IPod requires reset for every new sync

Well, that's it, really.
My late `06 iMac & early `06 60gb / with video iPod are both up-to-date on software, yet everytime I hook it up for an update/sync the "do not disconnect" symbol sits there . . unflashing . & nothing ever happens.
Once I do a reset, it's fine & everything proceeds normally, but this shouldn't be required.
Even another sync 12 hours later, & it's the same sequence.
any ideas or similar scenarios out there ?
-=TIA=-
~~~=Dave

well,
It doesn't seem required if everything works fine after the reset.
I was hoping more for someone else w/ the same deal...you know, I'd prefer to know "what's goin' on", rather then just pave over it w/ a restore.
Why come I didn't get an email w/ your reply ?. . even the little binoculars are broke ?

Similar Messages

Mail to be send for every new pur group

Hi ,
I have to send mail to recipients of the purchase grp ekgrp..
right now im able to send mail to all purchase orders of the pur.group, individually.
but my requirement demands that
the mail has to triggered for every new pur.group, all the pur orders wthin that group has to come in the mail body of that purchase group.
now actually one loop is already running, plz avoid nested loops.. and help me out asap.
I give you the following code .
all respective data declared above.
FORM form_send_mail .
SELECT ekgrp smtp_addr FROM zmmtr_ekko INTO TABLE it_zmmtr_ekko.
SORT it_final by ekgrp.
LOOP AT it_final." into wa_final.
    CLEAR: wa_objtxt,wa_reclist,wa_doc_chng,wa_objpack,g_tab_lines.
    REFRESH:it_objtxt,it_reclist,it_objpack.
Mail Subject
    wa_doc_chng-obj_descr = c_subject.
*Mail sensitivity
    wa_doc_chng-sensitivty = c_p.
*Fetching employee name
    READ TABLE it_zmmtr_ekko WITH KEY ekgrp = it_final-ekgrp.
    IF sy-subrc = 0.
      g_email = it_zmmtr_ekko-smtp_addr.
    ELSE.
      CONCATENATE c_message it_final-ekgrp INTO g_message SEPARATED BY space.
      WRITE: g_message.
      CONTINUE.
    ENDIF.
    MOVE c_hi TO wa_objtxt.
    APPEND wa_objtxt TO it_objtxt.
    CLEAR wa_objtxt.
        APPEND wa_objtxt TO it_objtxt.
      CONCATENATE c_po it_final-ebeln INTO wa_objtxt SEPARATED BY space.
      APPEND wa_objtxt TO it_objtxt.
      CLEAR wa_objtxt.
     APPEND wa_objtxt TO it_objtxt.
    DESCRIBE TABLE it_objtxt[] LINES g_tab_lines.
    READ TABLE it_objtxt into wa_objtxt index g_tab_lines."INTO wa_objtxt INDEX 1."g_tab_lines.
    wa_doc_chng-obj_langu = c_en.
*Size of message body
    wa_doc_chng-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( wa_objtxt ).
*Creation of the entry for the compressed document
    CLEAR wa_objpack-transf_bin.
    wa_objpack-head_start = 1.
    wa_objpack-head_num = 0.
    wa_objpack-body_start = 1.
    wa_objpack-body_num = g_tab_lines.
    wa_objpack-doc_type = c_raw.
    APPEND wa_objpack TO it_objpack.
*Completing the recipient list
*target recipent
    REFRESH: it_reclist.
    CLEAR: wa_reclist.
    wa_reclist-receiver = g_email.
    wa_reclist-rec_type = c_u.
    APPEND wa_reclist TO it_reclist.
AT NEW ekgrp.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = wa_doc_chng
          put_in_outbox              = c_x
          commit_work                = c_x
        IMPORTING
          sent_to_all                = g_sent_to_all
        TABLES
          packing_list               = it_objpack
          contents_txt               = it_objtxt
          receivers                  = it_reclist
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    ENDAT.
    CASE sy-subrc.
      WHEN 0.
          WRITE: / c_mail ,g_email,c_mail0,it_final-ekgrp, it_final-ebeln, it_final-lifnr.
          SKIP 1.
      WHEN 1.
        WRITE: / c_mail1."chk mail content and do it..
        SKIP 1.
      WHEN 2.
        WRITE: / c_mail2.
        SKIP 1.
      WHEN 3.
        WRITE: / c_mail3.
        SKIP 1.
      WHEN OTHERS.
        WRITE: / c_mail4.
        SKIP 1.
    ENDCASE.
ENDLOOP.
WRITE:       / c_mail5.
SKIP 1.
