IPod recognised / not recognised!

Hello! I've got a new iPod and installed all the software which came with it (MusicMatch, iPod Manager, iPod Updater etc), and there seems to be a problem with my PC recognising the iPod. I can see it in My Computer as:
IPOD(D:) Removable Disk
..but the ipod is not listed in iPod Manager for selection and if I do File, Send to Portable Device from Music Match (as suggested in Troubleshooting section) it says Devices Connected = 0 (zero).
Any advice?
(I downloaded the latest version of iPod Updater (2006-01-10) and the iPod is recognised in there. I've sucessfully (as far as I can tell!) 'updated' and restored from here, but still its as if the iPod is not fully connected to the PC.
I've rebooted, removed all (iPod related-)software and reinstalled all software and still this problem exists.
Help!
Packard Bell   Windows XP  

I'm also in the exact same boat... brand new iPod Shuffle, all the latest software and updates, but my Mac can't find it and iTune preferences show "no iPod connected" -- however, it connects just fine to an old PC running Windows 2000. It was actually used there first.... is it just restricted to that machine now???
Thanks in advance to anyone that answers
new ipod shuffle bought - latest software installed
6.05 -using Mac OSX 10.3.9
usb 1.0 . shuffle charging correctly & showing green
light but preferences in iTunes
tells me " no iPod connected"
ANYBODY able to help - have gone thru all discussion
ideas???

Similar Messages

  • IPod Touch not recognised on Windows 8 and will not appear as connected in iTunes.

    Usually when I plug my iPod Touch (4th Gen) into my laptop (Windows 8) it appears automatically on iTunes for me to sync. However, when I tried to do this today, iTunes did not recognise that a device was connected and this was confirmed after I did a diagnostic test. Windows recognises that an iPod has been plugged in, however where it usually says "Alicia's iPod Touch", it just appears as "Apple iPod" and when I click on it, I cannot access any photos/videos that I have on my iPod. Any help would be very much appreciated if anybody know how I can fix this. Thank you.

    Hello Ali_95
    Check out the article below for troubleshooting issues with your iPod touch not showing up in iTunes. It may be an issue with security software or the Apple Mobile Device driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • IPod touch not recognised by itunes. have tried fix suggested in FAQs

    Hi Guys,
    I have a 32gb iPod touch, which recently had been running a bit slowly. As a solution to this i updated with the newest sowftware, and cleared all my apps. Still slow, so i decided to do a system reset from the settings function. This was fine but since then my ipod has not switched on, it merely switches on to the apple logo, and goes back off again. When i hook it to a computer, itunes does not recognise that it is connected and i cant do a system restore. I have tried the 'hold home and connect to cable' trick but with no success.Is this a problem that you have heard of before?ie is there a quick solution, or will it need some parts/software updated by apple?

    Help please, from iPod Touch experts?
    (Sorry Darraghjoneill, not an answer but extra questions.)
    I've an 8Gb iPod Touch which was working fine until around iTunes9. Now it is not recognised in iTunes. I've been through all of the support docs and suggestions covering deinstalling and reinstalling iTunes (including iTunes8), AMDS, USB Drivers, etc. I've an iPod Nano which works fine with the same USB cable in the same USB slot and a 10Gb Classic that works fine through Firewire.
    When connecting the iPod Touch it shows the "Connect to iTunes" graphic and does manage to start iTunes but then I get the "iTunes could not ID this iPhone properly, disconnect and reconnect". I do that and then get the "Unknown Error 0xE8000065" problem with the added complication that, whenver this appears it messes up Firefox so no new pages can be loaded and the only fix is to Reboot my whole PC. I also get this Firefox problem when stopping/starting/restarting AMDS.
    Stupidly, I thought resetting the iPod Touch to factory defaults might have helped but it didn't so now I have a very shiny brick.
    Any practical suggestions?
    LeonSJB

  • Ipod touch not recognised by win 7

    Hi,
    My ipod touch is not recognised on a win 7 computer. It comes up as camera wizard but that is as far as it gets. Using Itunes 10.6.1.7. Have tried uninstalling /reinstalling itunes. The Ipod synchs OK on a win xp computer. Tried all of the possibilities in the apple help page " Ipod touch not able to synch with itunes x64 in windows 7" http://www.apple.com/support/ipodtouch/assistant/itunes/#section_7

    Have you tried evetthing here:
    iOS: Device not recognized in iTunes for Windows
    Did you remove and reinstall all the Apple software usings:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • TS1363 My 5th Gen ipod is not recognised now on my itunes when i plug it in via usb, what should i do having tried all the troubleshooting advice? It works ok on another laptop.

    Tried TS1 363 still not recognised.

    Your USB ports do not supply enough power to charge the iPad. That is normal and expected behavior. The iPod does not require nearly the same amount of power to recharge so it will work from your computer. Use the power adapter and plug into a wall socket to charge the iPad.
    Are you sure that iTunes doesn't see the iPad? If you are running iTunes 11, from the menu at the top go to View>Show Sidebar. After the sidebar is enabled - do you see the iPad under the Devices heading in the sidebar?

