"ipod requires itunes 7"

i had itunes 7 on my comp, which is total rubbish for playback so i have reinstalled itunes 6 and the playback is way better and it doesnt skip every two seconds.
But now when connecting my ipod it says cannot use craigs ipod requires itunes please download.
Anyone know anyway around this cos i really really dunt wanna put itunes 7 back on cos its rubbish.
really need help here.
xx

Well, 1) that doesn't help me with my problem so there wasn't much point posting it and 2) by "rubbish" i mean not very good, bad - if you would. Or - Rubbish n - waste matter; rubble; litter; trash. As i explained in the original post, playback was the issue, in particular chronic skipping of playback, which i don't get in itunes 6 and its actually a common problem if you read the boards.

Similar Messages

  • Itunes will not open and does not recognize ipod, required itunes component is not installed 42404

    Itunes was first getting required itunes component not installed.  Click ok and could go to itunes.  Determined itunes was not recognizing Ipod, computer does.  Itunes diagnostics show problem Ipod not found.  Now Itunes is not opening.  Have installed Itunes again with repair option, then uninstall/install option.
    Then manually unintalled Itunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Bonjour, and Application Support.  This is a Windows 7 Toshiba PC.  Has anyone had this happen or have any ideas?

    hi bummed! (you do realise that you're stuck with that alias for the forseeable future, don't you?)
    B was asking another user if iTunes.exe was appearing and then disappearing in the Task Manager. I am having the oposite issue in that I cannot End Task in the Task Manager on iTunes.exe. What is up?
    hmmm. if that's going on, then we'd better check up on these two possibilities first:
    http://docs.info.apple.com/article.html?artnum=302775
    http://docs.info.apple.com/article.html?artnum=302386
    keep us posted.
    love, b

  • Pop-up "This iPod requires iTunes 7.6 or later"  :(

    I'm using iPod Classic 80GB and I usually update it when new update is available through iTunes.
    Yesterday a new update showed up so I clicked "download & install". But then THE PROBLEM occurs.
    I'm using iTunes 7.5 and this new version of iPod will only work with iTunes 7.6 or later. So my iTunes cannot detect the iPod.
    I download iTunes 7.7 happily, and when I tried to install, it doesn't work! It says this version of iTunes will only work on Windows XP Service Pack 2 or Vista. I thought I had SP2, I don't know why it showed up like that. Or if I don't have SP2 is there any way I can install iTunes 7.7 without having to use SP2???
    Or is there anyway I can degrade my iPod classic to my previous version??! I don't even know which version I've upgraded it to because I don't know where to check. I'm not good at these things (T_T) can someone please help me.
    And if I degrade, will all my songs be deleted?! I don't have the songs left in my computer....
    faint

    If you open iTunes and click on Help>>About iTunes
    You should see the version: 7.7.1.11 which is the latest version
    If not, just to be absolutely clear about what you did, did you download the latest iTunes installer from here:
    http://www.apple.com/itunes/download/
    It is generally best to save the file rather than run the install via your browser. Click save when prompted - the desktop is a good place to put it.
    When you ran the installer did you see the install go through to completion - there should be a progress window telling what it is up to.

  • My Ipod requires i tunes version 10.6.3 or later to be seen on itunes in my mac, I haven't been able to do that, how can I?

    my Ipod requires i tunes version 10.6.3 or later to be seen on itunes in my mac, I haven't been able to do that, how can I?

    You get it here:
    iTunes 10.6.3

  • IPod Touch iOS6 cannot be used because it requires iTunes version 10.6.3 or later.