ENDFORM.                    " FORM
Rgds,

The newly created database should automatically get picked up the maintenance plan.
http://sqlmag.com/sql-server/inside-database-maintenance-plans
No need to manually update the plan. I feel you need to have valid full backup for its successive Diff or Transaction log backup.
Are you getting any error in the job history?
-Prashanth

Modem - router getting reset for every 15 mins

My modem and router gets reset for every 15mins and every time I call Comcast not getting proper support . Can someone hear this. This happens every weekend.

freezing at regular intervals:
:http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions.

Changing customer number in alv top of page for every new customer

hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.

You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a®

How do i increase my key ID +1 for every new user

what iam trying to do is that for every new user that register on my app will get a key id.. that is +1 higher then the old highest id.. i have done this i JavaDB but in mysql i get an exception
here is my sql Q:
sql = "insert into " + mytest_TABLE + "(" + mytest_ID + ", " + mytest_NAME
+ ") values ((case when (select max(" + mytest_ID + ") from " + mytest_TABLE + ")"
+ "IS NULL then 1 else (select max(" + mytest_ID + ") from " + mytest_TABLE + ")+1 end), "
+ encodeSQL(firstName) + ")";
here is my exception:
by the way mytest is my table..
java.sql.SQLException: You can't specify target table 'mytest' for update in FROM clause
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:946)
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2985)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1631)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1723)
at com.mysql.jdbc.Connection.execSQL(Connection.java:3250)
at com.mysql.jdbc.Statement.executeUpdate(Statement.java:1355)
at com.mysql.jdbc.Statement.executeUpdate(Statement.java:1270)
at cont.tt.updateContact(tt.java:49)
at cont.tt.jButton3ActionPerformed(tt.java:179)
at cont.tt.access$200(tt.java:6)
at cont.tt$3.actionPerformed(tt.java:140)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6038)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
at java.awt.Component.processEvent(Component.java:5803)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4410)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
at java.awt.Container.dispatchEventImpl(Container.java:2102)
at java.awt.Window.dispatchEventImpl(Window.java:2429)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
sry for my bad english..
really hope someone can help me out

You need an 'Identity' column. In MySQL, you need to enable autoincrement and don't insert a value in the column while adding records; MySQL will auto increment the value.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

Include report header for every new page.

Hi expert,
I have create a report with two buttons, 'previous page' and 'next page'. when i click the buttons, my report will go to another new page. I am using NEW-PAGE in my report.
My problem now is, how can i include TOP-OF-PAGE for every new page in my report? When i click on the button, the TOP-OF-PAGE will not trigger by my report.
Pls advise how to solve it.
Thanks in advance.

top-of-page will get triggered in spool request only when u run in background.

According to material num,for every new material num one line space.

Hi,
please give suggestion how to get vertical lines without breaking as shown below.
I want according to material number(AT1),for every new material number one line space have to be there.
I used 'skip' so the verical line is breaking for every new material.
Material Number |   Material Description
_____________ |______________________________________________
|    AT1                  |   Catalyst - 18165-RNA-A013-Y2
|    AT2                  |   Catalyst - 18165-RNA-A013-Y2
|    AT3                  |   Catalyst - 18165-RNA-A013-Y2 (COPY)
|    AT4                  |   Catalyst - 18165-RNA-A013-Y2
|    AT5                  |   Catalyst - 18165-RNA-A013-Y2
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
| CGW0001              SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
| CGW0001              SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
I need line continous but for every new material to material gap.
Thanks,
sree.

Hi,
write code like this.
write : /1 sy-vline,120 sy-vline.
give the line size for ex 120
reward if usefull

Any way to PERMANENTLY zoom Firefox a certain amount, rather than having to re-zoom-in again every time for every new webpage?

Any way to PERMANENTLY zoom Firefox a certain amount, rather than having to re-zoom-in again every time for every new webpage?
== This happened ==
Every time Firefox opened

https://addons.mozilla.org/en-US/firefox/addon/6965
http://urandom.ca/nosquint/

Trigger SEQ column for every new value of ID it should start from 1

I have
table table_A
(ID NUMBER,
SEQ NUMBER,
DETAIL VARCHAR2(2000))
In this table ID and SEQ are combined primary key
Data looks like
ID     SEQ     DETAIL
1000     1     COMMENTS1
1000     2     COMMENTS2
1001     1     COMMENTS3
1002     1     COMMENTS4
1002     2     COMMENTS5
1002     3     COMMENTS6
1003     1     COMMENTS7
I have ID as oracle generated seq Number , but I need trigger to generate SEQ column value for every new value of ID it should start from 1

This is probably not something you would want to do in a trigger. You would generally be much better off storing ID and detail in the table and generating SEQ in a view, i.e.