  • IPOD TOUCH NOT RECOGNISED IN ITUNES OR MY COMPUTER

    help ! my ipod touch isnt recognised in my computer ,nor in my itunes diagnostic program it says no ipod detcted .on my ipod touch 2nd gen screen it has the itunes symbol and a usb lead symbol.when itunes comes on it says itunes has detected an ipod in recovery mode ,you must restore before you can continue .i have tried restoring many times but itis stuck in a loop !! ive followed the apple support info about administrative tools and trying to reasign a new path /drive but when i get to the part where it says right click on the ipod symbol there isnt a symbol there !! help im going out of my mind !!

    Hi,
    Have you seen these support articles...
    iPhone, iPad, or iPod touch not appearing in iTunes
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • IPod Touch not being recognised on newly-installed OSX Leopard (10.5.4)

    I have an iPod Touch (software version 2.0.2) which is not being recognised in OSX Leopard (version 10.5.4) which I just loaded onto the Powerbook G4. It was recognised under OSX 10.4, although the iPod Touch didn't launch iTunes when it was connected. It was only recognised after iTunes was launched.
    I have read some previous posts about iPod Touch not being recognised. One of the recommendations is to reinstall the entire iTunes package. It this must be done to sort the problem, will all of the music in iTunes be lost?
    Note my daughter's iPod, when connected, launches iTunes and is recognised.
    Help, please.

    Hi,
    Reinstalling iTunes *will not* erase your music library.
    As a matter of course I do, and in fact Apple recommend that you back up your music library, there is an option to do this under "File" in iTunes. It is really quite sensible to have your purchased and other music files saved elsewhere as well as on your main hard drive, it can save a lot of time and hassle.
    Good luck,
    Dud.
    Message was edited by: Duddo - typo

  • Ipod nano not being recognised by computer, 5th gen

    my ipod is not beng recognised by my laptop as my ipod will not turn on and is charged and is also not being recgonised by any other devices such as docking stations. It will not reset for me and have tried numerous links online, please help???!!!!

    If the iPod isn't powering on and you are positive that you are using a working USB cable and plugging the iPod into a working USB port or wall adapter, it could be a sign of some hardware issue with the iPod such as a dead battery or damaged/faulty logic board.
    B-rock

  • My iPod is not recognised by itunes or windows 7

    Appreciate any wisdom concerning iPod Classic not being recognised by my PC. I run windows 7 and iPod does not register in My Computer or iTunes.  Thanks for any help in advance.

    Does it charge?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My IPOD is not being recognised by my Alpine CDE113BT Headunit

    My IPOD is not being recognised by my Alpine CDE 113BT Headunit. I have reset both my IPOD & Headunit & still not connection. I have tried one other Ipod & I Phone with no problems. An Error Message - 01 came on the display the last time it was connected. Any ideas.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • Ipod Touch not being recognised/unknown device

    Ipod Touch not being recognised - help!?
    It says it's a code 43 - Unknown device/device not recognised. Doesn't sound good.
    Tried all of the things the itunes website suggested such as of course turning it off and on again, restarting services, reinstalling itunes. I know from experience that when you take it in to the shop they want to charge you almost as much as you bought it for to fix a minor problem. Thanks

    Hi,
    Reinstalling iTunes *will not* erase your music library.
    As a matter of course I do, and in fact Apple recommend that you back up your music library, there is an option to do this under "File" in iTunes. It is really quite sensible to have your purchased and other music files saved elsewhere as well as on your main hard drive, it can save a lot of time and hassle.
    Good luck,
    Dud.
    Message was edited by: Duddo - typo

  • After updating itunes on my laptop, my ipod is not recognised

    after updating itunes on my laptop, my ipod is not recognised by windows or itunes

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • My ipod is not recognised in itunes when i plug it into the computer, why?

    my ipod is not being recognised in itunes when plugged into the computer, i have uninstalled itunes and reinstalled itunes several times and it still isnt working, does anyone have any ideas what is the matter?

    megz17, myself (munwaaaa) and a couple other have the solution for this on this site.  Not sure how to surf to it exactly as i just added replies to the origonal post, but keep searching, if i find the link it will kick it to you.

  • IPod is not recognised in iTunes

    Hi
    This problem has been driving me up the wall! Basically my iPod is not being recognised in iTunes (doesn't appear in the source list) or the Updater. It is recognised in Windows Explorer as it comes up in my "safely remove hardware" section. I have followed the Apple website advice http://docs.info.apple.com/article.html?artnum=93716.
    I reinstalled COM interface, no luck. Went onto removing iTunes and reinstalled. No joy. I thought if I could completely restore my iPod it may shed some light but of course the Updater always says "Can't mount iPod".
    I think I may have registered my iPod early this year, starting with a PC connection. Then updated it on a Mac. On the iPod menu>Setting>About>Format it still says Windows.
    Hope the information helps with any solutions
    Thanks
    Steve

