IPod records video with very low volume?

I have a 32 GB iPod touch and whenever I try to record a video with it the volume is so low. I have to run it through a video editor twice in order to hear the sound okay. Is there any way to fix this?

It's an iPod touch 4g if that helps any

Similar Messages

  • My ipod records video with very, VERY bad sound

    Everything else works just fine. I've tried reseting the ipod, but nothing happened.
    The exact problem is that I can record the video, but, for example, when I talk, no matter how loud I do it, I can't hear myself on the recording. The sound is "weak".It sounds as if I were talking from a very long distance ....
    PLEASE HELP ME, I really love this ipod, it's my favorite nano an everything else work perfectly, thanks .

    It's an iPod touch 4g if that helps any

  • Songs with very low volume

    Hi!!
    (Excuse me for my bad english language.)
    The songs are being exported with very low volume. I mixed all tracks to best use. I tried all the quality options, including no compression. I also tried with and without Normalize. What else can I try? What could be happening? Tks!

    Hi stosfot,
    Thanks for using Apple Support Communities.  This article has some information on adjusting the master volume of a track that may help:
    GarageBand '11: Adjust the project’s master volume
    http://support.apple.com/kb/PH1997
    Cheers,
    - Ari

  • Very Low Volume Form Videos Taken

    Hi
    I am having problems in my iphone 4 whenever i make a video and then play it the volume of the video is very low it want the same before but all of a sudden this problem occured cos i thought that there may be a problem in the mic but when i make a call the other person can hear me clearly and i have a voice recording n changing apps installed in which the sound playback is good i donno whts the problem with it please help
    regards veeru

    Hi Allan
    Thanks for your reply
    I have tried holding the phone by ways so I don't cover any openings which has the mic
    I even tried by removing the cover
    But still the same
    I went to the apple store yesterday n asked they said just restore the phone and if still the problem occurs get it back to us

  • My Ipod, keeps on saying very low battery then restarting. then turning bright with the apple logo and going back to very low battery again.

    My Ipod, keeps on saying very low battery then restarting.Then turning bright with the apple logo and going back to very low battery again. HELP PLEASE.. I have plugged it in for 2 hours now.

    If you are trying to charge from your computer, try a different USB port, or try charging from a wall outlet.
    And try here.   Troubleshooting iPhone hardware
    Powering Apple and third party peripherals through USB

  • Microphone Very Low Volume

    Hi
    I have been using my new MXL USB 007 stereo microphone on Windows 7 Professional with clear quality audio for a while now.
    On Monday 26 November 2012, I reformatted my PC laptop hard disk and installed Windows 8 Pro.
    Now, the quality of the recorded audio is heavily subdued without the clear clarity I used to get. In other words, I am getting very low volume, even though the recording level is on 85 (I tried with 90 as well. 100 has way too much distortion).
    As a test, I connected the same microphone to another one of my machines that still has Windows 7 Professional, and the audio result was excellent. So, it’s not the actual microphone.
    I have checked the Windows 8 sound settings. It says the device is working properly. There is only the Levels to adjust and under the Advanced tab, I have 2 channel, 16 bit, 48 kHz, DVD quality - same as before on Windows 7.
    Is there some setting or something else I should do on Windows 8 to get decent sound again?
    Any ideas? Please help ....
    Thank you.

    I have reinstalled Windows 8 Pro twice, both times formatting the disk.
    The first time, I connected the microphone immediately after the OS install.
    The second time, I connected the microphone only after all Windows Updates and device drivers were applied.
    In both cases, the problem of very low input volume remains.
    I searched online, and found somebody else has the same problem with a different vendors microphone.
    I quote from:
    http://www.tomshardware.com/forum/1251-73-microphone-input
    "I use Cakewalk for sound processing and have discovered that my Samson CO1U
    microphone has almost no input strength under Windows 8. I have tweaked about everything I can imagine. Any ideas? "
    On my machine, I looked at Device Manager and found:
    From the above screenshot, it seems like the USBAUDIO.sys file is one of several being used.
    Unless I am mistaken, all of the sound device driver files for the USB Audio CODEC are Microsoft files.
    If so, can we please get a Windows Update on this issue?
    Awaiting in anticipation ....

  • Hi. I Have a Pavilion dv9000 which has always had very low volume - really needs to be increased?