CREATE VIEW my_view
AS
SELECT id,
       DENSE_RANK() OVER( PARTITION BY id ORDER BY <<something>>) seq,
       detail
FROM table_AUnless you can guarantee that only one session will be inserting data at a time, I don't see how you could make a trigger work here.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.

I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

Can I exchange my iPod 5th gen for a new one

Can I exchange my iPod 5th gen for a new one

If you are in the return periiod for where ever you purchased the iPod and there is nothing physically wrong, they may allow you to return it, then you can purchase a new one.
Here's the return policy for Apple in case you purchase it directly from Apple: http://store.apple.com/us/help/returns_refund
If the iPod has an issue, the seller may not allow you to return it and you may need to obtain service from Apple in order to get a working iPod: http://selfsolve.apple.com
I hope this helps.

IPod Nano resets for no reason

I have an 8gb 3gen Nano.
Until about 5 days ago I had encountered no problems. In the last 5 days though the iPod has taken to randomly reseting. I have tried resetting, restoring and reinstalling both the iPod and iTunes.
When connected to my pc, it starts iTunes, syncs and then disconnects automatically, generally after this it restents (and I have to select my language again). Some songs (specifically purchased songs) won't play from 'Cover Flow' trying causes the iPod to reset, however the same songs will play ok if they are contained within a playlist.
Any suggestions?

It might be a litle more complicated as I discovered it's not a hardware bug, but something that afects a lot of iPod Touch around. Here is another thread in this forum:
http://discussions.apple.com/thread.jspa?messageID=7070990
Best regards, and cry for HELP to Apple. C'mon, this is WAY behond expensive device to have this stupid bug. Apple should solve this NOW.

Variable field in Header for every new page

Hi Friends.
I am printing a new page on every new material no encountered . At the same time the HEADER has a field called Container name which is different for each material so this header field needs to be update each time when a new page is called to print .
How to handle this ? Please advise .
In my z calling program I am using this logic .
If old_matnr <> new_matnr
PERFORM PRINT USING 'MAIN' 'NEW_PAGE'.
endif.
Thanks!!
Hari

If you have created a seperate window for header then you cant pass a changing field . Instead keep that header window in the main window that will serve your purpose.
you need to put the condition
if &page& eq '1'.
header code.
endif.
Reward points if useful.
Regards,
Nageswar

Opinion: new Package for every new custom Component?

Hi there,
I am just thinking of some possibilities to structurize my Components I made.
I wonder if it is useful/good programming to define a new package for each new custom Component?
So if I define a new MyComponent class extending JFrame should I make a new package:
"mycomponent"
containing these subfolders:
"view"
"model"
"controler"
subfolging "controler" in:
"listeners"
"adapters"
"events"
Is there any sense to do so? I think this would be the best way to structurize one's components.
But if you do, you have to include millions of packages if you want to use one of these components :(.
Please post, what you think.
Thank you
Sincerely
Karlheinz Toni

nope ;). I would most certainly not want to put every file in a single directory.
But I like sturctured things. If things belong to each other, it should be visible at once, that they have something to to with each other. And the best method I can figure you is putting them in one package.
The subpackages should be created, because of the model, that is used for all swing componentd (UI-delegete, MVC...) so that each structural component is where it belongs to.
I don't like it if tere are 100 events one object could possibly create and you don't know the events from the component (of course you can guess by the name Event :)), but if they are in the same package, you would have to scroll a long way to get the thing you want (either m, v or c).
So this is why I would do it ;).
Anyway: do includes make the program run slower (I have read many threads about it, but there are way to many opinions, so I would be grateful if you post your opinions here, thx ;).
Thanks for your answer,
Sincerely
Karlheinz Toni
p.s.: why wouldn't you put them in a seperate directory (just overkill?), would you use classes that are structured like this if you are looking for a implementation of something and find it in this structure?

IPod Photo resets repeatedly w/ new 1.2 software

Ipod software version 1.2 was AUTOMATICALLY installed on my iPod the last time I connected it to computer to update the playlist.
Ever since the new software update, my 40GB iPod Photo resets whenever the Hold switch is engaged and then taken off... VERY annoying... Never did that before until the new software....
Any ideas ?

This is also happening to me. Also since this update and i tunes update 6.0., my logic3 istation no longer updates via firewire....ahhhhhggg Anyone else with this problem?

IPod requires reset for every new sync

Similar Messages

Maybe you are looking for