IPod Remote application does not work with Ethernet

I can control iTunes on my MacMini from the Remote application on my iPod Touch only if the Mini is connected to the router by WiFi, but not if it connected by Ethernet cable. Unfortunately, I need to connect the MacMini to the router by Ethernet (because of another problem), but this is preventing me using the Remote application.
The wireless access point is an Airport Express connected to the router by Ethernet cable. The iPod Touch communicates with the Airport Express.
The Remote application cannot find my iTunes music library. However it can connect to the MacMini using "ssh". When I select "Add Library" on the remote, the iPod does not show up in iTunes on the Mini. I have tried turning off the firewall in the MacMini but this does not help. However, if I connect the MacMini by WiFi instead of Ethernet cable, it works fine.
My router has a firewall between the Internet and the LAN, but not between the LAN ports. I also cannot see any settings on the Airport Express that might block this connection.
Any help would be appreciated.

similar (unresolved?) issue here https://discussions.apple.com/message/9480306#9480306

Similar Messages

HT1947 The Remote app does not work with my McBook Air !!!!

I have tried several time - but the REMOTE app does not seem to work with Mac Book Air.
Any help ?
Any comments?

why ask in the appletv forum rather then the forum for macbook air or whatever ios device you are running the remote app on?

Osascript for remote login does not work with Leopard

We are testing Leopard on one computer in our labs. The only problem so far is that the osascript that we use to remote login to the computers stopped working (although it works fine on the Tiger machines):
osascript <<EndOfMyScript
tell application "System Events"
keystroke "public"
keystroke tab
delay 0.5
keystroke return
keystroke tab
delay 0.5
keystroke return
keystroke return
end tell
EndOfMyScript
This is a public account with no user password. I've read the discussion below, but have not been able to tweak the command so that it works with Leopard. Any suggestions?
Thanks.
http://lists.apple.com/archives/Remote-desktop/2007/Nov/msg00045.html

I'm having a similar problem - the script below works with my G5 iMacs running 10.4.9 but not the Intel iMacs running 10.4.8. It almost works - the username and password appear in the right boxes, so I run around the room pressing the Return key.
# This script when used with ASR Send UNIX command will login workstations at the LoginWindow.
# The script assumes that the cursor is focused in the Name field.
osascript -e 'tell application "System Events" to keystroke "username"'; \
osascript -e 'tell application "System Events" to keystroke tab'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke "password"'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke return'
Message was edited by: Catocop

Brand new ipod Touch (8GB) does not work with DHCP

I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Remote control does not work with DVD player.

I have a HP Pavilion DV6135nr, the remote control came with the computer, its a RC6. I can not get the computer to recognize the remote control.

Have you tried if this remote works with any other HP notebook? if not, have you replaced the battery on the remote to check its not a battery issue on the remote?
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

JAVA APPLICATION DOES NOT WORK WITH TMG

Dear all,
I'm not able to log into a JAVA APP or a Website using Java (.jsp) pages.
We can open either the windows application and the webpage, but we can't log in.
I'm using Forefront TMG 2010 as a my corporate firewall and all clients are using Windows 8.1.
I've tried everyting I'm able to try.
Could you please help me?
Best Regards
Clemilson
Clemilson Correia IT Specialist

Hi,
Thank you for your post here.
Firstly we need you to collect
TMG live logging.
As you mentioned, you can normally get website but cannot login in, so I think there may be something wrong with the HTTP post method. You may need to capture the packets to see what happened.
You can use
Network Monitor 3.4.
Best Regards
Quan Gu

Will Apple repair an ipod? sound does not work with headphones.

I had this iPod for only a few months. I plugged in my headphones one day and only heard a crackling sound. Is this repairable? I have not damaged it or dropped it since owning the device.

- Have you tried other headphones?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If the iPod (or the Apple provided headphones) are defective and not abused, Apple will exchange it at no cost.

My ipod touch 3g with ios 5.0.1 does not work with the player's car

ios 5.0.1 update from my ipod touch 3g does not work with various audio players Car pionerr with previous updates had not had problems like I can solve this problem???
thanks

I have tried everything and nothing that happened when you upgrade to ios 5.0.1, I want to know if anyone else has had this problem

Ipod does not work with new usb

i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

My 4th gen iPod Touch does not work with Ford sync since updating OS

When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

Have lots of issues with Fords MySync and here's some info that might help....
Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
http://www.ford.com/syncmyride/
or call 1-800-392-3673 Opt 3
A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
Good Luck

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

Something is not configured correctly that is creating issues with your AppleTV. You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable. After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

IPod Remote application does not work with Ethernet

Similar Messages

Maybe you are looking for