    Hi. I Have a Pavilion dv9000 with Vista Ultimate 64.  It has always had very low volume and I find I generally have to have the volume up into the 70's 80's as well as the onscreen media player slider almost full -  which then gets all distorted - and then have to turn it down again when not using the player as the computer error beeps come screaming out., Ive checked the settings on speakers to make sure all are the same & balanced and also have updated any codecs as needed. Is there a sound lever setting elsewhere?
    cheers

    Thanks for the reply and peeling my post off Mike, sorry I didn't start my own initially.
    Well @ 1333Mhz I was using the rated timings 9-9-9-24 (as per Corsair) but it wasn't very stable as I said.
    I have since changed the FSB/RAM ratio to get 1066Mhz and it seemed much happier. (@1.5v) It would be nice to run the RAM at it's rated setting but my OC skills aren't that extensive. I imagine it would need alot of tweeking? Or could I have just relaxed the timings a bit?
    Would removing the Switch Cards make any difference?
    Thanks in advance.

  • Very low volume in the speaker

    Dears
    i've notice of the very low volume level from the built in speaker of the earliest Mac Pro ( i've one ) compared to the previous one (2008...i've one). Is this normal ?
    Thanks in advance.

    I can tell you right now, that's a complete waste of time! They're just gonna tell you it's "in spec."
    It's a crumby speaker... deal with it. If you really care that much about the volume of the audio, you should just get a good pair of external speakers!

  • Sound is very low volume

    I've done a search but can't seem to find any info re the sound volume on my bw G3. The sound out of both the front, built in speaker, and through the headphones, is very low volume output, almost but not quite muted. I've searched and adjusted the controls but to no avail. Could this be a hardware problem or software? There 'is' some movement when I adjust the volume slider but it takes the level from what would normally be 2 of 10 down to nothing. That is, there is no way for me to get the sound to levels that within normal limits. It's like the output is being blocked somehow but is still leaking through enough for me to make out the particular sound (song in this case) that I'm listening to.
    Any help would be appreciated. It might not be worth puttiing any money into and I'd like to at least try.
    Michael

    Michael,
    Sounds like you are ahead of the game on testing with headphones. External speakers would not make much of a difference without an amplifier.
    "(is there another place to check sound output?)" If you had an AV output you could test sound out of that card. Finding a card might be cheaper than any repair bill and give you a definative answer on if their is a system software level problem.
    Sound reading for your edification:
    http://docs.info.apple.com/article.html?artnum=58764
    http://docs.info.apple.com/article.html?artnum=31314
    http://docs.info.apple.com/article.html?artnum=24718
    http://www.info.apple.com/kbnum/n24503
    These articles do not all address your model but give some perspective on software and hardware issues, including how just reseting the PRAM on some machines is the official Apple response.
    If you go to the advanced search link at the top of the page and make a query for "no sound" you should get a response similar to this link:
    Link
    Be sure and include pre 1997 hardware.
    Good luck.
    Ji˜m

  • My call having very low volume to the caller

    my call having very low volume to the lisner or caller . how to increase form my iphone.

    Hey there pawan922,
    It sounds like you are being told that your voice is not clear but they sound fine to you. I would use the troubleshooting in the following article to help resolve the issue here, named:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Follow these steps, testing after each.
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
    Dirt or debris
    A screen protector or case
    When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
    Turn the iPhone off and then on.
    Update to the latest version of iOS.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    If the issue persists and you need to make a call, try using headphones with an integrated microphone.
    iPhone 4, iPhone 4s:
    Top microphone
    Bottom microphone
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HP Pavilion g6-1d98dx has very low volume.

    Hi there, 
    I have an 
    HP Pavilion g6-1d98dx with W7 Ultimate that suddenly has very low volume. I have tried rolling back the drivers, uninstalling them and the device itself.
    I also tried that loudness equalization option, but it only makes it worse. It used to sound very good, but now it's horrible. Now I have to wear a headset just to listen to music! Any help would be greatly appreciated. Thanks! 
    This question was solved.
    View Solution.

    Hi @Kindakool 
    I understand that you are having trouble with the sound from your built in speakers. I am happy to help you with this.
    You can start with the following page, even though you are getting some sound.
    No Sound from the Speakers (Windows 7)
    Or you can check the connections on your internal speakers for that you will need:
    HP Pavilion G6 Notebook PC - Maintenance and Service Guide
    From Microsoft's support website:
    Automatically diagnose and fix Windows audio playback problems
    If those do not work it is possible that there is a physical problem with the speakers themselves. At that point I would call in to our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • New HP2000 laptop plays very very low volume at the highest setting, please help me fix this!

    new hp2000 laptop
    very low volume
    gone into all the settings i can see and cannot find a way to rectify this problem
    help me hear my hulu / netflix / amazon prime / youtube  
    THANKS!

