IPod resets, but the Click Wheel does not Function

Just like title, my iPod resets, but when the Menu screens comes up, nothing happens, the backlight dims and I push the hold on and off and the backlight refreshes. I tried leaving the hold on for 5 minutes, the off, no success, any ides?

Have the same problem, even after replacing the click wheel.

Similar Messages

I need to hard reset a Palm TX but the Power button does not function.

I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
Post relates to: Palm TX

Hi,
PowerBtn from the Canuck Software HomePage.
NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
http://www.canuck-software.ca/
PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
This setting will remain active while 'Enable' on the PowerBtn screen is active.
The user can select 'Disable' on the PowerBtn screen.
The setting will survive a Soft Reset. (Hi PG )
If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
All the best, woz of oz
Post relates to: Palm TX

I dropped my Ipod and now the click wheel is not working anymore

Hey! I hope you can help me! I dropped my Ipod today, and now the Click wheel doesn't work anymore! The IPod broke open, but I put it together again! When I came home I connected it with the computer to see if "its" alive. And it connected and updated and everything was okay, instead of the Click wheel control! When it dropped there was "Hold" and now I can't deactivate "Hold". So I think, maybe the click wheel doesn't work because "Hold" was activated the moment the ipod dropped! BUt I don't know! Maybe something inside the ipod a soldering joint got torn apart, or something, I don't know! I just know the click wheel doesn't work, anything else seems to be okay! Can anyone help me???

hey and whops about dropping your ipod...
heres what i think but im not an ipod know it all so what i say might not help but any way...
And it connected and updated and everything was okay, instead of the Click wheel control!
well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
Hope it fixes

The menu button on the click wheel does not work!!!

I just got my I pod nano Black(2gb) and for some weird reason the 'menu' button on the wheel just does not respond. So i cannot go back to the previous menu or reset. What do i do????

See this.
How to reset the iPod if the buttons appear frozen.
It may take quite a few attempts and is best done connected to power.

Ipod click wheel does not work at all..

I gave a friend of mine my 4g photo. It worked for him for a few days and then stopped. He brought it back to me and I restored it twice back to factory settings. Still nothing. The other weird thing is when you cycle between hold and on, it starts the ipod like it is an on and off switch. The click wheel does not respond, and the hold thing is just weird. I just would like to know if this is a hardware problem, and if there is anything I can do to get it up and running again.. thanks...
Macbook Pro 15" Mac OS X (10.4.8)

hi muddy angel, recently i had a problem that sounds similar. my well cared and little used 40gb ipod didnt respond to the clickwheel -no reason that could be recognised. gravis in berlin, germans probably biggest apple dealer, checked the item. they told me it would be a rare, but well known very unlucky thing that clickwheels sometimes just give up their functions for unknown reasons. unfortunately my clickwheel did so, after the warrenty has run out a couple of weeks ago and as well annoying is the fact that a replacement of the clickwheel is horrible expensive. so, if you have the opportunity to have your ipod checked by a hardware pro - try it.

My 4th gen nano has locked up and the click wheel doesn't function, is it dead?

Hi my 4th gen nano stopped working, the screens ok with no error messages but the click wheel no longer functions other than reseting. I've set it back to default ok but still no good as it's stuck on the language page. Is it dead??
Pete.

Hi jim,
If you are having issues resetting your iPod Nano, you may find the following article helpful (it should be listed under iPods with click wheels):
Apple Support: How to reset iPod
http://support.apple.com/kb/ht1320
Regards,
- Brenden

Click wheel does not appear to be working

My click wheel does not appear to be working. I can however, press "menu" & the center button at the same time to reset it. Any suggestions on how to get it working again?

Have you tried doing a RESTORE on the iPod when plugged in and showing up in iTunes?
Patrick

Click Wheel does not work

My ipod turns on, but the click wheel no longer works. Anyone know how to fix that?

Alright.
1. Snap the hold switch from off to on to off.
2. Press Menu + Select (if the buttons still work)
3. Hold Menu + Select until the image on the screen disappears and is replaced by an Apple Logo
4. Quickly hold Previous + Select while the Apple Logo is visible.
5. You should enter Diagnostic Mode.
6. Navigate to IO
7. Navigate to wheel
8. Run tests.
9. Post results.
I undersand you may not be able to do much of the above because your clickwheel may have a hardware error, but try anyways

ITunes will not open and tells me to use the "information" to open in 32 bit rather than 64. but the information pane does not offer that option ...

I am trying to open my iTune 10.4 on my mac mini which is running OS 10.6.8, and I get the message that I need to use the information pane to open in 32-bit rather than 64. But the information pane does not offer this option. I'm in a vicious circle of opening, getting this message, then having to close. Did this come about after the June update of iTunes? And if so, why haven't they fixed it? And what can I do? You'd think Apple would want be to be able to spend my money in their store ...

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

I am trying to delete some aps, but the delete "X" does not come up when the ap is pressed. Anyone know how I can fix?.

Hi, I am trying to delete some aps, but the delete "x" does not come up when the ap is pressed. Anyone know how to fix. Also, my ipod is turning off on its own and won't power back on unless I plug it in although it is fully charged.

For the apps:
- You can't delete the apps that came with the iPod
- Go to Settings>General>Restrictions and see if there is the Restrictions set that prevents deleting apps

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.

I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

JButton tool tip shows up but the rollover icon does not.

I put a JButton into a cell in JTable. When the mouse moves over the button, the tool tip shows up, but the rollover icon does not.
If I click the button, then both tool tip and rollover icon will behave correctly.
Is that a bug?

The JTable doesn't know it's a button. It knows it's a JComponent, and a TableRenderer only. Tooltips are from JComponent. JTable can't sit there and analyze the renderer components to cover all the possible bases for what a component might do.
The key thing to understand is that the JTable basically takes a screenshot of the returned component.
The only way I know to do what you want is to add a mouse listener to the table, figure out the cell moused over, and update something in the model that can tell the renderer component to go to a mouse over state for table to repaint with.

IPod resets, but the Click Wheel does not Function

Similar Messages

Maybe you are looking for