    Jeff, and anyone else reading this. I did try assigning the iPod to another drive letter and it worked (to some extent). I'll run through what happened, including probably the one thing that I did completely wrong.
    Before seeing this reply I thought I would completely wipe my iPod just by deleting the files through windows explorer (very silly, was just desperate). Came to deleting some of the music files and it said "...is not empty" so couldn't delete anymore.
    Read the reply above and changed the drive letter, immediately informed my iPod did not have the latest update. Downloaded it and plugged it into my AC to charge (came up with that symbol). This is where it goes hazy, can't remember the complete order of events. Anyway, still no recognition from iTunes after a restart of the PC and iPod drive has reverted back to C. Changed back to N, goes through the process of Updater. I completely restore it and I think it came up with a command "Formatting failure. Disk write error". So I disconnect the iPod, comes up with the AC image and plug it in. GIves me choice of language, completely wiped the iPod without seemingly completing the restore on the computer.
    Becomes hazy again. Tried to restore again (didn’t give the option of Updater as I have the latest on there now) and starts going through the process. It has now come up with a couple of messages while trying to restore “Formatting failure. Disk write error” and “Firmware update failure. Disk write error”. Also got a failure message on the toolbar “iTunes:iTunes.exe – Corrupt file. The file or directory \iPod_control is corrupt and unreadable – Please run the Chkdisk utility”.
    By this time I had given up. Did the change of directory my brother’s iPod (always formatted for Windows) and his worked straight away. Out of curiosity I plugged mine in again, came up with the message error in the toolbar above but my iPod was suddenly recognised in iTunes. It reorganised the downloads, started uploading. Went to bed, left it on track 1690 loaded out of whatever it was. Computer was still on track 1690 in the morning, locked the computer. Restarted, checked my iPod, only 8 tracks had been loaded. Tried to restore, same messages. Now my iPod won’t turn on, accept to show the Apple logo and then the symbol with the folder and exclamation mark with the iPod support web address below.
    Any ideas on what I should do? I can take it into an Apple store, but not for a while.
    Sorry this is long but wanted to get as much detail down.
    Thanks
    Steve

  • HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My iPod is not recognised in iTunes BUT I have tried to restore it!!

    Okay, at home and my iPod went dead so I plugged it into mates laptop at home to charge (didn't think this would hurt it cos I didn't touch his keyboard or press anything, just charged it!) Came to work tried to update iPod with new tunes and it said it did not recognise the iPod (the name I gave my iPod did not come up either) and told me to restore it. Clicked on restore - told me it would go back to factory settings and I would lose everything). I went ahead and restored it. No it just keeps telling me to restore it. My iPod just has the do not disconnect icon coming up and is empty - none of my songs or pictures are updating on my iPod. Please please can someone tell me how I make my iTunes recognise my iPod again and put all my songs back on!!! PLEASE!! I am lost without my iPod!!!! Thanks Lucie....xx
    iPod Video 30GB   Windows XP  

    I had the same thing happen. I hooked my iPod up to my notebook, which has iTunes and is set up for my daughter's iPod 30GB Video. I have the old clickwheel 20 GB. Mine is set up to use my desktop computer. I thought it would not harm it to just charge it on my notebook as long as the notebood was turned off. Then when connecting to desktop, I got the do not disconnect sign..I ended up rebooting the computer and ended up with the sad iPod face. I have reset so many times and cannot restore iPod. I have charged it numerous times with the wall outlet. When connected to the desktop, it just shows the Apple icon. I have reinstalled iTunes. Please let me know if you find an answer to this problem. Best of luck to us both.
    Anyone who can help us please do so.
    Thank you!
      Windows XP  

Maybe you are looking for

  • Change date on select statement

    Hi all, I've field CLOSEDATA datatype DATA format 'dd/mm/yyyy hh:mm' I extract CLOSEDATA with this query SELECT CLOSEDATA FROM JAVADEV WHERE CLOSEMONTH='2010'but don't want the extracted time hh:mm of CLOSEDATA... I want to change it into 02:00 So th

  • Are there any Components to view movies on G5 Macs? Or another way to view?

    I can't seem to view anything I download. I get a message saying I need additional components. I've tried installing XviD & DivX, but I get messages saying these require Intel Macs; my iMac is a G5 running 10.4.11 and QuickTime 7.6.4. Does anyone kno

  • JDBC driver-urgent!

    am trying to connect using JDBC using the foll line: Class.forName("oracle.jdbc.driver.OracleDriver"); am getting runtime excep: classnot found I ve added the directoties of foll files to classpath classes.jar,classes111.zip files. is there anything

  • Automatic Warehouse task

    In an Inbound delivery if we have same product and batch in multiple line items,  Automatic Warehouse Tasks are getting created for rest of the HU after  creating WT for one HU Inbound Process--> Receive HU via ASN. Then Select a HU and perform Unloa

  • Why won't my plug-in's work after installing Firefox 4?

    After installing Firefox 4 I have had problems. The Aniweather doesn't work and the other plug in don't seem to be working either. They all say they are enabled. I have reinstalled Firefox and it still doesn't work. I would go back to the old Firefox