    Hi, just now I've updated my iPod Touch 4th generation to iOS 6 and I backed it up on iTunes before. Now I want to restore that backup but when I plug it onto my iMac (running OS X 10.5.8), iTunes pops up a message that says: "The iPod "Trang's iPod touch" cannot be used be because it requires iTunes version 10.6.3 or later. Go to www.itunes.com to download the latest version of iTunes". My iTunes right now is iTunes 10.6 (40) if that helps. I pressed iTunes > Check for Updates... then it says that I have the current version! I did the same with apple logo > Software Update, and nothing new. I then went on itunes.com and the newest version is 10.7, except I don't want to risk to download it and lose all my music files again, and it's not even compatible with my iMac!
    Like said, my version cannot sync over wi-fi because iCloud also isn't compatible with Leopard. What do I do? Do I HAVE to buy an update for Snow Leopard then be able to sync my iPod? They don't even sell physical copies in stores anymore.. now I'm stuck with a clean state iOS 6 iPod. If I knew, I wouldn't have updated it. Is there any way to go back?
    Regards

    I'm having a similar problem, but moved on a few versions. I've been given an iPod nano, but when I try to add music to it I get an error message saying, "The iPod “iPod” cannot be used because it requires iTunes version 10.7 or later" and inviting me to download the latest version. However, I'm using iOS 10.5.8, and the computer can't update to a newer version. That, in turn, limits me to versions of iTunes no later than 10.6.3.
    Is there a way to make the new iPod connect to my still very much functional but not new Macbook? All help gratefully received!

  • I cant' sync my ipod because it says"The iPod cannot be used because it requires iTunes version 10.6.3 or later. I can't download it because my MAC is version 10.5.8 and it won't accept the newer version of itunes. Any suggestions?

    I cant' sync my ipod because it says"The iPod cannot be used because it requires iTunes version 10.6.3 or later. I can't download it because my MAC is version 10.5.8 and it won't accept the newer version of itunes. Any suggestions?

    If you're using a fourth generation or earlier iPod touch, click here and download the software.
    If you're using a fifth generation iPod touch and an Intel Mac, buy Mac OS X 10.6 from the online Apple Store and run Software Update.
    If you're using a fifth generation iPod touch and a PowerPC Mac, buy a newer computer.
    (73046)

  • IPod cannot be used because it requires iTunes 10.0 or later on Tiger

    I just purchased a new iPod touch for a friend and she is getting the following error from iTunes when she connects the iPod to her MBP:
    "The iPod "iPod" cannot be used because it requires iTunes version 10.0 or later. Go to www.itunes.com to download the latest version of iTunes"
    She has an Intel Core 2 Duo Macbook Pro, running Mac OS X 10.4.11 and Quicktime Player 7.6.4.
    Is she able to sync the iPod and iTunes on her Mac running Tiger? And if not, is there an alternative that will allow her to sync?
    EDIT: Software update says everything is up-to-date.
    Thanks!
    Message was edited by: Highway

    She needs to upgrade to Leopard.
    As per Apple's website:
    Mac requirements
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10 or later
    Broadband Internet access is required (fees may apply)

  • "IPOD can not be used because it requires iTunes version 7.6 or later"

    I keep getting this message: "IPOD can not be used because it requires iTunes version 7.6 or later". I have intstalled version 8.0 but it still will not show this new 3rd generation nano in the source list when I plug it in. We have to other ipods (original video version and 2nd generation nano) and they work fine. Please help if you can. My 10 year old daughter has this new gift that we can't figure out!!

    I am having a similar issue. My kit is as follows:
    Laptop with Windows XP Professional Service Pack 1
    iTunes 7.5
    3rd Generation 8Gb iPod Nano (v1.1.2 PC)
    5th Generation 30Gb iPod with video (there are no issues with this)
    A while back, on connecting the iPod Nano to my PC, i was prompted to upgrade the software. Clicked "yes" and the software installed. Now when I connect the iPod Nano to my laptop I get an error message in iTunes saying "iPod cannot be used because it requires iTunes version 7.6 or later". I am unable to download any later versions of iTunes, however, as they require Service Pack 2 for XP (and I cannot install this for a number of reasons).
    Is there any way I can revert the Nano to its previous software level as I am currently unable to add/remove any music to it?

  • I want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

    i want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

    Success!
    By completely removing all reference to apple or iTunes/iPod/ Safari etc from my computer, it has at last installed.

  • My Ipod Shuffle requires Itunes 10 but with my Mac OS 10.4.11 I can not run itunes 10. Is there another way to load this ipod shuffle without updating to Snow Leapord?

    My Ipod Shuffle requires Itunes 10 but with my Mac OS 10.4.11 I can not run itunes 10. Is there another way to load this ipod shuffle without updating to Snow Leapord?

