Ipod requires disk utility repair after update
I have the 80gb fifth gerneration ipod, i have had issues alrady mentioned error 48, unable to write/read etc. However i restored the ipod and disabled iphoto impport to ipod and they have gone away...
I updated my ipod with some new tracks and ran "verify disk" with disk utility it needed repair due to an "underlying error" sure enough disk repair fixed it but its not long before the error returns after a few more updates. Should i be worried?
more details =
Verifying volume “Martin Paling’s iPod”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking Catalog hierarchy.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 169 instead of 147)
Invalid volume directory count
(It should be 64 instead of 61)
Invalid volume free block count
(It should be 18570151 instead of 18553901)
Volume Header needs minor repair
The volume Martin Paling’s iPod needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Similar Messages
-
Hi Dears
My Apple wireless Mouse and keyboard dose not work since one Month after getting the new iMac 27 !
The Bluetooth assistant could find the Devices for few seconds but can not pairing them ? at least get an error
Operation system is already of version 10.7.5 updated ,but no use ?!
Could getting the Os x 10.7.5 Bluetooth utility repaired after updating to Admin Tools 10.7.5 ?
When not ,than advice me please to repair or solving this problem ,Your problem is likely due to
com.paceap.kext.pacesupport.snowleopard 5.9.1
I would recommend tracking down the app that uses this and unionist all it completely from your computer. Also if you have upgraded the RAM on the machine you may have a RAM falling DIMM or it may have become unseated or it might not be the correct specs for your machine. -
Disk Utility Problem after update itunes to 6.0.3
After undated itunes to 6.0.3, disk utility runs 1/4 and stopped with message "disk utility lost connection with disk management tool, and can not continue....."
and when i Trashed itunes and Disk Utility worked through ok this happed with itunes update 6.0.2 as well did not happen to itunes 6.0.1.
Any body got any ideas, please help!!!!
I'm using os x 10.3.9 runing on PowerBook G4 1.3GHzYinwa, see the workaround here.
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9) -
My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry -
Disk utility repair permissions stops altogether
I tried running Disk Utility Repair permissions and received a grey message box saying it stopped repairing permissions because of the following error:
Error: The underlying task reported failure on exit.
This same error message was repeated in the usual information box that disk utility uses to provide detail about what it is doing.
I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items. I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task). When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
As a not unrelated issue when I attach my ipod touch, itunes says that it cannot recognize this ipod, then after about the third time simply doesn't acknowledge my itouch exists.
everything was working well until i did this large change permissions operation.
So does anyone have any idea what I have done (wrong) and how I can fix it?
thanks
JohnJohn Fountain wrote:
I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items.
Uh-oh. You completely trashed your whole system by doing that. Boot up from your Leopard DVD and restore that last Time Machine backup that was made before you made that mistake. If you don't have any backups you will have to reinstall Leopard.
I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task).
When that happens, just trash the old application first, then drag in the new one.
When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
Changing permissions on the HD and applying to enclosed items hosed your whole system. That's what's causing all your problems. It's doubtful that you will be able to repair it. Restore your system from backup, or reinstall. -
Disk Utility crashes after Leopard upgrade
I have a problem with Disk Utility crashing (error message is the generic "application unexpectedly quit")on launch after upgrading from Tiger to Leopard. I bought the family pack upgrade and had no problem upgrading my G4 mini. However, my Intel mini 1.33GHz, seems to have gotten spooked. For the most part the pgrade was fine but somehow I lost Disk Utility. Has this been seen before? What might I try? Incidentally, the mini has 2Gigs of RAM and plenty of free disk space. The problem occurs in all accounts. Oh, I forgot to mention that I also upgraded to the latest version of Leopard (without checking whether disk utility worked after to install from the disk - so technically, this could be an combo upgrade issue? Having said that, I did exactly the same with the G4 mini and had no issues.
Any thoughts?
Thanks much!
