Sun website http://java.com and click on Verify Installation. If it does not verify that Java is installed, try clicking on the install arrow, and start an install. If you have any problems, review the help pages there.

Frozen ipod..HELP PLZ

i had my ipod nano for about 3 dayz now..and itz been frozen almost all day..nothing moves and the backlight has been on the whole time. i tried everything that this website said. i tried to reset it and everything nd itz making me pretty mad. so can someone please help me with other advice then the site gives you because i already tried it, and i even had it sit on the charger most of the time but it is still frozen

if you've tried this Resetting iPod if it appears frozen or doesn't respond and this Restoring iPod to factory settings then the next thing is the 5 R's here http://www.apple.com/support/
If that lot doesn't fix it then your nano should still be under warranty. Send it back and get a new one.
Seasons Greetings
Colin R.

Syncing problem help plz....

i keep getting the "disc cannot be read from or written to" message and its really annoying i cant sync any videos

I did it
1st got my ipod reset completely (took 2 hrs)
Then Uninstalled previous version of itunes, installed new one
After dat updated my touch
Now its working

ITunes not recognizing my ipod need help plz

when i hook my ipod into my computer, the computer recognizes that my ipod is there. it makes the ding sound that windows makes when u add or remove hardware and the ipod shows up in my computer. When i go to update it with itunes 7 though, itunes does not seem to know that my ipod is there. it shows no signs of recognizing my ipod. what can i do to fix this?

Sounds like windows confusing the ipod as a network drive try the steps here http://docs.info.apple.com/article.html?artnum=93499

Dv6 pavilion hardware problem HELP PLZ

My hard drive makes a clicking noise. I know its wrecked but i want to know where i can get a new hardrive that fits my laptop. Please help

You will need to call AppleCare and talk to a Customer Service representative. This is a user-to-user forum, and we cannot help you with this issue.

IPod Problems help PLZ

Similar Messages

Maybe you are looking for