    Hi, sorry to hear that you are having issues with your new notebook audio.  I will be happy to help with the issue but first I will need to know the exact model number of the computer as well as the operating system you are using. To find the model number, please look on the bottom of the computer. You will see a white sticker. Here is where you will find the model number. If by chance you do not see the model number, please remove the battery and you will find it.  I look forward to hearing from you.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Very low volume on headphone jack on MBP 13" but no red light

    Hi I am looking for solution for my problem where in I am currently getting very low volume on headphone jack. There was no problem before, everything used to work perfectly fine.
    I couldn't find comprehensive solution for this. Could anyone please point me to the correct thread if solution is already available.
    my details:
    MBP 13" Snow leopard, 10.6.5 - First Gen. Unibody MAC.
    problem: Very low volume when headphone is connected.
    Things: I have tried:
    1. Headphone is fine. Works correctly on windows PC and on my iphone.
    2. Tried system pref. volume is max.
    3. Upon connecting headphone to MBP it is detected as headphone.
    4. Tried Audio MIDI setup, settings seem to be correct 44.1KHz 2ch-16 bit
    5. There is NO red light from headphone jack.
    6 Tried poking toothpicks in to audio out but didn't help.
    7 Tried creating new temp. admin user account but headphone low volume remains.
    8. Tried safe boot - no joy.
    9 Safe boot was followed by normal boot-> Ran Disk Util tried repair permission. No luck.
    10. Also followed steps to clear PR RAM etc. - problem remains.
    11. Heard about logic board replacement but don't want to go by that route.
    Can anyone point me to correct thread or provide the solution..
    help is much appreciated.
    Thanks...

    I have the exact same problem. i have  a macbook pro 13in (mid 2009) with extremely low volume coming from headphone jack. i brought the computer into my local apple store today and they diagnosed my problem as being the result of a faulty logic board. my laptop is out of warranty so they have to send it to the apple repair depot for 3-5 days. the charge is a flat $280 (tax not included). the solution seems extreme though and i hope i don't get any "kernel panicking" with a new board. i will update... also there is no accidental damge to my laptop whatsoever. the problem arrose 2-3wks ago

  • Very Low Volume Output - Audigy 2

    Hi,
    All of a sudden my Audigy 2 ZS card has very low volume. Tried different speakers, tried uninstall/reinstall, tried clean boot of XP, no luck. Also, there is faint crackling when I turn volume up but I believe it's only because speakers are fully cranked and there is hardly any sound coming out.
    Any help would be appreciated. Thanks

    I didn't have any place to test the card but I did replace it with another one. Unfortunately, the other card gives the same result - very low volume. I suppose this means there is a problem with the motherboard. Do you agree? Is there any other test I could do that might pinpoint the problem area?
    Yes, I received a "reply" from Creative. It was a form email that said they received my message and would respond (usually) within 24 hours. That is the only message I received from them.

  • How to watch my ipod touch videos with apple tv

    I am just trying to watch my ipod touch videos with apple tv.. how I can do that?

    this is an user forum apple dont read or write here
    if i were you i would restore it

Maybe you are looking for

  • SQL Server Oracle If else differences

    I have a query in SQL Server 2008 that uses an if statement to determine how the SQL is returned. It is fairly complex but here it is in its basic form. declare @granularity varchar(20); begin set @granularity = 'Month'; if (@granularity = 'Month') b

  • I want to make my animation responsive but its not working correctly.

    Here is a better example of what the issue is. http://re.g-ram.co/1uHfiWu The animation is suppose to be right below the navigation. Can anyone guide me on what or how I can center it without having it absolute positioned at the top? Its being writte

  • Dynamic Variant for Report

    Hi, How to put current date in report output through variants. I should not use events, when user selects variants then i should place the current date in my selection-screen. help full information will be appreciated.

  • Cant hear audio when I scrub

    How to hear audio when I scrub in project library. Cant hear any sound when I scrub. I do when it plays back  I move9

  • Handling Units via Idoc

    Hi all, Im trying to create Handling Units in a Shipment with Deliveries by use of idoc SHPMNT05 According to SAP docs I need to fill field EXIDV with $1, $2 etc.... in both segments E1EDT37 and E1EDT43 so that upon posting a HU Identifier number is