Andrewaspalten wrote:
I have a problem with Disk Utility crashing (error message is the generic "application unexpectedly quit")on launch after upgrading from Tiger to Leopard. I bought the family pack upgrade and had no problem upgrading my G4 mini. However, my Intel mini 1.33GHz, seems to have gotten spooked. For the most part the pgrade was fine but somehow I lost Disk Utility. Has this been seen before? What might I try? Incidentally, the mini has 2Gigs of RAM and plenty of free disk space. The problem occurs in all accounts. Oh, I forgot to mention that I also upgraded to the latest version of Leopard (without checking whether disk utility worked after to install from the disk - so technically, this could be an combo upgrade issue? Having said that, I did exactly the same with the G4 mini and had no issues.
Any thoughts?
Thanks much!
Andrew
Boot from the Leopard DVD - hold down "C" key with disk already in place - and after the language screen, in the menu top left, select Utilities and run the DU from there. Repair HD and permissions.
If you did a "merge" install from Tiger (default) then you may have brought some things along that Leopard does not like.
Did you have any "haxies" or other old 3rd party apps installed in Tiger? Most of them won't work with Leopard and need to be replaced or removed. -
Can you restore an iPod using Disk Utility?
I put a new hard drive in my 1st gen iPod.
It still shows up in iTunes and music can be transferred over, but when disconnected the iPod shows a folder and exclamation mark so I can't navigate to / listen to any music.
As it's first gen ipod I can't get it to restore or update via iTunes - no options show up to restore or update the software.
Is there any other way I can restore or update the iPod - via disk utility or some other means?
I do have a back up of all the original files that were on the iPod hard drive before I swapped it over.Hi - thanks, but unless I'm reading the article wrong that won't work for me because you need to use iTunes to restore the iPod and I can't do this - as it's a 1st gen iPod it will only sync with an old version of iTunes and the 'update' and 'restore' tabs don't appear.
So, I'm looking for a way to restore the iPod without having to use iTunes. -
Disk Utility repairs permissions; 1 hour later they're un-repaired again.
(March 2009 24" iMac. Lion 10.7.3)
I repair permissions on Macitosh HD (boot volume) every-other week. I've noticed that the same permissions seem to need repair each time. Here are the last seven lines from the Disk Utility window from the May 19 run:
One hour later, I repeated the operation. Here are the last seven lines:
I might be overly sensitive, but I detect certain similarities between these results. In fact, it looks like Disk Utility repairs exactly the same permissions every time and those permissions are corrupted shortly after they are repaired.
What's going on here? Should I be alarmed? Or should I panic?I'd like to delete this post (if I knew how). There are several other threads on this topic, and other contributors report exactly what I observe. It turns out it's a harmless artifact of upgrading from 10.5 to 10.6 to 10.7, rather than doing a clean install of Lion. This article is reassuring: http://support.apple.com/kb/TS1448
I shoulda searched more thoroughly before posting. -
Cannot format iPod using Disk Utility
My iPod (5th Generation) has been displaying a -48 error for weeks, and i tried to follow the advice to format my iPod using Disk Utility. However, after leaving my iBook 1.2Ghz G4 on over night with Disk Utility erasing it, the little bar was still stuck on partitioning, never moving. What can i do?
try reset in iTunes. Then follow the steps in Jason Creasey's excellent procedure in the long thread ref Code -48. Good luck.
-
Disk Utility: "Repairing disk failed with error Could not unmount disk"
Disk Utility: “Repairing disk failed with error Could not unmount disk”
Hi. I’ve been experiencing some mildly squirrelly behaviour with my system (vide infra) so decided to repair the two internal hard drives on my computer. The primary hard drive is a 74.53 GB ST380013AS that came with the system; its S.M.A.R.T. Status is “verified” and Disk Utility repairs permissions just fine. However, the second internal drive (Maxtor 6L250S0, 233.76 GB, lower Bay, Journaled HFS+), despite being verified by S.M.A.R.T. status and apparently running OK, fails to unmount when I ask Disk Utility to repair it- I get the above error message in red. I have repaired this disk with DiskWarrior (v3.03) and all appears to run AOK. Can anyone tell me why I cannot get Disk Utility to run on this secondary (eg, non-startup) disk? I have tried many times and the error is reproducible. Thank you!