    Sorry Glen, but there is not. And you don't have to upgrade to 10.6 (Snow Leopard).  You need at a minimum of 10.5.8 (Leopard).
    B-rock

  • I'm getting this message "The iPod "Sage's iPod Touch" cannot be used because it requires iTunes version 10.6.3 or later. " But cannot update iTunes because my OS is 10.5.8

    I'm getting this message "The iPod “Sage’s iPod Touch” cannot be used because it requires iTunes version 10.6.3 or later. " But cannot update iTunes because my OS is 10.5.8.  How do I use my iPod with my iTunes?

    Solved.  Not sure what I finally clicked on on Apple.com but found iTunes 10.6.3 and was able to download that for free and now my iPod can sync.

  • Can not synchronise my ipod with itunes. the required medium can not be found

    Can not synchronise my ipod with itunes. I receive the message the required medium can not be found

    Is it along the lines of the "required disk cannot be found?"  What OS are you using and are you running the latest version of iTunes?  I assume you have tried multiple USB ports as well as tried using a different USB sync cable to rule out a damaged/faulty cable?
    Do you have any other USB devices plugged in while you try to sync your iPod?
    B-rock

  • Problems using my new iPod classic, says it requires iTunes version 10.7!

    I've just bought an iPod classic to store my music collection, but it says it can't be used because it requires iTunes version 10.7 or later. (I'm currently running iTunes version 10.6.3) I can't download iTunes version 10.7 because my iMac is running on OS X version 10.5.8. I hadn't anticpated this problem as the iPod classic is a relatively old model, not updated since 2009. I didn't really want to buy new operating software for my Mac as well. Any ideas what to do please?

    Whatever you do, DO NOT update to iTune 11.  It won't work with iPod Classic.

  • I recently updated my Ipod Touch to the ios 6 and now, i cant seem to use it with my itunes! A notification keeps coming up whenever i connect my ipod to itunes that a new version of itunes is required but it is the latest version alrdy. HELP!

    Hi all, I've recently updated my ipod touch to the ios 6 and now i cant seem to use it with my itunes
    whenever i connect my ipod to itunes, a notification saying that i need a newer version of itunes. However, when i check itunes for software updates, it seems i have the current version of itunes
    I am at a lost of what to do as i can no longer sync my ipod touch with my itunes.
    Help Pls!
    thanks

    You might tell us many more things so we don't have to guess and might be able to help.
    What computer do you have?
    What iTunes are you running now?
    What OS X system are you running are your computer now? Or is this a Windows machine?
    Let us know a little more info.

  • I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

    I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
    Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
    I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
    I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
    I was taken through msconfigure and adjusted the startup tab but still no joy.
    In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
    Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
    The 1st message is;
    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application  Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    When I click ok the next message that appears sometime later during the install is;
    Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
    The options I have are to abort, retry or ignore. If I retry the same message comes back and if I  abort or ignore the download continues and I then get the following message:
    'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
    After attempting to reinstall itunes only some components were installed however itunes would not open.
    It would appear many people have experienced problems with this latest download!

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for

  • Allow to create a purchase order with purchase requisiton item deleted

    Dear all, I have a question about creation purchase order process. Firstly, I have a purchase requisition with 2 items, first of them is deleted. If I try to create a purchase order thru transaction ME57N with the previous purchase requisition, I can

  • Clicking noise when using bluetooth in car.

    HI, just purchased a new Buick with bluetooth system, added my Iphone and now when in the car callers hear a clicking sound when in conversation. Did not do when I was using the phone in older car. Any suggestions?, thx Steve

  • CC Save as CS6

    My Cloud trial expired before I was able to test the CC products. Is there any chance of saving your projects as CS6 compatible in  PrPro and After Effects CC? Just in case you decide to terminate your CC membership after the 12 months contract.

  • Equivalent of Informix's onstat command

    Is there a equivalent of onstat command line in Informix ? onstat helps give lots of information like: - Session id and the sql that session is currently executing. - Gives the space left in tablespace - Threads in waiting, sleeping state - Informati

  • How add a new icon in the title bar?

    does anyone know how to change the default "java icon" that appears on the title bar of a Window (in an application Frame)?