G5 1.6GHz PPC, 1 GB RAM, running OS 10.4.6Thank you for these useful links!
For others who have this issue, I also found very helpful advice given to this question on the MacFixIt forums by MicroMat Tech3 at
http://www.macfixitforums.com/php/showthreaded.php?Cat=&Board=tiger&Number=76265 1
He said: "Use the lsof command to find the open files on a volume that does not unmount or eject. Open Terminal, located in /Applications/Utilities. Type: sudo lsof | grep Leave a space after the p in grep, then drag the icon of the problem volume to the Terminal window. The pathname for the volume is pasted in for you; press Return. Then enter your administrative password at the prompt, and press Return."
At this point, one now has a list of the open files/processes on the volume that will not unmount. You can use Activity Monitor to terminate these processes if you wish, and then the volume will unmount as it should. -
Ipod classic won't mount after updating to itunes 11.0.2
ipod classic won't mount after updating to itunes 11.0.2.
I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
I've restarted the ipods 10+ times each.
All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
Machine is a Mac Pro running 10.6.8.Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!! -
Erased free space in Disk Utility, and after it finished it kept a DMG there.
I erased free space in Disk Utility, and after it finished it kept a DMG there called "DeveloperDiskImage.dmg", why is it left behind? can it be deleted? how? if erasing free space is supposed to help get memory and remove all the files truly, it shouldnt be creating anything, it created a DMG at the start, but it went away, after a hour and a half it made the DeveloperDiskImage, i went to eat dinner and when i came back it was done but that was left.
Delete it. Erasing the free space isn't supposed to free up any space; it's there in case someone deleted a file insecurely when they meant to securely delete it.
(65417) -
Disk Utility/Repair Help Please...
Hi
I have been having some issues with a Kernel Panic on my MBP. I am trying to solve them with the help of the X-Lab, but when I do the disk utility>repair permissions I get the following messages:
Repairing permissions for “Macintosh HD”
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Permissions repair complete
Does anyone think this may be a contributory factor. If it is unlikely that these are not to do with the Kernel Panic, any ideas as to what they are and what I should do.
many thanks in advance
RobThose messages are normal and may be ignored.
This article is for Leopard, but still holds true for Snow Leopard:
http://support.apple.com/kb/TS1448 -
My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~
Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Does disk utility repair delete any files on external hard drive?
Does disk utility repair disk delete any files on the external hard drive?
diskutil list
Last login: Sun Dec 21 16:07:46 on console
Justins-MacBook-Pro:~ justinmontoya$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *750.2 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 749.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *748.9 GB disk1
Logical Volume on disk0s2
4A646B29-3794-4A34-AC98-C0FB505D402B
Unlocked Encrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *500.1 GB disk2
1: DOS_FAT_32 500HDD WD 500.1 GB disk2s1
Justins-MacBook-Pro:~ justinmontoya$
Maybe you are looking for
-
Edges of video seen when using Lower Third
Hello All, When I use the lower third, and have the crop wide open on the left and right, I see a sliver of video on the outside of the Lower Third bar. Is there a way to adjust this? Do I need to use a matte and text rather than Lower Third? Thank y
-
Hi, I have created a web service using XI( by exposing an outbound interface. When seeing the target url in web browser, I'm getting the following text ---> <b>Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_06_REL/src/_
-
When I click on the music, HD, and photos category in my finder window, the entire window flickers. I ran a hardware test, and everything came up fine.This problem seems to gradually be getting worse.
-
Approval for Deviation from Budget
Hi, We are implementing the approval workflow for our budgets. I am testing the SAP deviation from budget template in 8.8. However, it appears to only activate when it deviates from the annual budget. Can I set an approval process for when the docume
-
Who else is using Java Desktop System?
Is anyone buying this thing?